580 Super M

Loader/Backhoe
ENGINE POWERTRAIN HYDRAULICS
Model .................... Case 4T-390 diesel Transmission... 4-speed synchromesh Pump .................... Gear-type tandem,
Type................ 4-stroke, turbocharged with hydraulically actuated front mounted, direct drive
Cylinders ............................................. 4 clutches and electric to engine crankshaft
Bore/Stroke .................... 4.02” x 4.72” F/R shuttle control, clutch Loader flow @ rated engine rpm
(102 x 120 mm) disconnect buttons on the 28.5 gpm @ 3050 psi
Displacement ................ 239 in3 (3.9 L) transmission shifter and (108 L/min @ 210 bar)
Fuel injection.............................. Direct loader control lever Loader control valve............ Sectional
Fuel.............................................. Diesel Gear ratios Forward Reverse 2 or 3-spool with
Fuel filter..................... In-line strainer 1st...................... 5.491 .............. 4.550 single lever control for
Air intake ........................... Cross-flow 2nd .................... 3.043 .............. 2.522 lift, tilt and auxiliary hydraulics,
Cooling ...................................... Liquid 3rd..................... 1.584 .............. 1.313 positive hold float
Engine speeds* (rpm) 4th ..................... 0.793 .............. 0.657 and return-to-dig
Rated speed, full load .............. 2200 Torque converter Backhoe flow @ rated engine rpm
Low idle............................ 900 - 1100 Ratio ............................................ 2.63 38 gpm @ 3050 psi
High idle, no load ......... 2355 - 2475 Differential lock.................. On-the-go (144 L/min @ 210 bar)
Horsepower push-button activation Backhoe control valve ......... Sectional
Gross.......... 95 (71 kW) @ 2200 rpm Front 4WD axle 6, 7 or 8-spool, open-center
Net ............. 90 (67 kW) @ 2200 rpm Differential ratio .......................... 2.0 parallel circuits with regeneration.
Maximum torque @ 1500 rpm Planetary hub ratio ..................... 6.0 Boom, dipper, and stabilizers with
Gross ..................... 283 lb·ft (384 N·m) Total reduction ratio.................. 12.0 pilot operated check
Net ......................... 279 lb·ft (378 N·m) Rear axle Loader auxiliary hydraulics
Torque rise at rated speed ........... 24% Differential ratio ...................... 2.333 13 to 28.5 gpm
Planetary hub ratio ................. 6.923 (49 to 108 L/min)
NOTE: *Engine speeds with standard Total reduction ratio.............. 16.153 Backhoe auxiliary hydraulics
transmission. Meets federal emission
regulations.
Service brakes... Individually applied, Uni-directional flow, with
hydraulically actuated, foot pedal activation
ENGINE COOLING maintenance-free, self-adjusting,
inboard mounted, wet disc
Low-flow 17 to 28 gpm
(64 to 106 L/min)
Radiator (non air-conditioned)
Core type..................... Square wave Disc area..................... 53 in2 (.03 m2) High-flow 26 to 38 gpm
Core size area ........ 369 in2 (.238 m2) Parking brakes .............. Mechanically (98 to 144 L/min)
Rows of tubes.................................. 5 applied with electric activation Handheld auxiliary hydraulics
Fan w/standard transmission sensors at each brake 8 to 17 gpm
Style ......................... 7 blade suction Travel speeds – mph (km/h) (30 to 64 L/min)
Diameter ................. 19.6” (500 mm) 1st 2nd 3rd 4th Main relief pressure
Ratio ........................................... 1.1:1 Forward 3.6 ....... 6.6 ....... 12.6 ...... 25.1 3050 + 50 - 50 psi @ 14 gpm
Water pump (5.8) (10.5) (20.2) (40.4) (210 + 3 - 3 bar @ 53 L/min)
Style ...................................... Integral Reverse 4.4........ 7.9 ....... 15.2 ...... 30.3 Filtration ............................... 7-micron,
Engine oil (7.1) (12.7) (24.4) (48.8) full flow replaceable
Pump........ Deep sump plate cooler cartridge on return line, condition
NOTE: Travel speeds at 2348 engine rpm with indicator light for filter
with pressurized 19.5L x 24 rear tires. Speeds decrease
under-piston nozzles with 17.5L x 24 rear tires.
Oil cooler.......................... Heavy-duty
Pump operating angle ratings
Side-to-side ..................... Rated 45° TIRES ELECTRICAL
Fore and aft..................... Rated 45° Front Voltage ...... 12 volts, negative ground
Oil filtration................. Replaceable, 2WD – 11L x 16.1, 10-ply rating Alternator................. 65 amp (2.5 kW)
full-flow cartridge 4WD – 12 x 16.5, 8-ply rating Battery ......... 685 cold-cranking amps
Rear Optional batteries..................... (2) 525
2/4WD – 17.5L x 24, 10-ply rating cold-cranking amps
2/4WD – 19.5L x 24, 10-ply rating Power plugs .............. (2) 30 amps ea.

