Parker Compact EHA

Electro-Hydraulic Actuators
Parker Hannifin’s Oildyne Division Introduces the Parker
Compact EHA (Electro-Hydraulic Actuator).
The Parker Compact EHA brings and strokes up to 203 mm (8”), the facilitates manual release and low
power density to the forefront, Parker Compact EHA produces noise signature options for indoor
allowing for control of heavy forces up to 22kN (5,000 lbs) and operation.
loads while requiring only a small speeds up to 130 mm/sec (5.1”/ Applications for the Parker
footprint for mounting. The sec). A fully flushed, filled and Compact EHA are numerous,
EHA integrates all the traditional tested Compact EHA will enable including hatch operators, door
components – a DC-voltage driven customers to quickly install the openers, utility vehicle tilt beds,
electric motor, reversing gear or system in their applications and jack plates, tilt/trims, mower
gerotor pump, relief and check get system machinery running in deck lifts, hospital stretchers,
valves and reservoir – with a significantly less time than before. ATV attachments, etc. Additional
double-acting hydraulic cylinder The IP67 rated EHA is suitable capabilities available from Parker
in a cast aluminum, mono- for punishing environments, Partner Divisions further enhance
block housing. This significantly including those where salt, dust the flexibility and functionality
reduces the potential leak points, or corrosive fertilizers may be the to deliver turn key systems.
simplifies vendor management ambient conditions. Decoupling Almost anywhere a stroke up
and delivers a significant the hydraulic pump from an to 203 mm (8”) is required for
reduction in components needed engine-driven system reduces linear movement, EHA is a prime
for hydraulically controlled the parasitic drag on the engine candidate.
movement. providing for more efficient
With three bore sizes available operation. The unit also easily

Standard Product Ordering Code

EHA A 400 1 B N G BAA 1 A 04 04 B ACA N

BORE OPTIONS
A 25.4 mm (1.00") N None
B 31.8 mm (1.25")
C 36.5 mm (1.44")
ROD CONFIG.
STROKE ACA 14.2 mm Ø (.561") w/6.4 mm (.250") hole
400 102 mm (4.00") BCC 15.9 mm Ø (.625") w/9.5 mm (.375") hole
600 152 mm (6.00") CCE 19.1 mm Ø (.750") w/12.7 mm (.500") hole
800 203 mm (8.00")
MAX FORCE RETRACT
ORIENTATION
Can be 0 – 18,334Nf (0 – 4,120 lbf)
1 VERTICAL - Rod Up
List as 100’s of lbs.
2 HORIZONTAL (12 o'clock)
For example:
Motor Above Cylinder
1780 N = 400 lbs, Code as 04
3 HORIZONTAL (6 o'clock)
12015 N = 2,700 lbs, Code as 27 NOTE:
Motor Below Cylinder LBS = NEWTONS/4.45
14240 N = 3,200 lbs, Code as 32
4 HORIZONTAL (3 o'clock)
Motor to Side of Cylinder
MAX FORCE EXTEND
5 HORIZONTAL (9 o'clock)
Can be 0 – 22,250Nf (0 – 5,000 lbf)
Motor to Side of Cylinder
List as 100’s of lbs
NOTE: CIRCUIT For example:
See page 4 for clarification of B LB 1780 N = 400 lbs, Code as 04
horizontal codes 2-5 12015 N = 2,700 lbs, Code as 27
14240 N = 3,200 lbs, Code as 32
MAN. RELEASE
MOTOR
N None
A 12 VDC MOTOR, 245 WATTS
BASE END CONFIG. B 12 VDC MOTOR, 560 WATTS
C 24 VDC MOTOR, 245 WATTS
BAA Male Pivot 6.4 mm Ø (.250") hole used with Rod ACA
D 24 VDC MOTOR, 560 WATTS
BCA Male Pivot 9.5 mm Ø (.375") hole used with Rod BCC
BEA Male Pivot 12.7 mm Ø (.500") hole used with Rod CCE
PUMP
NOTE:
1 .100 GEAR
Prototypes will have a 12.7 mm Ø (.500") hole
2 .190 GEAR
3 .250 GEAR
4 .327 GEAR

Contact Parker Oildyne for configurations other than those shown here.
EHA Performance Data (@12 +/_ .1 vdc)
MOTOR A: 245 W; 25.4 MM (1.00") BORE MOTOR B: 560 W; 25.4 MM (1.00") BORE
100 50 140 140
(3.9) (5.5)
90 .3
(3.5) 27 120 .32
7R 120

PS
RA 40 (4.7)

S
80 AT

AM
MP
TE E
(3.1) PS PS
100 100

50
7A
.25
70 AM .25 AM S

.2

CURRENT - AMPS

CURRENT - AMPS
0R 0R MP

.32
(2.8) AT 90 (3.9) ATE 27 A
RATE MM/SEC

RATE MM/SEC
E
60 .1 30 80
.3
.2 50
S 80
(2.4) PS .190 MP
(IN/SEC)

