HA400
HA400
MicroAMP HA400
LINE OUT
(4) (5)
HA400 connectors and control elements
(1) Connect the power supply unit to your HA400 using the 12 V connector.
Connecting the power supply unit to the mains automatically switches the HA400 on.
To disconnect the unit from the mains, pull out the main cord plug.
◊ When installing the product, ensure that the plug is easily accessible. EURORACK UB2222FX-PRO
If mounting in a rack, ensure that the mains can be easily disconnected by a
plug or by an all-pole disconnect switch on or near the rack. Example: HA400 wiring
(2) Connect up to 4 headphones to these ¼" TRS connectors.
(3) The signal source has to be connected to this ¼" TRS connector (INPUT). Warranty
◊ In case the volume level of the signal source is set too high, the HA400 may For the applicable warranty terms and conditions and additional information regarding
produce distortion! MUSIC Group’s Limited Warranty, please see complete details online at
(4) This ON LED is illuminated as soon as the unit is connected to the power. music-group.com/warranty.
(5) Using the LEVEL controls you can set the volume of each headphone output.
◊ High volume levels can damage your hearing or your headphones.
Please turn down all volume controls to zero (all the way to the left)
before you power up the amp. Always make sure you use appropriate
volume levels.
SERIAL NUMBER. The serial number of the HA400 is located at the bottom.
MICROAMP HA400
Specifications Important Safety
Instructions