Scribd
Upload
303 views

Wind Loading With Cp3

This document provides calculations for wind loads on a building as part of a structural calculation project. It includes wind speed data from local tables, dimensions of the building, wind load parameters, and calculations of wind loads from different angles based on pressure coefficients. Wind loads are calculated for the roof and walls of the building at 0 and 90 degree wind angles.

Uploaded by

Suhail Ahamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
303 views

Wind Loading With Cp3

This document provides calculations for wind loads on a building as part of a structural calculation project. It includes wind speed data from local tables, dimensions of the building, wind load parameters, and calculations of wind loads from different angles based on pressure coefficients. Wind loads are calculated for the roof and walls of the building at 0 and 90 degree wind angles.

Uploaded by

Suhail Ahamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

STRUCTURAL CALCULATION

Project Name : City of Arabia - Wadi Walk Project Ref. :


Design By : roy Checked By : glo Page No. :
Date : 2/24/2023 Date : 2/24/2023 Revision # :

Wind Load Calculations : CP 3: Ch. V : Part 2 : 1972

A. Wind speed Table 3 : Ground roughness, building size


Basic wind speed, V (km/hr) 162.00 and height above ground, factor S2
Basic wind speed, V (m/s) 45.00 h S2
5.0 0.740
B. Building Dimensions 8.0 0.824 » Ridge Height
Length, L (m) 37.00 10.0 0.880
Width, W (m) 25.90 Table 7. Cpe for walls of buildings :
Eave Height, H (m) 7.00 a A B C D local
Height of Study, h (m) 8.00 0 0.70 -0.20 -0.50 -0.50 -0.80
Roof slope, (x/10) 0.10 90 -0.50 -0.50 0.70 -0.20 -0.80
Eave height/width ratio, H/W 0.27 Table 8. Cpe for pitch roofs of buildings :
Length/width ratio, L/W 1.43 Wind angle α = 0° :
Ø EF GH
C. Wind Load Parameters 0.00 -0.80 -0.40
Ground roughness category & building class 2B 4.00 -0.880 -0.400
Topography factor, S1 1.00 5.00 -0.90 -0.40
Ground roughness factor, S2 0.82 Wind angle α = 90° :
Statistical factor, S3 1.00 Ø EG FH
Design wind speed, Vs = V S1 S2 S3 (m/s) 37.08 0.00 -0.80 -0.40
Dynamic wind pressure, q = 0.613 Vs2 (kN/m2) 0.84 4.00 -0.800 -0.400
5.00 -0.80 -0.40

D. Wind Load, w (kN/m2) wind angle, α = 0˚ -0.910 -0.506


Cpi 0.20 A EF GH B C D local
Cpe 0.70 -0.88 -0.40 -0.20 -0.50 -0.50 -0.80
Cpe-Cpi 0.50 -1.08 -0.60 -0.40 -0.70 -0.70 -0.80 0.421 -0.337
w=q(Cpe-Cpi) 0.421 -0.910 -0.506 -0.337 -0.590 -0.590 -0.674

Wind Load, w (kN/m2) wind angle, α = 0˚ -0.489 -0.084


Cpi -0.30 A EF GH B C D local
Cpe 0.70 -0.88 -0.40 -0.20 -0.50 -0.50 -0.80
Cpe-Cpi 1.00 -0.58 -0.10 0.10 -0.20 -0.20 -0.80 0.843 0.084
w=q(Cpe-Cpi) 0.843 -0.489 -0.084 0.084 -0.169 -0.169 -0.674

Wind Load, w (kN/m2) wind angle, α = 90˚ -0.843 -0.843


Cpi 0.20 A E G B C D local
Cpe -0.50 -0.80 -0.80 -0.50 0.70 -0.20 -0.80
Cpe-Cpi -0.70 -1.00 -1.00 -0.70 0.50 -0.40 -0.80 -0.590 -0.590
w=q(Cpe-Cpi) -0.590 -0.843 -0.843 -0.590 0.421 -0.337 -0.674

