Scribd
Upload
43 views

Option 82

This document provides instructions for enabling and configuring Option 82 on an optical communications network device. It describes selecting the network element, enabling Option 82 and Option 18 switches and setting the access node identifier. It then explains how to set a custom circuit ID format with 6 identifiers separated by semicolons, including the OLT IP, CVLAN, ONU MAC, slot number, PON number and ONU number. The configuration is saved using the "Write Device" button.

Uploaded by

RomeritoRells
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views

Option 82

This document provides instructions for enabling and configuring Option 82 on an optical communications network device. It describes selecting the network element, enabling Option 82 and Option 18 switches and setting the access node identifier. It then explains how to set a custom circuit ID format with 6 identifiers separated by semicolons, including the OLT IP, CVLAN, ONU MAC, slot number, PON number and ONU number. The configuration is saved using the "Write Device" button.

Uploaded by

RomeritoRells
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

An Expert in Optical Communications

OPTION 82

Configuration Procedure

Version: A
Date: Apr 2022

Jefferson Mendes Pereira

FiberHome Telecommunication Technologies Co., Ltda


Version

Version Description

A Initial version

Thank you for choosing our products.

We appreciate your business. Your satisfaction is our goal. We will provide you with
comprehensive technical support and after-sales service. Please contact your local sales
representative, service representative or distributor for any help needed at the contact
information shown below.

Fiberhome Telecommunication Technologies Co., Ltd.


Address: No. 67, Guanggu Chuangye Jie, Wuhan, Hubei, China
Zip code: 430073
Tel: +6 03 7960 0860/0884 (for Malaysia)
+91 98 9985 5448 (for South Asia)
+593 4 501 4529 (for South America)
Fax: +86 27 8717 8521
Website: http://www.fiberhomegroup.com

1
Legal Notice

are trademarks of FiberHome Telecommunication Technologies Co., Ltd. (Hereinafter


referred to as FiberHome)
All brand names and product names used in this document are used for identification
purposes only and are trademarks or registered trademarks of their respective holders.

All rights reserved

No part of this document (including the electronic version) may be reproduced or


transmitted in any form or by any means without prior written permission from
FiberHome.
Information in this document is subject to change without notice.

2
Contents

How to Enable .................................................................................................................................................. 4


How to Configure ...............................................................................................................................................5

3
HOW TO ENABLE

Select the NE and open the look for “Line Identifier Management”

Look for “Line Identifier Management”

Set the “Option82 Switch” and “Option18 Switch” as Enable;


Set on “Access Node Identifier” the NE name.

After changes the configuration, save the changed clicking on “Create on Device”

4
HOW TO CONFIGURE

Select the NE and open the look for “Line Identifier Management”

Look for “Circuit ID Format”

Select the “Custom Format”, create 6 lines and choose the identifier following the order and
set as Separator a semicolon:
1. OLT Management IP; 4. All Slot NO.;
2. CVLAN; 5. PON NO.;
3. ONU Identifier (MAC); 6. ONU NO.;

After create the Line Identifier Variable, save the configuration using the “Write Device”
button.

You might also like