Scribd
Upload
238 views1 page

JCOUSER03

The document is a test certificate from the Research and Control Laboratory of Rourkela Steel Plant certifying that structural steel plates meet Indian Standard IS 2062. It provides details on the chemical composition and mechanical properties of two casts that were tested and found to conform to the standard's requirements. A total of 4 pieces from the casts weighing 20.208 tons were manufactured by the BOF-LHF-RHOB-CC-NPM process route and certified for delivery.

Uploaded by

Neem Lal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
238 views1 page

JCOUSER03

The document is a test certificate from the Research and Control Laboratory of Rourkela Steel Plant certifying that structural steel plates meet Indian Standard IS 2062. It provides details on the chemical composition and mechanical properties of two casts that were tested and found to conform to the standard's requirements. A total of 4 pieces from the casts weighing 20.208 tons were manufactured by the BOF-LHF-RHOB-CC-NPM process route and certified for delivery.

Uploaded by

Neem Lal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

STEEL AUTHORITY OF INDIA LIMITED IS 2062 Page 1 of 1

ROURKELA STEEL PLANT


ROURKELA - 769011 (ODISHA)
RESEARCH AND CONTROL LABORATORY
Test Certificate For: HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL
Test Certificate No.: 622999 Dated: 29.01.2023 Product: PM Plate
To : HMM INFRA LIMITED Ambala 134003

It is certified that the materials described below fully conforms to IS 2062 - 2011. The chemical composition and Mechanical properties of the product as tested in accordance with the scheme of Testing and Inspection
contained in BIS Certification marks License No CM/L 0000053223 are as Indicated against each order. The material supplied conforms to standard Rolling and weight tolerances. (PLEASE REFER TO IS 2062 - 2011 FOR
DETAILS OF SPECIFICATION REQUIREMENTS )

Ladle Analysis
Cast No C% Mn% P% S% Si% Al% CE V% Ti% RHOB
2222835 0.1400 1.3300 0.0180 0.0140 0.2240 0.0400 0.3700 0.0400 0.0020 N
2300856 0.1500 1.3500 0.0280 0.0180 0.2780 0.0200 0.3850 0.0500 0.0010 Y
Sl. MP / SO No. Cast / Batch No. Size(mm) No of Grade / Mode Of Killing YS UTS El Bend CVN CVN CVN CVN
No. (TxWxL) Piece(s) Test (1) (2) (3) at 0
degC
(Avg)
(MPA) (MPA) (%) (J) (J) (J) (J)
1 1400670521 2300856 / SCC1330331 25x2500x12000 1 IS 2062 E350B0 / ALSIK / UNTRIM 380 519 27 OK 66 74 82 74
378 515 27 OK
2 1400670521 2300856 / SCC1330351 25x2500x12000 1 IS 2062 E350B0 / ALSIK / UNTRIM 380 519 27 OK 66 74 82 74
378 515 27 OK
3 1400678413 2222835 / SCC1329152 20x2200x11200 1 IS 2062 E350B0 / ALSIK / UNTRIM 380 520 27 OK 106 104 112 107
378 515 27 OK
4 1400678413 2222835 / SCC1329162 20x2200x11200 1 IS 2062 E350B0 / ALSIK / UNTRIM 380 520 27 OK 106 104 112 107
378 515 27 OK
Total Pieces : 4 Total Weight(Tons) : 20.208
Remarks : PROCESS ROUTE - BOF-LHF-RHOB-CC-NPM

ASIT KUMAR DAS


Dispatch Advice No.: 811444932 Dated: 26.01.2023 Wagon No: BOST/SEC/19140316438 Sr. Manager , R&C Lab
Rourkela Steel Plant

You might also like