Wind Load, w (kN/m2) wind angle, α = 90˚ -0.421 -0.421


Cpi -0.30 A E G B C D local
Cpe -0.50 -0.80 -0.80 -0.50 0.70 -0.20 -0.80
Cpe-Cpi -0.20 -0.50 -0.50 -0.20 1.00 0.10 -0.80 -0.169 -0.169
w=q(Cpe-Cpi) -0.169 -0.421 -0.421 -0.169 0.843 0.084 -0.674
Table 3
H Ground Roughness Category (Class)
m 1A 1B 1C 2A 2B 2C 3A 3B 3C 4A 4B 4C
1 3 0.83 0.78 0.73 0.72 0.67 0.63 0.64 0.60 0.55 0.56 0.52 0.47
2 5 0.88 0.83 0.78 0.79 0.74 0.70 0.70 0.65 0.60 0.60 0.55 0.50
3 10 1.00 0.95 0.90 0.93 0.88 0.83 0.78 0.74 0.69 0.67 0.62 0.58
4 15 1.03 0.99 0.94 1.00 0.95 0.91 0.88 0.83 0.78 0.74 0.69 0.64
5 20 1.06 1.01 0.96 1.03 0.98 0.94 0.95 0.90 0.85 0.79 0.75 0.70
6 30 1.09 1.05 1.00 1.07 1.03 0.98 1.01 0.97 0.92 0.90 0.85 0.79
7 40 1.12 1.08 1.03 1.10 1.06 1.01 1.05 1.01 0.96 0.97 0.93 0.89
8 50 1.14 1.10 1.06 1.12 1.08 1.04 1.08 1.04 1.00 1.02 0.98 0.94
9 60 1.15 1.12 1.08 1.14 1.10 1.06 1.10 1.06 1.02 1.05 1.02 0.98
10 80 1.18 1.15 1.11 1.17 1.13 1.09 1.13 1.10 1.06 1.10 1.07 1.03
11 100 1.20 1.17 1.13 1.19 1.16 1.12 1.16 1.12 1.09 1.13 1.10 1.07
12 120 1.22 1.19 1.15 1.21 1.18 1.14 1.18 1.15 1.11 1.15 1.13 1.10
13 140 1.24 1.20 1.17 1.22 1.19 1.16 1.20 1.17 1.13 1.17 1.15 1.12
14 160 1.25 1.22 1.19 1.24 1.21 1.18 1.21 1.18 1.15 1.19 1.17 1.14
15 180 1.26 1.23 1.20 1.25 1.22 1.19 1.23 1.20 1.17 1.20 1.19 1.16
16 200 1.27 1.24 1.21 1.26 1.24 1.21 1.24 1.21 1.18 1.22 1.21 1.18
TABLE 7
h/w l/w a A B C D local
1 0.00 0.70 -0.20 -0.50 -0.50 -0.80
1.50
90.00 -0.50 -0.50 0.70 -0.20 -0.80
0.50
0.00 0.70 -0.25 -0.60 -0.60 -1.00
4.00
90.00 -0.50 -0.50 0.70 -0.10 -1.00
5 0.00 0.70 -0.25 -0.60 -0.60 -1.10
1.50
90.00 -0.60 -0.60 0.70 -0.25 -1.10
1.50
0.00 0.70 -0.30 -0.70 -0.70 -1.10
4.00
90.00 -0.50 -0.50 0.70 -0.10 -1.10
9 0.00 0.80 -0.25 -0.80 -0.80 -1.20
1.50
90.00 -0.80 -0.80 0.80 -0.25 -1.20
6.00
0.00 0.70 -0.40 -0.70 -0.70 -1.20
4.00
90.00 -0.50 -0.50 0.80 -0.10 -1.20
TABLE 8 TABLE 9
