Scribd
Upload
85 views3 pages

011-007 Exhaust Manifold, Dry

Uploaded by

Yè Winț
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
85 views3 pages

011-007 Exhaust Manifold, Dry

Uploaded by

Yè Winț
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

011-

011-007 Exhaust Manifold, Dry

Install

Install two guide studs.

Use an adhesive or heavy grease to


hold the gaskets in place on the
cylinder head.

NOTE:
NOTE: The side of the gasket
marked "OUT" must be away from
the cylinder heads.

Special capscrews with spacers are


required for this particular manifold.

Do not use short capscrews.


WARNING

This component or assembly


weighs greater than 23 kg [50
lb]. To prevent serious personal
injury, be sure to have
assistance or use appropriate
lifting equipment to lift this
component or assembly.

Install the exhaust manifold and


ten capscrews.

Remove the guide studs, and install


the remaining two capscrews.

NOTE:
NOTE: To aid in future capscrew
removal, apply a film of high
temperature anti-
anti-seize compound to
the capscrew threads.

Tighten the capscrews in the


sequence shown.

Repeat the sequence and tighten


the capscrews.

Torque Value:

1. 47 n.m [35 ft-lb]


2. 81 n.m [60 ft-lb]
Install the turbocharger. Refer to
Procedure 010-033 in Section 10.

Operate the engine and check for


leaks and engine operation.

Last Modified: 12-


12-Sep-
Sep-2011

Copyright © 2000-2010 Cummins Inc. All rights reserved.

You might also like