Scribd
Upload
108 views2 pages

Asme Uv

This document is a renewal of CARRARO s.r.l.'s Certificate of Authorization from the American Society of Mechanical Engineers (ASME) to apply the ASME Certification Mark to items built according to the ASME Boiler and Pressure Vessel Code. The certificate authorizes CARRARO s.r.l. to manufacture pressure vessel pressure relief valves at its location in Segrate, Italy and expires on March 4, 2021. A renewal notice will be sent eight months before expiration for certain items and six months for others, and it is CARRARO s.r.l.'s responsibility to ensure renewal applications are submitted in time.

Uploaded by

koko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
108 views2 pages

Asme Uv

This document is a renewal of CARRARO s.r.l.'s Certificate of Authorization from the American Society of Mechanical Engineers (ASME) to apply the ASME Certification Mark to items built according to the ASME Boiler and Pressure Vessel Code. The certificate authorizes CARRARO s.r.l. to manufacture pressure vessel pressure relief valves at its location in Segrate, Italy and expires on March 4, 2021. A renewal notice will be sent eight months before expiration for certain items and six months for others, and it is CARRARO s.r.l.'s responsibility to ensure renewal applications are submitted in time.

Uploaded by

koko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Two Park Avenue tel 1.212.591.

8500

New York, NY fax 1.212.591.85O1


SETfING fHE SfANDARD
r00r6-5990 u.s.A www.aSme.org

December 13,2017

Marco Digennaro, Technical Manager


CARRARO s.r.l.
Via Enrico Fermi22
Segrate (Ml) 20090
Italy

Subject: Renewal of ASME Certificate of Authorization 'UV' H7 ,150

Dear Marco Digennaro:

Enclosed is your Certificate of Authorization to apply the ASME Certification Mark to items, which you build in
accordance witn tne ASME Boiler and Pressure Vessel Code. lf this is a new issuance, the Certification Stamp is also
enclosed. The purpose of the Certification Stamp is solely for application to items, which have been built in
accordance with the Code, and the use of the certification mark in advertising is restricted.
Certificate and H
Since a renewal notice will be mailed eight months prior to the expiration date shown on the enclosed
the individual and address shown
(Cast lron) and UM yearly renewals willie mailed six months prior to that date, to
of any changes. aly case, it is your responsibility that we receive renewal
above, it is importani thai we be informed !n
months inine caie of H (Cast lron) and UM] prior to the expiration of the
applications at least six months [four
enclosed Certificate.

tf you make reference to the ASME Symbol in your adye(si1g,1t.is required !hat191 lotlow the "STATEMENT OF
pOLtCy ON THE USE OF THE CERTtFtCATtbN MARK AND CODE AUTHORIZATION lN ADVERTISING" which
in the preliminary material in each Section of the ASME Boiler and Pressure Vessel
Code'
"pp"rr.
Very truly yours,

Janet Hill
Program Administrator
ASME Conformity Assessment Department
(212) 591-8581
[email protected]

JH/mra-103259

cc: National Boardffhomas P. Beirne

Encl.
CERTIFICATE OF
AUTHORIZATION
UV

Lh:. r.q"o company is authorized by the American society of Mechanicar Engineers


(ASME) ror the scope of activity shown below in accordance wnn
tre affriciole rules of
the ASME Boiler and Pressure Vessel code. The use of the certification mark and the
authori$ granted by this Certificate of Authorization are subject to tne proviiions ot tne
agreement set forth in the application. Any construction stamped with this certification
mark
shall have been built strictly in accordance with the provisions of the ASME Boiler and
o
L- Pressure Vessel Code.
o
o
e
'6, COMPANY:
GARRARO s.r.l.
Via Enrico Femi22
lJJ Segrate (Ml) 20090
(E Italy
.9
E
(E SCOPE:

o
o
Manufacture of pressure vessel pressure relief valves at the above location only

=
o
+t
.9
o
o
o
E
(E
o AUTHORIZED: December 12,2017
L EXPIRES: March 4,2021
(I)
CERTIFICATE NUMBER:
E 47,150

()
F
Board Chair, Conformity Assessment

Managing Director, Conformity Assessment

You might also like