Scribd
Upload
819 views

Dumpy Level Survey Project

The dumpy level is a commonly used leveling instrument in surveying. It consists of a telescope secured by adjusting screws to a stage. The telescope can only rotate horizontally. A dumpy level is used to determine the relative elevations of different points on a surveying site. It has advantages such as simple construction, fewer adjustments needed, and rigidity. To conduct a dumpy level survey, a dumpy level, tripod, and staff are used along with an assistant. The dumpy level is mounted on a tripod and leveled using foot screws. An assistant holds a staff vertically at measurement points while readings are taken through the telescope.

Uploaded by

Yash Khanderao
Copyright
© © All Rights Reserved
819 views

Dumpy Level Survey Project

The dumpy level is a commonly used leveling instrument in surveying. It consists of a telescope secured by adjusting screws to a stage. The telescope can only rotate horizontally. A dumpy level is used to determine the relative elevations of different points on a surveying site. It has advantages such as simple construction, fewer adjustments needed, and rigidity. To conduct a dumpy level survey, a dumpy level, tripod, and staff are used along with an assistant. The dumpy level is mounted on a tripod and leveled using foot screws. An assistant holds a staff vertically at measurement points while readings are taken through the telescope.

Uploaded by

Yash Khanderao
Copyright
© © All Rights Reserved
You are on page 1/ 4

Dumpy Level Survey

Surveying is a very important part of civil engineering.


Knowledge of surveying is incomplete without the knowledge of
leveling. The dumpy level is a commonly used leveling instrument.
To be acquainted with this leveling instrument and learn how to
operate it one should read the following article carefully .

What is Dumpy Level?


The dumpy level is an optical surveying leveling instrument consisting a
telescope tube firmly secured in two collars fixed by adjusting screws to the
stage by the vertical spindle.
The telescope of dumpy level can rotate only in a horizontal plane. Relative
elevation of different points of a surveying land is determined with dumpy level.
English civil engineer is considered as the inventor of the dumpy level. He
invented dumpy level in 1832 while using the conventional .
A dumpy level is also called a builder's level, an automatic level.
Use of Dumpy Levels in Surveying

The dumpy level is mainly used in surveying for the following


purposes:

• To determine relative height and distance among different


locations of a surveying land.
• To determine relative distance among different locations of
a surveying land.

Advantages of Dumpy Level Survey


The dumpy level is a widely used surveying instrument in surveying.
The advantages which have made the dumpy level so popular is given
below.

• Simple construction with fewer movable parts.


• Fewer adjustments to be made.
• Due to the rigidity of dumpy levels, it retains its two adjustment
for a long time.
• High optical power.

Disadvantages of Dumpy Level Survey


There are few limitation or disadvantages of dumpy level. These
limitations are given below.

• Civil Engineers may find it difficult in making accurate


measurements.
• Difficulty in using.

Parts of Dumpy Levels


Following are the main parts of dumpy level instrument.
1. Telescope 7. Foot Screws
2. Eye-Piece 8. Upper parallel Plate
3. Ray Shade 9. Diaphragm Adjusting Screws
4. Objective End 10. Bubble Tube Adjusting Screws
5. Longitudinal Bubble 11. Transverse Bubble Tube
6. Focusing Screws 12. Foot Plate

How to Use a Dumpy Level for Surveying

To conduct dumpy level survey the following instruments is required.

• Dumpy Level
• Tripod
• E meter staff or English staffs

Also, an assistant will be required for a dumpy level survey. Once


everything is ready, the following steps should be followed for a
successful dumpy level survey.
• At first, the tripod is configured properly to hold the dumpy level.
The tripod height should be adjusted until it is on the eye level.
Then, legs of the tripod should be moved to a balanced position to
hold the instrument properly. Finally, tripod legs should be fixed
by pressing them to the ground.
• The dumpy level instrument is set up on the top of the tripod. Foot
screw is used to screw the device tightly on the tripod. As the
level head is very sensitive, special care is required in this step.
• To work properly, it is very important to make the dumpy level
completely horizontal. Using foot-screws (leveling screws) the
dumpy level is set to a leveled condition. Leveling screws should
be adjusted until the alignment bubble is in the center of the
marker.
• The operator looks through the eyepiece of the telescope.
• An assistant holds an E meter or staff vertical at the point under
measurement. Usually, this staff has both imperial and metric
measurements. The 'E' on the staff is equivalent to five
centimeters.
• The elevations (levels) of different points is gathered with the help
of the instrument and staff.
• Measurement generally starts from a benchmark with the known
height determined by a previous survey, or an arbitrary point with
an assumed height.

You might also like