23/10/2018 Services

MYCOM, through its efforts to develop, accumulate and combine various technologies based on the
above way of thinking is now able to offer a wide ranch of consistent services usually performed by
individual consulting, engineering, manufacturing and plant engineering firms. Providing world-class
technical service and expertise to customers of the Industrial Refrigeration Industry from the initial
start-up to 20 years later. We are there for our customers providing support and personal one on one
assistance on all aspects of service on MYCOM equipment and genuine Mycom parts, as well as other
manufacturers. Our trained service technicians have many years of combined experience, and travel
the globe to assist customers while providing the optimum level of service expected. This ability to
provide reliable, comprehensive services to the customer based on extensive know-how aspects of
industry is the cornerstone of MYCOM’s business.

"Since its founding in 1924, The experts at MYCOM service and support the following:
Mayekawa has focused on
the development of freezing Reciprocating Compressors
and cooling technology.Our Screw Compressors
technology began with Engineered Design
cooling applications and we Compressor Packages
developed various Control Panels
components such as Replacement Parts
compressors, heat On Site Training
engineering devices and Mycom Training Seminars
unmanned systems. Today On-Site overhaul of Mycom Compressors
we are moving into food On-Site Start up Supervision and Assistance
processing, automation
robotics and chemical plant
equipment fields in both the
domestic and international
arenas"
Recommended Maintenance

Screw Compressors

Maintenance:

• Oil Filters
• Compressor
• Oil Pump
• Compressor & Oil Pump Motors
• Compressor & Oil Pump Filters
• Control, Safety Interlocks & Set Points

after 500 Hrs • Compressor Motor -Check Hot Alignment.

every 5,000 Hrs every 10,000 Hrs every 25,000 Hrs

Compressor Shaft Seal - Compressor Bearings - Compressor Thrust

Check and repair it if Dismantle and check. Bearings - Dismantle and
abnormal. Replace if necessary. check. Replace if necessary.

Compressor Unloader - Oil Pump - Dismantle and Compressor Main/Side

Check and repair it if check. Replace if necessary. Bearings - Replace.
abnormal.
Compressor Oil - Submit Compressor O-Ring -
Suction Strainer - Dismantle oil sample for periodic Replace.
and clean - first 200 hours. analysis in a scheduled

http://www.mycomasia.com/services.html 1/2
23/10/2018 Services
program (6-12 months). Compressor Gasket -
Compressor Motor - Grease. Please follow manufacturer's Replace.
recommendations for oil type
& brand.

Coalescer Element -
Replace.

Oil Separator - Flush and

Drain.

Reciprocating
Compressors
Maintenance:

• Oil Level - Check daily.

• Compressor - Check head temperatures.
• Oil Pressure - Check daily. 30-40psig net.
• Compressor Motor & Belts - Check daily.
• Compressor Cuno Filter - Turn handle 1/2 turn daily.
• Control, Safety Interlocks & Set Points - Check weekly.

Yearly or Beginning of
Six Month Interval
Season

Compressor Shaft Seal - Check for oil or Compressor Bearings - Dismantle and check.
refrigerant leak. Replace if necessary.

Compressor Unloader - Check and repair it if Oil Pump - Dismantle and check. Replace if
abnormal. necessary.

Suction Strainer - Dismantle and clean. Oil Regulating Valve - Dismantle and clean.

Compressor Motor - Grease. Compressor Oil - Submit oil sample for periodic
analysis in a scheduled program. Drain crankcase
and refill as per MYCOM specs. Clean and replace
internal oil strainer.

Suction and Discharge Valve Assemblies -

Dismantle and repair if worn.

Back to Top

Copyright © 2005-2006. MYCOM ASIA GROUP. All Rights Reserved.

http://www.mycomasia.com/services.html 2/2