#Assembly Instructions Ww #1Door / 2 Doors_LEO # 1 Full Length Hanging Rod # Full Length Drawer unit(\ Safety and Care Advice +# Check you have all the # Do not stend or put weight on # To reduce the likelinood of components and tools listed on the product, this could cause Q) damaging your product please pages 2 ond 3. omage ensure that your power drill is set # Remove oll fitings from the _-# Assemble the item as cose to on o low torque setting plastic bags and separate them its final postion (in the seme room] # Worning: Only use @ manual into their groups. ee pose ie screwdriver to attach the hinges +# Keep cildren and animals # Assemble on a soft level surface caviy from the work area, small to avoid damaging theunit or # Dispose of all packaging parts could choke if swallowed. your floor carefully and responsibly # Moke sure you have enough +# Ports of the assembly will be easier spoce to layout the parts before with 2 people starting Care and maintenance +# Only clean using o damp cloth and # From time to time check tht there # from time to time check that there are mild detergent, do no use bleech or are na loose screws on this unit 10 loose screws on this unit abrasive cleaners DO NOT RETURN THE PRODUCT TO STORE If a part is missing or damaged, email our customer service We are gladly ship your replacement part FREE of charge NEED PART OR ASSISTANCE? Email us at [email protected] For prompt, reliable service; pleae have your assembly Manual readyPART LIST & LOCATION < Parts prt a tet paca [A tree are ier bo or pctaget that cided components onments eped nantes tonne @ Top Panel © Right Side Panel [® van Sie Par @© poor Shutters Phos 4) Main Unit:Preperation of Wardrobe Sides c: Fix CONNECTOR SCREW with the help of Screw Driver B: insert NYLON BUSHES with help of wooden hammer A: insert DOWEL PIN with help of wooden hammer D: insert METAL INSERT with help of wooden hammer E: Fix Levelers in METAL INSERT with help of Key / by HandWARDROBE CARCAS INSTALLATION Assembly Instruction Step 1 “Place and fix Panel 1, 5, 7, 15 onto Panel 3by inserting the (Lett) dowels onto the non-thru holes at Panel 3 * Minifix provision also there. * Fix Panel No.6 at Panel No. 15 by help of L Patti with screws ‘When inserting the PVC Doweld to non-thru holes, don't push to hard, Otherwise, CAUTIONS | the side panels (2 & 3) may be damaged.DRAWER INSTALLATION METHOD Assembly Of Drawers | | “Insert the mini fix (B) APY 1 “Insert Panel 13 into the drawer and align properly. J (As shown) “Insert the mini fix (B)(nuts) with the cross arrow mark facing upward and aim to [Orne panel 8,11 and 9's top oe thru holes. (As shown)DRAWER INSTALLATION METHOD 4# Place 9 No (Left & Right) Panel at: * “Flip the drawer over. “Tighten 2 screw (E) from inner side of panel 8 Screw MeasDoor Panel Assembly Instruction Step 1 ‘a: To move doors up or down: loosen screws shown and move doors to suit ‘Once doors are aligned, b: Tighten screw shown to lock hinges in position. b: To move doors in or out: loosen screw shown and move doors to suit. C: To move doors left Re-tighten screws. or right: loosen screw shown and move doors to suit. Re-tighten screws. [D rinses Scew Wa sxtémn] Escrow ma stm [@ Hance apes ‘Fes vee |} me Be || me |) mg Reference Images related to a, b, c positions at next pageReference Images related to a, 5 c positions @: To move doors up or down: loosen screws shown and move doors to suit. Once doors are aligned, re-tighten. b: Tighten screw shown to lock hinges in position. b: To move doors in or out: loosen screw shown and move doors to suit. Re-tighten screws. C: To move doors left or right: loosen screw shown and move doors to suit. Re-tighten screws.