h/w a EF GH EG FH
1 0 -0.80 -0.40 -0.80 -0.40
5 -0.90 -0.40 -0.80 -0.40
10 -1.20 -0.40 -0.80 -0.60
0 20 -0.40 -0.40 -0.70 -0.60
30 0.00 -0.40 -0.70 -0.60
45 0.30 -0.50 -0.70 -0.60
60 0.70 -0.60 -0.70 -0.60
8 0 -0.80 -0.60 -1.00 -0.60
5 -0.90 -0.60 -0.90 -0.60
10 -1.10 -0.60 -0.80 -0.60
0.5 20 0.70 -0.50 -0.80 -0.60
30 -0.20 -0.50 -0.80 -0.80
45 0.20 -0.50 -0.80 -0.80
60 0.60 -0.50 -0.80 -0.80
15 0 -0.70 -0.60 -0.90 -0.70
5 -0.70 -0.60 -0.80 -0.80
10 -0.70 -0.60 -0.80 -0.80
20 -0.80 -0.60 -0.80 -0.80
1.5
30 -1.00 -0.50 -0.80 -0.70
40 -0.20 -0.50 -0.80 -0.70
50 0.20 -0.50 -0.80 -0.70
60 0.5 -0.5 -0.80 -0.70
TABLE - 11.5 (a = 0)
y/d h/d 1 2 3 4 5 6
1 0 0.3 -0.3 -0.6 -0.7 -0.6 -0.2 TABLE - 11.6 (a = 90)
2 0.125 -0.5 -0.5 -0.7 -0.7 -0.5 -0.2 A -0.8
3 0.25 -0.9 -0.6 -0.8 -0.8 -0.4 -0.2 B -0.6
1/5
4 0.5 -1.2 -0.7 -0.9 -0.8 -0.3 -0.2 C -0.3
5 1 -1.4 -0.8 -0.9 -0.9 -0.4 -0.4 D -0.2
6 5 -1.8 -1 -1.1 -1.2 -0.8 -0.8
1 0.125 -1 -0.4 -0.4 -0.4 -0.4 -0.3
2 0.25 -1.2 -0.5 -0.4 -0.4 -0.4 -0.3
1/10
3 0.5 -1.5 -1 -0.7 -0.5 -0.4 -0.3
4 1 -1.6 -1 -0.8 -0.6 -0.4 -0.3
TABLE - 9
0 45 90 135 180 LOCAL Cpe
b
H L H L H&L H&L H L H L H1 H2 L1 L2 He Le
1 5.00 -1.00 -0.50 -1.00 -0.90 -1.00 -0.50 -0.90 -1.00 -0.50 -1.00 -2.00 -1.50 -2.00 -1.50 -2.00 -2.00
2 10.00 -1.00 -0.50 -1.00 -0.80 -1.00 -0.50 -0.80 -1.00 -0.40 -1.00 -2.00 -1.50 -2.00 -1.50 -2.00 -2.00
3 15.00 -0.90 -0.50 -1.00 -0.70 -1.00 -0.50 -0.60 -1.00 -0.30 -1.00 -1.80 -0.90 -1.80 -1.40 -2.00 -2.00
4 20.00 -0.80 -0.50 -1.00 -0.60 -0.90 -0.50 -0.50 -1.00 -0.20 -1.00 -1.80 -0.80 -1.80 -1.40 -2.00 -2.00
5 25.00 -0.70 -0.50 -1.00 -0.60 -0.80 -0.50 -0.30 -0.90 -0.10 -0.90 -1.80 -0.70 -0.90 -0.90 -2.00 -2.00
6 30.00 -0.50 -0.50 -1.00 -0.60 -0.80 -0.50 -0.10 -0.60 0.00 -0.60 -1.80 -0.50 -0.50 -0.50 -2.00 -2.00
STRUCTURAL CALCULATION

Project Name : Project Ref. :


Design By : Checked By : Page No. :
Date : Date : Revision # :

You might also like