Product data sheet BMXEHC0200

Characteristics high speed counter module M340 - 2 channels

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Main
Range of product Modicon M340 automation platform
Product or component type Counter module
Number of channels 2
Counting frequency <= 60000 Hz
Number of inputs 6
Input compatibility Incremental encoder with push-pull outputs 10...30 V totem pole
2-wire/3-wire proximity sensor 19.2...30 V
Input voltage 24 V DC type 3
Number of outputs 2
Output voltage 24 V DC

Complementary
Counter functions 32-bit counter counting
Count events
Down counting
Frequency meter
Loop (modulo) counting
Measure time periods
Ratio count
Width modulation
Cycle time 1 ms
Isolation voltage 1500 V for 60 s
Input type 3 auxiliary input
3 high speed
Input voltage limits 30 V
Input current 2 mA at 11 V
Voltage state 1 guaranteed 11...30 V
Current state 1 guaranteed >= 6 mA
Voltage state 0 guaranteed <5V
Current state 0 guaranteed <= 1.5 mA
Discrete output logic Positive or negative configurable

May 29, 2019

1
Maximum output current 2 A per module
0.5 A per output
Output voltage limits 19.2...30 V
Maximum load current 0.5 A per output
1 A per module
Leakage current <= 0.1 mA at state 0
Voltage drop <= 3 V at state 1
Output overload protection Integrated
Output short-circuit protection 1.5 A integrated
Overlap time 0.2 ms
Electrical connection 1 connector 10 pins for wiring auxiliary input and sensor power supply
1 connector 16 pins for wiring the sensors of counter 0
1 connector 16 pins for wiring the sensors of counter 1
Current consumption 200 mA 3.3 V DC bus
40 mA 24 V DC rack
80 mA 24 V DC sensor
Module format Standard
Product weight 0.112 kg

Environment
Ambient air temperature for operation 0...60 °C
Relative humidity 10...95 % without condensation
IP degree of protection IP20
Directives 2012/19/EU - WEEE directive
2014/30/EU - electromagnetic compatibility
2014/35/EU - low voltage directive
Standards EN 61000-6-2
EN 61000-6-4
EN 61131-2
EN 61010-2-201
Protective treatment TC

Offer Sustainability
Sustainable offer status Green Premium product
RoHS (date code: YYWW) Compliant  - since  0722  -  Schneider Electric declaration of conformity
Schneider Electric declaration of conformity
REACh Reference not containing SVHC above the threshold
Reference not containing SVHC above the threshold
Product environmental profile Available
Product Environmental Profile
Product end of life instructions Available
End of Life Information

Contractual warranty
Warranty period 18 months

2
Product data sheet BMXEHC0200
Dimensions Drawings

Modules Mounted on Racks

Dimensions

(1) With removable terminal block (cage, screw or spring).

(2) With FCN connector.
(3) On AM1 ED rail: 35 mm wide, 15 mm deep. Only possible with BMXXBP0400/0400H/0600/0600H/0800/0800H rack.

Rack references a in mm a in in.

BMXXBP0400 and BMXXBP0400H 242.4 09.54

BMXXBP0600 and BMXXBP0600H 307.6 12.11

BMXXBP0800 and BMXXBP0800H 372.8 14.68

BMXXBP1200 and BMXXBP1200H 503.2 19.81

3
Product data sheet BMXEHC0200
Connections and Schema

Counting Module Wiring

Note
The two 16-pin connectors and the 10-pin connector are sold separately and are available in the BMXXTSHSC20 connection kit.

Assignment of the 16-Pin Connector

Pin number Symbol Description

1, 2, 7, 8 24V_SEN 24 VDC output for sensors supply

5, 6, 13, 14 GND_SEN 24 VDC output for sensors supply

15, 16 FE Functional earth

3 IN_A Input A

4 IN_SYNC Synchronization input

9 IN_B Input B

10 IN_EN Enable input selected

11 IN_REF Homing input

12 IN_CAP Capture input

Sensors Connection Example

1 IN_A input
2 IN_B input
3 IN_SYNC input (synchronization input)
4 IN_EN input (enable input)

4
Encoder Connection Example for Axis Control

1 Encoder (inputs A, B and Z)

2 IN_REF input (homing input)
3 IN_EN input (enable input)
4 IN_CAP input (capture input)

Assignment of the 10-Pin Connector

Pin number Symbol Description

1 24V_IN 24 VDC input for sensors supply

2 GND_IN Return 24 VDC input for sensors supply

5 Q0-1 Q1 output for counting channel 0

6 Q0-0 Q0 output for counting channel 0

7 Q1-1 Q1 output for counting channel 1

8 Q1-0 Q0 output for counting channel 1

9 24V_OUT 24 VDC input for actuators supply

10 GND_OUT Return 24 VDC input for actuators supply

5
Connecting Outputs and Supplies

1 24 VDC supply for sensors

2 Return 24 VDC supply for sensors
3 Actuator for the Q0 output of counting channel 0
4 Actuator for the Q1 output of counting channel 0
5 Actuator for the Q0 output of counting channel 1
6 Actuator for the Q1 output of counting channel 1
The Q0 and Q1 outputs are limited by a maximum current of 0.5 A.

Recommended Circuit for high-Noise Environment Using BMXXSP•••• Electromagnetic Protection Kit