.190

(IN/SEC)
RATE AM (3.1) RATE 0A
50 .10
0 .19 S
MP
(2.0)
40 20 60 .10
0A 60
(1.6) (2.4)
30
(1.2) .100 RATE 40 .100 RATE 40
(1.6)
20 10
(0.8) 20 20
10 (0.8)
(0.4)
0 0 0 0

(400)

(800)

(1200)

(1600)

(2000)

(2400)
10676
0

1779

3559

5338

7117

8896

10676
(400)

(800)

(1200)

(1600)

(2000)

(2400)

1779

3559

5338

8896
0

7117
FORCE NEWTONS (LB) FORCE NEWTONS (LB)

MOTOR A: 245 W; 31.8 MM (1.25") BORE MOTOR B: 560 W; 31.8 MM (1.25") BORE
60 60 90 135
(3.5)
(2.4)
.3
27
80 .32 120
50 RA PS 50 (3.1) 7R
(2.0) TE AM 70 AT
E
AM
P S
105
PS

0 S (2.8)
.25 25 MP .250 7
AM

2
40 40 60 3 S
90
CURRENT - AMPS

CURRENT - AMPS
0R .
AT 0A RAT
E
. MP
.19
27

0A
RATE MM/SEC

RATE MM/SEC

E (2.4)
(1.6) .25
.3

.190
RATE 50 .190 RAT MP
S 75
(IN/SEC)

(IN/SEC)

S
30 0A
MP 30 (2.0) E
.19
0A
(1.2) .10 40
(1.6) .100
AM P S
60
20 20 30 45
(0.8) .100 RATE
(1.2)
.100 RATE
20 30
10 10 (0.8)
(0.4) 10 15
(0.4)
0 0 0 0
10676

13345

16014
2669

5338

8007
0

10676

13345

16014
2669

5338

8007
(600)

(1200)

(1800)

(2400)

(3000)

(3600)

(600)

(1200)

(1800)

(2400)

(3000)

(3600)
FORCE NEWTONS (LB) FORCE NEWTONS (LB)

MOTOR A: 245 W; 36.5 MM (1.44") BORE MOTOR B: 560 W; 36.5 MM (1.44") BORE
50 50 70 140
(2.0) (2.8)
60 120
PS
S
MP

.3 .32
AM

PS (2.4) 7R
40 27
40
7A

AM AT
50

RA E S
90 50 100
.32

(1.6) TE
.2

.1 .250 MP
7A
CURRENT - AMPS

CURRENT - AMPS

.25 (2.0) RAT PS

E .32 AM
RATE MM/SEC

RATE MM/SEC

0R
30 ATE
MP
S 30 40 .190 R
.25
0
MP
S 80
(1.2) 0A 0A
(IN/SEC)

(IN/SEC)

.190
RATE .10 (1.6) ATE
.19
30 AMP
S
60
20 20 (1.2) .100
(0.8)
.100 RATE
20 .100 RATE
40
(0.8)
10 10
(0.4) 10 20
(0.4)
0 0 0 0
0

21351
10676

14234

17793

21351
3559
0

7117

3559

7117

10676

14234

17793
(800)

(1600)

(2400)

(3200)

(4000)

(4800)

(800)

(1600)

(2400)

(3200)

(4000)

(4800)

FORCE NEWTONS (LB) FORCE NEWTONS (LB)

Current draw at 24 vdc is about 1/2 of amps shown.

Note: Performance data is based on rod extend, not retract, and is for reference only.
EHA Circuits
Additional Information
Basic 8” stroke EHA (less motor) = 3.2 kg (7.1 lb)
Motors A, C = 1.4 kg (3.0 lb)
Back Pressure Valve Motors B, D = 1.9 kg (4.1 lb)
EXTEND RETRACT Motor leads (all) = 1524 mm (60”)
RV RV
Motor leads A, C = 14 ga
Motor leads B, D = 12 ga
Lead ends are ring terminals: 6.6 mm (.26”) I.D.
Standard fluid: Automatic Transmission Fluid (ATF)
Testing:
Salt Spray Test for 96 hours per ASTM B117
Sealed to IP67
MIL-STD-810F – Minimum Integrity Test (Vibration)
EHA - LB CIRCUIT

Orientation Callouts for Horizontal Mounting (looking at EHA from Rod End)
Horizontal - Code 2 Horizontal - Code 3 Horizontal - Code 4 Horizontal - Code 5
Motor Above Cylinder Motor Below Cylinder Motor to Side of Cylinder Motor to Side of Cylinder
(12 o'clock) (6 o'clock) (3 o'clock) (9 o'clock)

EHA Dimensions
19,1
[ .75 ] THIRD ANGLE
PROJECTION

16,2 STROKE + 102.4 11,7

[ .64 ] [STROKE + 4.03] [ .46 ]

ØA ROD Ø

ØA
150,2
[ 5.92 ] 12,7
[ .50 ] Motor Codes A & C

Motor Codes B & D

219,2 88,5
[ 8.63 ] [ 3.48 ]

© 2007 Parker Hannifin Corporation HY22-3101C 3/09

Parker Hannifin Corporation

Oildyne Division
5520 Highway 169 North
Minneapolis, MN 55428
phone 763-533-1600
fax 763-535-6483
www.parker.com/oildyne