Page 1 of 6
OPERATOR ENVIRON- OPERATING WEIGHTS LOADER
Lightest Configuration Single-lever control for lift and tilt
MENT Unit equipped with 2WD, ROPS Positive hold float
ROPS/FOPS canopy canopy, non-suspension seat, 82” Return-to-dig
Key start (2.08 m) general purpose loader Automatic self-leveling
Hydrostatic steering bucket, 24” (610 mm) Universal In-line, reverse linkage
Non-suspension seat w/180° swivel backhoe bucket, standard dipper, Dual parallel dump cylinders
Hand and foot throttles 17.5L x 24 rear tires, 11L x 16.1 Clutch disconnect button on loader
Loader control lever w/push-button front tires, single battery, standard control and shift levers
activation of differential lock and cast stabilizer pads, no Bucket position indicator
transmission de-clutch operator ................ 14,250 lb (6464 kg) Loader Bucket Sizes
Backhoe foot-swing w/3 lever Heaviest Configuration General Purpose Bucket
control Unit equipped with 4WD, ROPS cab, Width Weight Struck Heaped
(2) Accessory power plugs (30 amp) suspension seat, 82” (2.08 m) 4 IN 1® 82” 686 lb* 0.87 yd3 1.03 yd3
Anti-vandalism covers (canopy only) loader bucket, 24” (610 mm) (2.08 m) (311 kg) (0.67 m3) (0.79 m3)
Cup holder Universal backhoe bucket, 93” 933 lb* 1.07 yd3 1.25 yd3
Coat hook w/tether strap (cab only) Extendahoe® dipperstick, 19.5L x 24 (2.36 m) (423 kg) (0.82 m3) (0.96 m3)
Interior rearview mirror rear tires, Galaxy tires front & rear,
2” (51 mm) retractable seat belt dual batteries, flip stabilizer pads,
4 IN 1® Bucket
Storage compartment w/lid no operator........... 18,031 lb (8179 kg)
82” 1,462 lb 0.85 yd3 1.04 yd3
Left side storage tray
(2.08 m) (663 kg) (0.65 m3) (0.80 m3)
Add-on weights
INSTRUMENTATION Cab (over canopy) ... +454 lb (206 kg) NOTE: *Add 103 lb (47 kg) for bolt-on
Gauges Counterweights........ +440 lb (200 kg) cutting edge.
Engine water temperature +900 lb (408 kg)
Converter oil temperature Extendahoe® ............. +496 lb (225 kg) BACKHOE
Fuel 4WD w/driveshaft guard...... + 283 lb Over-center design
Tachometer/hourmeter (128 kg) Cast, ductile iron boom, and swing
Voltmeter tower w/5 year warranty
Warning lights SERVICE CAPACITIES Open-center hydraulics - Pro Control
Air cleaner restriction Fuel tank ..................... 31.4 gal (119 L) System
Alternator Optional tank ......... 40.0 gal (151 L) 194,200 lb·in (21 940 N·m) swing torque
Engine oil pressure Hydraulic system Case attachment coupler
Hydraulic oil filter bypass Total ......................... 31.5 gal (119 L) Foot-swing w/3 lever control
Parking brake engagement Total w/Extendahoe® .......... 33.0 gal Wing-style stabilizers w/cleated dirt
Rear axle fluid temperature (125 L) pad
sensing system Reservoir w/filter.. 14.5 gal (54.9 L) Backhoe Bucket Sizes
Low fuel Reservoir w/o filter ... 14.0 gal (53 L)
Audible alarms Transmission Universal Buckets
Coolant temperature 2WD Total system .. 19.5 qt (18.5 L) Width Weight Heaped
Engine oil pressure 4WD Total system .. 22.0 qt (20.8 L) 12”................ 290 lb .......... 3.40 ft3
Parking brake engagement 4WD Front axle (305 mm) (132 kg) (0.10 m3)
Shuttle engagement/seat position Differential................... 5.8 qt (5.5 L) 16”................ 346 lb .......... 3.60 ft3
Backup alarm Planetaries (each)...... 0.7 qt (0.66 L) (406 mm) (157 kg) (0.10 m3)
Turn signal indicators Rear axle 18”................ 350 lb .......... 5.30 ft3
Horn - dual switched front & rear Differential............... 15.0 qt (14.2 L) (457 mm) (159 kg) (0.15 m3)
Planetaries (each)........ 1.6 qt (1.5 L) 24”................ 413 lb .......... 7.70 ft3
TURNING DIAMETER Engine oil w/filter .... 11.6 qt (10.97 L) (610 mm) (187 kg) (0.22 m3)
2WD Cooling system 30”................ 475 lb ......... 10.20 ft3
Brakes on................... 21’3” (6.48 m) w/heater ................... 17.4 qt (16.5 L) (762 mm) (215 kg) (0.29 m3)
Brakes off................... 24’8” (7.52 m) w/o heater................ 16.7 qt (15.8 L) 36”................ 535 lb ......... 12.70 ft3
4WD – engaged Window washer reservoir......... 2.5 qt (914 mm) (243 kg) (0.60 m3)
Brakes on................... 22’1” (6.72 m) (2.36 L) High Capacity Buckets
Brakes off................... 28’3” (8.62 m) Width Weight Heaped
4WD – disengaged 24”................ 450 lb .......... 8.50 ft3
Brakes on................... 22’0” (6.70 m) (610 mm) (204 kg) (0.24 m3)
Brakes off................... 25’3” (7.70 m) 30”................ 517 lb ......... 10.60 ft3
NOTE: Turning diameter dimensions curb to
(762 mm) (235 kg) (0.3 m3)
curb w/19.5L x 24 tires and 82” 580 Super M – page 2 of 6
(2.08 m) general purpose bucket.
 J

