Scribd
Upload
364 views3 pages

Daihatsu Sirion Model m300 Series Service Manual No9890 Other Electrical Parts

The document provides instructions for checking, removing, and installing the horn system on vehicles with standard and aero bumpers. It describes checking that the horn sounds by turning the steering wheel. For removal, it lists the necessary tools and steps to remove the battery terminal and front bumper cover. It then details the components, torque specifications, and procedures to remove and install the horn assembly and related parts. Reinstallation involves reversing the removal steps and reattaching the battery terminal.

Uploaded by

Floyd Price
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
364 views3 pages

Daihatsu Sirion Model m300 Series Service Manual No9890 Other Electrical Parts

The document provides instructions for checking, removing, and installing the horn system on vehicles with standard and aero bumpers. It describes checking that the horn sounds by turning the steering wheel. For removal, it lists the necessary tools and steps to remove the battery terminal and front bumper cover. It then details the components, torque specifications, and procedures to remove and install the horn assembly and related parts. Reinstallation involves reversing the removal steps and reattaching the battery terminal.

Uploaded by

Floyd Price
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

TO INDEX

J6 OTHER ELECTRICAL PARTS

HORN SYSTEM -------------------------------- J6 - 1


BASIC CHECK AND ADJUSTMENT --- J6 - 1
HORN---------------------------------------------- J6 - 1
REMOVAL AND INSTALLATION
(STANDARD-BUMPER EQUIPPED
VEHICLE) -------------------------------------- J6 - 1
REMOVAL AND INSTALLATION
(AERO-BUMPER EQUIPPED
VEHICLE) -------------------------------------- J6 - 2

J6
ProCarManuals.com
J6–1
1 HORN SYSTEM
1-1 BASIC CHECK AND ADJUSTMENT
1-1-1 CHECK OF HORN OPERATIO
1.Check that the horn sounds when the horn button is pushed, while the steering wheel is being turned.
SPECIFIED VALUE: The horn shall sound.

2.Check whether the volume level and quality of sound stay constant.
SPECIFIED VALUE: The quality of sound shall stay constant.

2 HORN
2-1 REMOVAL AND INSTALLATION (STANDARD-BUMPER EQUIPPED VEHICLE)
2-1-1 ARTICLES TO BE PREPARED
Instrument
Torque wrench

2-1-2 OPERATION BEFORE REMOVAL


1.Remove the battery negative (() terminal.
2.Remove the front bumper cover.
Refer to Page I2-2.
ProCarManuals.com

2-1-3 REMOVAL AND INSTALLATION PROCEDURES


(1) Components

T:19.2&3.4 {195&34} B

T11H7401S16

Unit:N;m{kgf;cm}
(2) Removal and installation procedures
1 a Horn Ay,high-pitch

2-1-4 OPERATION AFTER INSTALLATION


1.Install the front bumper cover.
Refer to Page I2-2.

2.Install the battery negative (() terminal.


J6–2
2-2 REMOVAL AND INSTALLATION(AERO-BUMPER EQUIPPED VEHICLE)
2-2-1 ARTICLES TO BE PREPARED
Instrument
Torque wrench

2-2-2 OPERATION BEFORE REMOVAL


1.Remove the battery negative (() terminal.
2.Remove the front bumper cover.
Refer to Page I2-4.

2-2-3 REMOVAL AND INSTALLATION PROCEDURES


(1) Components

T:19.2&3.4 {195&34}
ProCarManuals.com

B
b

T11H7601S16

Unit:N;m{kgf;cm}
(2) Removal and installation procedures
1 a Horn Ay,high-pitch
2 b Stay,horn

2-2-4 OPERATION AFTER INSTALLATION


1.Install the front bumper cover.
Refer to Page I2-4.

2.Install the battery negative (() terminal.

TO INDEX TO NEXT SECTION

You might also like