Scribd
Upload
194 views4 pages

Modicon X80 I - Os - BMXDDO1602

This product data sheet provides information on a 16-channel discrete output module with 24V DC positive outputs. The module has 16 outputs that can switch 0.5A each, with a total current of 10A. It has overvoltage, overcurrent and reverse polarity protection. The module operates between 0-60°C and has CE, UL, CSA and other certifications.

Uploaded by

Orhan Denizli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
194 views4 pages

Modicon X80 I - Os - BMXDDO1602

This product data sheet provides information on a 16-channel discrete output module with 24V DC positive outputs. The module has 16 outputs that can switch 0.5A each, with a total current of 10A. It has overvoltage, overcurrent and reverse polarity protection. The module operates between 0-60°C and has CE, UL, CSA and other certifications.

Uploaded by

Orhan Denizli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Product data sheet BMXDDO1602

Characteristics discrete output module X80 - 16 outputs - 24 V


DC positive

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Main
Range of product Modicon X80
Product or component type Discrete output module
Discrete output number 16 conforming to EN/IEC 61131-2
Discrete output logic Positive
Discrete output voltage 24 V 19...30 V DC
Discrete output current 0.5 A
Output compatibility IEC 61131-2 type 3 DC input
Not IEC 61131-2 DC input

Complementary
Current per channel 0.625 A
Current per module <= 10 A
Leakage current <= 0.5 mA at state 0
[Ures] residual voltage 1.2 V at state 1
Insulation resistance > 10 MOhm 500 V DC
Power dissipation in W <= 4 W
Response time on output 1.2 ms
Paralleling of outputs Yes : 2 maximum
Typical current consumption 79 mA at 3.3 V DC
MTBF reliability 392285 H
Protection type External short-circuit protection
Overload protection
Overvoltage protection
Reverse polarity protection
Output overload protection With electronic circuit breaker 1.5 In < Id < 2 In
With current limiter
Output overvoltage protection With transil diode
Output short-circuit protection With 2 A external fuse
Reverse polarity protection Reverse mounted diode
May 28, 2019
1
Voltage detection threshold < 14 V DC preactuator fault
> 18 V DC preactuator at state 0
Tungsten load <= 6 W
Switching frequency 0.5/LI² Hz
Load impedance ohmic > 48 Ohm
Status LED 1 LED green for module operating (RUN)
1 LED per channel green for channel diagnostic
1 LED red for module I/O
1 LED red for module error (ERR)
Product weight 0.12 kg

Environment
Directives 2012/19/EU - WEEE directive
2014/30/EU - electromagnetic compatibility
2014/35/EU - low voltage directive
IP degree of protection IP20
Product certifications CE
CSA
UL
RCM
Merchant Navy
EAC
Standards EN 61000-6-2
EN 61000-6-4
EN 61131-2
EN 61010-2-201
Dielectric strength 1500 V AC at 50/60 Hz 1 minute, output/ground
1500 V AC at 50/60 Hz 1 minute, output/internal logic
Vibration resistance 3 gn
Shock resistance 30 gn
Ambient air temperature for storage -40...85 °C
Ambient air temperature for operation 0...60 °C
Relative humidity 5...95 % without condensation 55 °C
Protective treatment TC
Operating altitude 0...2000 m
2000...5000 m (with)

Offer Sustainability
Sustainable offer status Green Premium product
RoHS (date code: YYWW) Compliant  - since  0722  -  Schneider Electric declaration of conformity
Schneider Electric declaration of conformity
REACh Reference not containing SVHC above the threshold
Reference not containing SVHC above the threshold
Product environmental profile Available
Product Environmental Profile
Product end of life instructions Available
End of Life Information

Contractual warranty
Warranty period 18 months

2
Product data sheet BMXDDO1602
Dimensions Drawings

Modules Mounted on Racks

Dimensions

(1) With removable terminal block (cage, screw or spring).


(2) With FCN connector.
(3) On AM1 ED rail: 35 mm wide, 15 mm deep. Only possible with BMXXBP0400/0400H/0600/0600H/0800/0800H rack.

Rack references a in mm a in in.

BMXXBP0400 and BMXXBP0400H 242.4 09.54

BMXXBP0600 and BMXXBP0600H 307.6 12.11

BMXXBP0800 and BMXXBP0800H 372.8 14.68

BMXXBP1200 and BMXXBP1200H 503.2 19.81

3
Product data sheet BMXDDO1602
Connections and Schema

Connecting the Module

Output Circuit Diagram

Module Connection

power supply
24 VDC
fuse fast blow fuse of 6.3 A
pre-act pre-actuator

You might also like