N B
E
H

O L K
M

LOADER DIMENSIONS
General Purpose Bucket* 4 IN 1® Bucket
A. Overall operating height – fully raised...................................................................... 13’11” (4.25 m) ............. 14’3” (4.34 m)
Height to –
B. Bucket hinge pin fully raised....................................................................................... 11’2” (3.4 m)................ 11’2” (3.4 m)
C. Bucket hinge pin @ SAE carry ................................................................................ 13.1” (334 mm) ........... 14.6” (372 mm)
D. Dump angle @ full height................................................................................................................. 45° ................................ 45°
E. Dump clearance @ full height, 45° dump –
Bucket............................................................................................................................ 8’10” (2.69 m).............. 8’11” (2.72 m)
Clam open....................................................................................................................................... NA ............... 9’8” (2.95 m)
F. Dump reach @ full height, 45° dump –
Bucket ......................................................................................................................... 27.7” (703 mm) ........... 25.5” (647 mm)
Clam open....................................................................................................................................... NA ........... 11.9” (302 mm)
Bucket rollback –
G. @ groundline ................................................................................................................................... 40° ................................ 40°
H. @ SAE carry..................................................................................................................................... 45° ................................ 45°
J. @ full height....................................................................................................................... Adjustable ................... Adjustable
K. Digging depth below grade –
Bucket flat..................................................................................................................... 5.9” (149 mm) ............. 6.8” (180 mm)
Clam open (dozing) ...................................................................................................................... NA ............. 4.1” (103 mm)
L. Reach from front axle centerline – bucket on ground ............................................... 75.2” (1.91 m).............. 72.7” (1.85 m)
Lift capacity to full height ....................................................................................... 6,182 lb (2804 kg) ....... 5,514 lb (2501 kg)
Breakout force –
Lift cylinders....................................................................................................... 9,164 lbf (40 760 N) .... 8,904 lbf (39 600 N)
Dump cylinders ................................................................................................. 9,480 lbf (42 170 N) .. 10,302 lbf (45 820 N)
Bucket cutting edge width........................................................................ 82” (2.08 m)/93” (2.36 m)................. 82” (2.08 m)
Maximum grading angle ................................................................................................................ 116°............................... 116°
Maximum clam opening.................................................................................................................. NA ........... 38.3” (972 mm)
Moldboard height ............................................................................................................................. NA ........... 36.8” (934 mm)
Raising time to full height .......................................................................................................... 3.4 sec........................... 3.4 sec
Bucket dumping time.................................................................................................................. 1.5 sec........................... 1.5 sec
Lowering time –
Power down .............................................................................................................................. 2.4 sec........................... 2.4 sec
Return-to-dig............................................................................................................................. 3.2 sec........................... 3.2 sec
Clam –
Open time ....................................................................................................................................... NA........................... 2.3 sec
Close time ....................................................................................................................................... NA........................... 3.1 sec
NOTE: Loader dimensions taken with 4WD,
19.5L x 24 rear tires and 82” (2.08 m) general 580 Super M – page 3 of 6
purpose bucket *without bolt-on cutting edge.
 DIMENSIONS
Standard Backhoe Extendahoe®
Retracted Extended
M. Overall transport length –
General purpose bucket ........................................... 22’7” (6.89 m) .............. 22’7” (6.89 m) ................................. NA
4 IN 1® bucket............................................................ 22’4” (6.82 m) .............. 22’6” (6.86 m) ................................. NA
Overall transport width................................................. 7’2” (2.18 m) ................ 7’2” (2.18 m) ................................. NA
Height –
To top of canopy.......................................................... 8’9” (2.67 m) ................ 8’9” (2.67 m) ................. 8’9” (2.67 m)
To top of cab............................................................... 8’10” (2.69 m) .............. 8’10” (2.69 m) ............... 8’10” (2.69 m)
To top of exhaust stack............................................... 8’6” (2.59 m) ................ 8’6” (2.59 m)................ 8’6” (2.59 m)
N. Transport .................................................................. 10’10” (3.29 m) .............. 11’3” (3.42 m) ................................. NA
Ground clearance at backhoe frame........................ 14.6” (371 mm)............ 14.6” (371 mm) ............ 14.6” (371 mm)
Angle of departure .......................................................................... 20° ................................. 20°.................................. 20°
Front wheel tread –
2WD............................................................................. 67.5” (1.71 m) .............. 67.5” (1.71 m) ............... 67.5” (1.71 m)
4WD............................................................................. 67.7” (1.72 m) .............. 67.7” (1.72 m) ............... 67.7” (1.72 m)
Width across tires
17.5L x 24 .................................................................... 81.7” (2.07 m) .............. 81.7” (2.07 m) ............... 81.7” (2.07 m)
19.5L x 24 .................................................................... 81.4” (2.67 m) .............. 81.4” (2.67 m) ............... 81.4” (2.67 m)
19.5L x 24 Wide Track ............................................... 88.0” (2.24 m) .............. 88.0” (2.24 m) ............... 88.0” (2.24 m)
O. Wheelbase –
2WD................................................................................ 84” (2.13 m) ................. 84” (2.13 m) .................. 84” (2.13 m)
4WD............................................................................. 84.5” (2.15 m) .............. 84.5” (2.15 m) ............... 84.5” (2.15 m)

NOTE: Dimensions taken with 19.5L x 24 rear tires and 11L x 16 front tires except that data marked 4WD is taken with 12 x 16.5 front tires.

