UNIVERSIDAD TECNOLÓGICA EL RETOÑO

Sistema de Gestión de Calidad

EVALUACIÓN

DEPARTMENT EVALUATION:
SUBJECT: Mechanical Systems II TEACHER: Ing. Ana Cecilia López Delgado TERM:
ID: GROUP: MT9 DATE:
STUDENT’S NAME: FINAL GRADE: EVALUATION CRITERIA:
Exam (60%)
Skills (30%)
Attitude (10%)
COORDINATOR’S SIGNATURE STUDENT’S SIGNATURE AFTER FEEDBACK TOTAL

Please follow ID, and activity name, for the structure of your PDF file (e.g., 1111, 2222, Activity_2,
Bearings_designation_and_selection.pdf). This activity is pair work.

General checklist:
Characteristics % yes no Observations
Organization
Cover page 5%
General description of the activity to performed
Methodology
Bearings selection 80% Each problem solved
according to the formulas
and tables. (20% each)
Bearings designation 20% Describe the meaning
according to the prefix,
basic number and suffix
structure of the bearing of
each problem. (5% each)
Delivered on the requested date 5%
Documentation
PDF file (-1% not PDF file)
Front page with logos, subject, teacher, topic, student, email, (-1% any missing
place and date. information)
Bearings designation (-5% per missing bearing)
Bearings selection (-10% per wrong result, -
10% per wrong procedure )
Delivery (-10% per day of delay)

Notes: You have to demonstrate your knowledge and performance in this report, which will be taken
for the evaluation of the 20% of the final grade.

Código: FO-PLA-01/002
1 de 2 Revisión: 1
Emisión: Noviembre 2017
 UNIVERSIDAD TECNOLÓGICA EL RETOÑO
Sistema de Gestión de Calidad

EVALUACIÓN

Bearings designation
Describe the characteristics of the bearings of each problem depending on its name. (5% each)

Bearings selection
Determine the variable requested on each problem according to the formulas and tables review in
class. (20% each)

1. Select a one row deep groove ball bearing with an inner diameter of 50mm and an outer
diameter smaller than 100mm that accomplishes the following conditions.

Radia load:
Speed:
Basic life ratio:

2. Select a bearing for a speed reducer of series 231 that works properly under the following
conditions:

Radial load:
Axial Load:
Speed:
Size limitation
Axis diameter: 300mm
Housing inside diameter: less than 500mm

3. Select a bearing for a speed reducer of series 241 that works properly under the same
conditions as the problem 2.

4. A single row deep groove ball bearing is subjected to a radial force of 8,000N and thrust force
of 3,000N. The shaft is rotating at 1,200rpm. The expected rating life is 20,000 hours. The
minimum acceptable diameter of shaft is 75mm. Select a suitable ball bearing for this
application.

Código: FO-PLA-01/002
2 de 2 Revisión: 1
Emisión: Noviembre 2017