/ Perfect Welding / Solar Energy / Perfect Charging

RAPID SHUTDOWN BOX

/ The convenient rapid shutdown solution for Fronius inverters.

AVAILABLE NOW: FRONIUS RAPID SHUTDOWN BOX DUO AND MULTI

AVAILABLE NOVEMBER 2017: FRONIUS RAPID SHUTDOWN BOX QUATTRO

/ The new generation Fronius Rapid Shutdown Box (RSB) provides a convenient solution for NEC 2014 (690.12) and
NEC 2017 (Array Disconnect) compliance, while enhancing overall rooftop and firefighter safety. Low-profile design,
installer-friendly mounting and wiring, make the Fronius Rapid Shutdown Box the ultimate solution for all Fronius
SnapINverters* in systems up to 600 V. Directly connected to the inverter through the same conduit as the DC
homeruns and powered by the array, the Fronius solution minimizes the number of components and eliminates the
need for an external power supply.
/ The low-profile design allows for installation underneath the modules, ensuring a clean system look. Thanks to the
NEMA 4X rating, the box is built for severe outdoor conditions. MC4 connectors, spring loaded terminals and generous
wiring space make wiring our new generation Rapid Shutdown Box even easier. Rapid Shutdown is triggered when AC
is not present at the inverter, rapidly discharging the DC lines to the inverter. This allows for a seamless, code compliant
solution to the NEC requirement for rapid shutdown functionality for PV systems on buildings.

SLEEK DESIGN EASY WIRING

/ Low-profile design that fits / MC connectors, spring load terminals
underneath a module for clean and generous wiring space
system look / 25A rated inputs for up to two strings
/ Mounting bracket with multiple per input (via MC4 “Y” connectors)
mounting options for maximum
flexibility
/ NEMA 4X rated for severe SMALL NUMBER OF COMPONENTS
outdoor conditions / Rapid Shutdown Box replaces
your junction box
/ DC-powered: no extra power
supply needed

SAMPLE CONFIGURATION DUO

Combined strings must be an equal number of modules

Activation wiring
DC wiring
* Excluding the Fronius Symo 15.0-3 208
SAMPLE CONFIGURATION QUATTRO

Combined strings must be an equal number of modules

Activation wiring
DC wiring

TECHNICAL DATA
GENERAL DATA RAPID SHUTDOWN BOX-DUO RAPID SHUTDOWN BOX-QUATTRO
Maximum voltage 600 VDC
Start voltage 80 VDC
Maximum input current 25A 25A/ 25A
Power Supply DC (from the PV array)
Typ. self-consumption during operation 2W
Input Circuits- MC-4 1(2 if used with MC-4 Y connector) 2(4 if used with MC-4 Y connectors)
Max. number of strings 2 4
Max. output current 25A 25A/ 25A
Output circuits-Spring clips 1 2
Max. DC homerun wire size AWG 8
Max. communication wire size AWG 14
Number of conduit ports 2
Conduit size 3/4in. and 1in.
For use with Amphenol H4/other connectors Remove MC-4 connectors and replace with UL listed connectors
External hardware required No
Permissible operating temperature range -40F to +149F (-40C to +65C)
Rel. humidity 0 ... 100% (non condensing)
Maximum installation elevation 13123 ft (4000m)
Enclosure Type Type 4X
Unit dimensions 11.3 x 9.7 x 2.8 inch 13.8 x 11.5 x 2.8 inch
All information is without guarantee in spite of careful editing - liability excluded. Copyright © 2011 Fronius™. All rights reserved.

(286 x 246.5 x 71.5 mm) (351 x 293 x 71.5 mm)

Unit weight 4 lbs. (1.8 kg) 6 lbs. (2.7 kg)
Compliance UL1741; LTR AE-004-2015; FCC 15 Class B
Fronius Galvo, Fronius Primo**, Fronius Symo (excluding the Fronius Symo 15.0-3
Text and images correspond to the current state of technology at the time of printing. Subject to modifications.

Compatible inverters 208) up to 600V

** Note: For automatic rapid shutdown functionality, the Primo 10-15kW must have a recent software version. Power stage SW2 seen in the inverter display “info” menu under “versions” must be
0.6.34.4 or greater (as shipped with serial number 27384701 or greater). Updates are available through software update file version fro27350.upd and can be easily downloaded at www.fronius-usa.
com/Primo-Update and installed via USB stick or remote update via Fronius Solar.web.
M,06,0241,EN-US Version 8.01.17

/ Perfect Welding / Solar Energy / Perfect Charging Fronius USA LLC

WE HAVE THREE DIVISIONS AND ONE PASSION: SHIFTING THE LIMITS OF POSSIBILITY. 6797 Fronius Drive
/ Whether welding technology, photovoltaics or battery charging technology − our goal is clearly defined: to be the innovation leader. With around Portage, IN 46368
3,700 employees worldwide, we shift the limits of what’s possible - our record of over 800 granted patents is testimony to this. While others progress
step by step, we innovate in leaps and bounds. Just as we’ve always done. The responsible use of our resources forms the basis of our corporate policy. USA
Further information about all Fronius products and our global sales partners and representatives can be found at www.fronius.com [email protected]
www.fronius-usa.com