CYLINDERS
Bore Diameter Rod Diameter Stroke
Loader
Lift (2) ...................................................................... 3.25” (82.6 mm)........... 1.75” (44.5 mm) ............ 30.2” (766 mm)
Bucket (2) ..................................................................... 3.0” (76 mm)............. 1.5” (38.1 mm) ............ 20.6” (522 mm)
4 IN 1® clam (2) ........................................................... 3.0” (76 mm)........... 1.75” (44.5 mm) .............. 9.1” (231 mm)
Backhoe
Boom........................................................................... 5.0” (127 mm)........... 2.25” (57.2 mm) ............ 33.2” (842 mm)
Dipperstick ................................................................ 5.0” (127 mm)................ 2.5” (63 mm) ............ 22.9” (583 mm)
Bucket ........................................................................... 3.5” (89 mm)................ 2.5” (63 mm) ............ 34.3” (872 mm)
Extendahoe® ................................................................ 3.0” (76 mm)........... 1.75” (44.5 mm) ............... 42.0” (1.07 m)
Swing (2) ................................................................. 4.0” (101.6 mm)............. 2.0” (50.8 mm)............. 11.5” (292 mm)
Stabilizer (2)............................................................. 4.25” (108 mm)............. 2.0” (50.8 mm) ............ 21.8” (553 mm)
Steering
2WD ......................................................................... 2.75” (69.9 mm)............. 1.5” (38.1 mm) .............. 6.7” (170 mm)
4WD ............................................................................ 2.48” (63 mm)............. 1.5” (38.1 mm) ............ 9.53” (242 mm)

580 Super M – page 4 of 6

BACKHOE LIFT CAPACITIES
Standard Backhoe Extendahoe®
Retracted Extended
Distance from Backhoe lift Distance from Backhoe lift Distance from Backhoe lift
Boom Lift swing pivot (m) capacity - lb (kg) swing pivot (m) capacity - lb (kg) swing pivot (m) capacity - lb (kg)

+16’ (4.87 m) .......................................................................................................................... 12’5” (3.79) ...... 1,140 (517)

+14’ (4.27 m) .... 8’7” (2.62) .... 2,240 (1016) ............ 9’6” (2.89) ...... 1,840 (835) ............ 14’7” (4.45) ...... 1,450 (658)
+12’ (3.66 m) .. 11’2” (3.40) .... 2,680 (1216) ........ 11’10” (3.61) .... 2,220 (1007) .......... 16’2” (4.93) ...... 1,580 (717)
+10’ (3.05 m) .. 12’9” (3.89) .... 2,750 (1247) .......... 13’4” (4.06) .... 2,400 (1089) .......... 17’2” (5.23) ...... 1,660 (753)
