Scribd
Upload
3K views

How To Check Error Code 53

Error code 53 indicates an inverter soft start failure for SAKO inverters. To troubleshoot, disconnect all power sources and the load and turn on the inverter to isolate the issue. If the problem remains, open the top cover and check the DC to AC mosfet and drive circuit on the main board with a multimeter. Replace any damaged components such as the mosfet or drive circuit.

Uploaded by

Azar Pierre
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views

How To Check Error Code 53

Error code 53 indicates an inverter soft start failure for SAKO inverters. To troubleshoot, disconnect all power sources and the load and turn on the inverter to isolate the issue. If the problem remains, open the top cover and check the DC to AC mosfet and drive circuit on the main board with a multimeter. Replace any damaged components such as the mosfet or drive circuit.

Uploaded by

Azar Pierre
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Trouble shooting for error 53

Suitable for SAKO inverter: SUNSEE/SUNON/SUNON PLUS/SUNPOLO


Error code 53, Inverter soft start failed

Trouble shooting：
Step 1. Disconnect the load, grid input and solar input. Just connect battery and turn on the inverter.If still
problem, go to step 2.

Step 3. Disconnect all power source,and open the top cover, take out the main board, place the main board
on the insulated tables. Check the DC to AC mosfet and drive circuit with multimeter . If any damage, replace
them. (See below picture).

DC to AC mosfe

DC to AC drive circuit

You might also like