Scribd
Upload
40 views15 pages

User Manual

Connect to the "ELEGOO-123" WiFi network. Open the "EleRobot" app and select the "Conqueror Robot Tank" device which will confirm a successful connection. The app allows selecting modes like remote control, auto-follow, line-tracking, and obstacle avoidance to control the robot tank. It also enables programming motion and controlling program flow, sounds, lights, and sensors.

Uploaded by

east
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views15 pages

User Manual

Connect to the "ELEGOO-123" WiFi network. Open the "EleRobot" app and select the "Conqueror Robot Tank" device which will confirm a successful connection. The app allows selecting modes like remote control, auto-follow, line-tracking, and obstacle avoidance to control the robot tank. It also enables programming motion and controlling program flow, sounds, lights, and sensors.

Uploaded by

east
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

Turn on the WIFI on the phone and connect to“ELEGOO-123”.

(The number "123" is the physical address of the camera module,


and the physical address of each camera module is different.)
After the WIFI connection is successful, open the "EleRobot" APP
and click device“Conqueror Robot Tank”.

Go to the project selection page and click on the WIFI disconnected


icon“ ”on the top right corner, and it will display“ Device
connected successfully!”.
Choose the language by clicking the setting icon“ ”on the top
right corner.
Click“Remote control”to enter the control page.
Click on this icon“ ”can hide or display the icons of those four modes.

Standby Mode

Auto-follow Mode
Select Resolution

Line-tracking Mode

Obstacle-avoidance Mode
Control camera rotation:Horizontal and
vertical control range, 0°-180°

Rocker Control: Click on the left blank area can enable the rocker control panel,
it can control the movement of the Smart Robot Car and there is 8 direction in total.

Programming

The entry of the program, only the program module


that is connected to this graphics module will be
executed after the play button is clicked.
The current project name.
Click to save the project you edited.

List Button, click to show all saved items.

Play Button, click to start executing the program.


Pause Button, click to pause the program.

Motion: Graphic modules for controlling the movement of the car.


Show: Graphic modules for controlling the sound and light.
Controls: Graphic modules for controlling program flow.
Sensing: Graphic modules for sensor type electronic components.
Math: Graphic modules for mathematical operations.
Variables: Graphic modules for variable operation.

You might also like