+8’ (2.44 m) .. 13’11” (4.24) .... 2,710 (1229) ............14’5” (4.40) .... 2,410 (1093) .......... 18’0” (5.49) ...... 1,690 (767)
+6’ (1.83 m) .... 14’7” (4.45) .... 2,680 (1216) .......... 15’2” (4.62) .... 2,390 (1084) .......... 18’7” (5.67) ..... 1,700 (771)
+4’ (1.22 m) .... 15’0” (4.57) .... 2,630 (1193) .......... 15’6” (4.72) .... 2,370 (1075) ........ 18’10” (5.74) ..... 1,700 (771)
+2’ (0.61 m) .... 15’1” (4.60) .... 2,560 (1161) .......... 15’7” (4.75) .... 2,330 (1057) ........ 18’11” (5.77) ..... 1,700 (771)
Ground Level .. 14’11” (4.55) .... 2,550 (1157) .......... 15’5” (4.70) .... 2,270 (1030) ........ 18’10” (5.74) ...... 1,690 (767)
-2’ (0.61 m)...... 14’5” (4.40) .... 2,460 (1116) .......... 15’0” (4.57) .... 2,230 (1011) .......... 18’5” (5.62)..... 1,650 (748)
-4’ (1.22 m)...... 13’7” (4.14) .... 2,380 (1079) .......... 14’2” (4.32) ...... 2,140 (971) ............ 17’9” (5.41) ...... 1,640 (744)
-6’ (1.83 m)...... 12’4” (3.76) .... 2,380 (1079) ........ 12’10” (3.91) ...... 2,150 (975) ............ 16’9” (5.11) ..... 1,640 (744)
-8’ (2.44 m)...... 10’5” (3.18) .... 2,380 (1079) .......... 11’2” (3.40) ...... 2,150 (975) ............ 15’7” (4.75) ...... 1,640 (744)
-10’ (3.05 m)...... 7’6” (2.28) .... 2,590 (1175) ............ 8’7” (2.62) .... 2,260 (1025) ........ 13’11” (4.24) ...... 1,700 (771)
-12’ (3.66 m)............................................................................................................................ 11’7” (3.53) ...... 1,860 (844)
-14’ (4.27 m)............................................................................................................................ 7’11” (2.41) .... 2,260 (1025)
Dipper Lift
+14’ (4.27 m) ..........................................................................................................................13’4” (4.06) .... 2,580 (1170)
+12’ (3.66 m) .. 10’1” (3.08) .... 4,940 (2241) .......... 10’7” (3.23) .... 4,360 (1978) .......... 14’3” (4.35) .... 2,680 (1216)
+10’ (3.05 m) .. 10’7” (3.23) .... 4,650 (2109) .......... 11’2” (3.40) .... 4,190 (1901) .......... 14’6” (4.42) .... 2,700 (1225)
+8’ (2.44 m) .... 10’6” (3.20) .... 4,680 (2123) ........ 10’11” (3.33) .... 4,160 (1887) .......... 14’5” (4.40) .... 2,880 (1306)
+6’ (1.83 m) ...... 9’7” (2.92) .... 5,290 (2400) .......... 10’2” (3.10) .... 4,680 (2123) ........ 13’11” (4.24) .... 2,910 (1320)
+4’ (1.22 m) ...... 7’5” (2.25) .... 6,610 (2998) ............ 8’3” (2.58) .... 5,590 (2536) ........ 12’11” (3.94) .... 3,050 (1383)

