Scribd
Upload
96 views

Pneumatic Sheet Metal Cutting Machine

The document describes a pneumatic sheet metal cutting machine that uses compressed air to power an automated cutting process. It consists of a pneumatic cylinder connected to a cutting blade via a linking joint. Material is placed on a supporting bed below the blade. Pipes, valves, and an electronic circuit connect the cylinder to a compressor and allow for either single or automatic repeated cuts at one-second intervals. The machine aims to automate industrial cutting processes for improved accuracy and efficiency over manual methods.

Uploaded by

Ranjith Thiruthuva Kani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
96 views

Pneumatic Sheet Metal Cutting Machine

The document describes a pneumatic sheet metal cutting machine that uses compressed air to power an automated cutting process. It consists of a pneumatic cylinder connected to a cutting blade via a linking joint. Material is placed on a supporting bed below the blade. Pipes, valves, and an electronic circuit connect the cylinder to a compressor and allow for either single or automatic repeated cuts at one-second intervals. The machine aims to automate industrial cutting processes for improved accuracy and efficiency over manual methods.

Uploaded by

Ranjith Thiruthuva Kani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Pneumatic Sheet Metal Cutting Machine

Cutting process is involved in almost every industrial process. So here we propose


a pneumatic based cutting machine that uses pneumatic strength for instant
cutting of small sheets and pipes. Manual cutting machines require a lot of
manual effort and also are not suitable for bulk cutting processes with accuracy.
The pneumatic cutting machine ensures exact cutting speed each time to get the
consistent cutting result without any break. The machine consists of a pneumatic
cylinder fabricated with a linking joint attached to it. This joint is assembled with a
cutter blade. We now have a bed to support the material horizontally positioned
in front of the cutter. These parts are fitted together in position using a metallic
frame. We use pipes and valves to connect the pneumatic cylinder with a
compressor through valve arrangement controlled by an electronic circuit. The
circuit has 2 push buttons. One button allows for single cut when pushed and
other allows for automatic cutting at 1 second intervals and continues operation
as long as the button is not pressed again to stop the machine. Thus we
demonstrate the pneumatic cutting machine for automating industrial cutting
process.
Components :

 Pneumatic Actuator

 Crank

 Shaft

 Cutter Blade

 Supporting Bed

 Pneumatic Pipes

 Pneumatic Fittings

 Pneumatic Valves

 Electronic Circuit

 Support & Mounts

Advantages :

 Easy To Use
 Automatic Cutting
 Consistent Cutting Results

You might also like