BACKHOE OPERATIONAL DATA

Extendahoe®
Standard Backhoe Retracted Extended
Digging depth –
Maximum....................................... 14’5” (4.39 m) ............................. 14’10” (4.52 m) .......................... 18’3” (5.56 m)
Maximum w/hi-capacity bucket.. 14’10” (4.52 m) ................................... 15’3” (4.65 m).............................. 18’8” (5.69 m)
2’ (610 mm) flat bottom ............... 14’3” (4.34 m) ............................... 14’8” (4.47 m) .......................... 18’2” (5.54 m)
8’ (2.44 m) flat bottom ................. 13’4” (4.06 m) ............................... 13’9” (4.19 m) .......................... 17’6” (5.33 m)
Overall reach from –
Rear axle centerline...................... 21’5” (6.53 m) ............................... 22’0” (6.70 m) .......................... 25’5” (7.75 m)
Swing pivot ................................... 18’1” (5.51 m) ............................... 18’5” (5.61 m) ........................ 21’10” (6.65 m)
Loading height ................................. 11’2” (3.40 m)................................ 11’5” (3.48 m) .......................... 13’3” (4.04 m)
Loading reach – dipper retracted .... 8’9” (2.67 m) ................................. 8’8” (2.64 m)........................... 11’6” (3.50 m)
Swing arc............................................................ 180° ................................................ 180° ........................................... 180°
Bucket rotation –
#1 position...................................................... 164° ................................................ 164° ........................................... 164°
#2 position...................................................... 200° ................................................ 190° ........................................... 190°
Stabilizer spread – operating ........... 9’5” (2.87 m) ................................. 9’5” (2.87 m) ............................ 9’5” (2.87 m)
Digging force –
Bucket cylinder ................. 12,821 lbf (57 031 N) .................... 12,821 lbf (57 031 N)............... 12,821 lbf (57 031 N)
Dipper cylinder................... 8,224 lbf (36 582 N) ...................... 7,784 lbf (25 066 N)................. 5,635 lbf (25 066 N)
w/bucket @ 50° w/bucket @ 50° w/bucket @ 51°
Leveling angle
maximum slope that backhoe
will make vertical cut ..................................... 12° .................................................. 12° ............................................. 12°

NOTE: Lift capacities apply straight to the rear of prime mover. Equipped with 24” (610 mm) Universal H.D. trenching bucket, Case
coupler and link except as noted.

580 Super M – page 5 of 6

S TANDARD EQUIPMENT
OPERATOR’S COMPARTMENT LOADER HYDRAULICS
See page 2 See page 2 2-spool loader control valve
6-spool backhoe control valve
ENGINE BACKHOE Heavy-duty oil cooler
Case 4T-390 turbocharged diesel See page 2
Automatic fan belt tensioner OTHER
POWERTRAIN Forward tilt engine hood
Integral engine oil cooling 2WD Replaceable, molded front bumpers
Fuel filter w/water trap 4F/4R Power shuttle synchromesh Front/rear tie downs
Air intake pre-cleaner transmission Reflective logos
Dual element air cleaner Torque converter Lights - Cab and Canopy
65 amp alternator Transmission de-clutch 2 Rear tail/stop
685 CCA 12-volt battery Electro-hydraulic differential lock 2 Front flashers/turn
Heavy-duty radiator w/coolant 2 Rear flashers/turn
Hydrostatic steering 4 Front & 4 rear adjustable
recovery bottle Wet disc brakes
Non-spark-arresting muffler halogen lights (55 w)
Remote lube front axle pivot

OPTIONAL EQUIPMENT
OPERATOR’S COMPARTMENT Cab right door POWERTRAIN
Cab with – Canopy Convenience Package 4WD w/outboard planetary drive,
Heater Front windshield w/wiper & on-the-go push-button activation
Defroster washer and 12 x 16.5 front tires
Dome light - door activated 85 dB(A) sound Powershift transmission (4WD
w/switch Floor mat unit only)
Wipers, front and rear Sun visor HYDRAULICS
Tinted glass Auxiliary hydraulics for handheld
Floor mat ENGINE equipment
Side window partial hold open Cold weather ether starting aid
Inside release for side windows Alternator, 95 amp OTHER
Operator Convenience Package Dual, 12-volt, 525 CCA batteries 17.5L x 24 rear tires
Tilt wheel Chaff screen 19.5L x 24 rear tires
Windshield washer w/adjust- Fuel tank, 40 gal (151 L) Tool box
able nozzles (front & rear) Special paint
LOADER Galaxy tires - Front
Sun visor Hydraulic attachment coupler
Deluxe Cab Package 4WD 12 L x 16.5 Soft Flex-Poly Fill
Attachment auxiliary hydraulics Galazy tires - Rear
Operator Convenience Package Buckets (see page 2)
PLUS 2/4WD 19.5 L x 24 w/TyrlynerTM
Vinyl-covered interior BACKHOE
Radio-ready kit w/antenna and Case integrated hydraulic coupler WIDE TRACK OPTION
speakers Buckets (see page 2) Offset tires - rear
Reduced sound level to 72 dB(A) Extendahoe® 19.5L x 24 12PR 88” (2.24 m)
Vinyl or cloth-covered mechanical Two-lever control track width
suspension seat Stabilizer pads 93” (2.36 m) long lip loader bucket
Air Ride suspension seat Flip-over
3” (76 mm) retractable seat belt Rubber pad
Cab air-conditioning, 100% filtered Front counterweights
air, in-cab access filter, 8 440 lb (200 kg)
adjustable roof vents, 2 floor 900 lb (408 kg)
vents, w/heater
Ride Control

NOTE: All specifications are stated in accor- IMPORTANT: Case Corporation reserves the © 2000 CASE CORPORATION
dance with SAE Standards or Recommended right to change these specifications without All Rights Reserved.
Practices, where applicable. notice and without incurring any obligation
relating to such change. Units shown may be CASE CONSTRUCTION EQUIPMENT
Form No. CE 252-10-00 equipped with non-standard equipment. CONTACT INFORMATION
Replaces Form No. - None Attachments from other manufacturers are
shown for illustration only. Case Corporation NORTH AMERICA/MEXICO
Case is a registered trademark of Case Corporation. does not warrant the safety or reliability of 700 STATE STREET
attachments from other manufacturers. RACINE, WI 53404 U.S.A.

Visit Case Corporation on the Web at:

http://www.casece.com
Printed in U.S.A.

580 Super M – page 6 of 6