Learning Area TLE - Computer System Servicing Grade Level 9

W2 Quarter 3 Date

I. LESSON TITLE Using Hand Tools

II. MOST ESSENTIAL LEARNING
Prepare hand tools – TLE_IACSS9-12UHT-IIIb-18
COMPETENCIES (MELCs)
III. CONTENT/CORE CONTENT 2.1 Check appropriate hand tools for proper operation and safety.
2.2 Identify and mark unsafe or faulty tools for repair according to standard company
procedure.
References:
“CHS Module 2 & 3 - Using Hand Tools.” Accessed August 19, 2020.
https://www.scribd.com/doc/219418979/CHS-Module-2-Using-Hand-Tools.
“Cisco Press,” March 12, 2012.
https://www.ciscopress.com/articles/article.asp?p=2086239.
Guy, Repair. “For An Effective Flat Head Screwdriver Use, Follow 3 Tips,” July 27, 2020.
https://repairinggear.com/3-tips-to-use-the-flat-head-screwdriver/.
Accessed October 24, 2020. https://www.wisegeek.com/what-is-a-hex-
screwdriver.htm.

Suggested
IV. LEARNING PHASES Learning Activities
Timeframe
A. Introduction 1 hour In many types of work, hand tools are used everyday. They make work easier
Panimula and allow people to be more efficient. However, many students often fail to
see the hazards these tools can present. In this lesson you will learn how
accidents can be significantly reduced and review the various hazards that
are associated with specific types of tools.

A. Below are the pictures of hand tools. Tell whether the tool is SAFE or UNSAFE.
Write your answer on a separate sheet.

_________1. _________4.
Photo from: https:// Photo from: https://www.sliceproducts.com/
www.thingiverse.com/thing:3405552 ceramic-vs-stainless-steel-knives

_________2. _________5.
Photo rom: https://www.homedepot. ca/product/ Photo from: https://capritools.com/shop/
hdx-6-inch-long-nose- pliers/1000776741 reversible-ratcheting-wrenches-sae/

_________3.
Photo from: https://www.autoguide.com/best-wire-cutters

B. Have you ever tried using the tools on activity A? What are the safety
precautions you must consider while using it? Write your answer on a separate
sheet.

1. Screwdriver – ________________________________________________________
2. Long Nose Pliers – ____________________________________________________
3. Wire Cutter – _________________________________________________________
4. Knife – _______________________________________________________________
5. Wrench – ____________________________________________________________

CLMD R4A
CALABARZON | ASSESSMENT TOOL TO EVALUATE THE PIVOT LEARNER’S PACKET
 C. Read and process the meaning of quotation. Write down your insights on
a sheet of paper.

______________________________________

______________________________________

______________________________________

______________________________________

______________________________________

_____________________________________
Photo from: https://www.pinterest.ph/pin/563442603365573507/

B. Development 1 hour Hand tools include a wide variety of non-powered devices, such as wrenches,
Pagpapaunlad pliers, hammers and screwdrivers. Such devices may seem harmless, but they
cause a lot of injuries. The two most common hazards associated with the use
of hand tools include misuse and improper maintenance.
Read and understand the information in the following link:
Information Sheet 2.2
Unsafe or Faulty Tools
Lo2. Prepare Hand Tools Page #8 and #9
https://www.scribd.com/doc/219418979/CHS-Module-2-Using-Hand-Tools
For An Effective Flat Head Screwdriver Use
https://repairinggear.com/3-tips-to-use-the-flat-head-screwdriver/
Hex Screwdriver
https://www.wisegeek.com/what-is-a-hex-screwdriver.htm

A. Directions. Enumerate what is being asked. Write your answer on a

separate sheet.
I. Do’s and Don’ts in using hand tools.
1. _________________________________________________________
2. _________________________________________________________
3. _________________________________________________________
4. _________________________________________________________
5. _________________________________________________________
II. General Hazards
1. _________________________________________________________
2. _________________________________________________________
3. _________________________________________________________
III. Why is it important to use safe tools?
__________________________________________________________________________
____________________________________________________
B. Directions. Enumerate what is being asked. What are the cautions that we
should bear in mind in using the following hand tools?
HAND TOOLS CAUTION
1. Flat-Head Screwdriver

2. Hex Driver

3. Phillips-Head Screwdriver

4. Component Retrieving Tools

CLMD R4A
CALABARZON | ASSESSMENT TOOL TO EVALUATE THE PIVOT LEARNER’S PACKET
 C. Engagement 1 hour A. Make a poster about the positive effects of the proper use of hand tools.
Pakikipagpalihan Do your activity in an OSLO paper. Refer to the rubrics below.
Category 10 7 5 3
Graphics − All graphics are All graphics are Some graphics Graphics do not
Relevance related to the topic related to the topic relate to the topic. relate to the
and make it easier to and most make it topic
understand. easier to
understand.
Graphics − Graphics are all in Most graphics are in Most graphics are Many graphics
Clarity focus and the content focus and the in focus and the are not clear or
easily viewed content easily content easily are too small.
viewed viewed
Attractiveness The poster is The poster is The poster is The poster is
exceptionally attractive in terms of acceptably distractingly
attractive in terms of design, layout, and attractive though it messy or very
design, layout, and neatness. may be a bit messy. poorly designed.
neatness. It is not attractive.
Timeliness The poster submitted The poster submitted The poster The poster
before the deadline on time submitted 1 week submitted 2
after deadline weeks after
deadline
:
Rubric from http://eworkshop.on.ca/edu/pdf/Mod32_Poster_Rubric.pdf

B. Gather all the unsafe hand tools that are present in your home.
Put those tools in a safe container and label it FAULTY HAND TOOLS.
Write below information on a separate sheet.
Name of Tool Reason why it's unsafe to use Repairable Unrepairable

D. Assimilation 1 hour Directions. In the graphic organizer below, write down your learnings in our
Paglalapat lesson.

Faulty or unsafe hand tools.

Proper Use
of Hand
Tools

V. ASSESSMENT 1 hour
(Learning Activity Sheets for A. Directions. Write True if the underlined word is correct, if it is False change
Enrichment, Remediation or
Assessment to be given on Weeks
the underlined word to make the statement correct.
3 and 6)
_________ 1. Pencils cannot be used inside the computer to adjust the settings
of the switches or to delete the jumpers.
_________ 2. Needle-nose pliers and hex drivers may be used to position and
retrieve pieces that may be difficult to reach with your fingertips.
_________ 3. Hex driver is used to loosen and tighten the bolts with a hexagonal
(six-sided) head.
_________ 4. Flat-head screwdriver are used to remove a crosshead screw
_________ 5. Never use a screwdriver as a pry bar.

CLMD R4A
CALABARZON | ASSESSMENT TOOL TO EVALUATE THE PIVOT LEARNER’S PACKET
 B. Directions. Read the questions carefully and choose the letter of the best
answer.
1. Which tool is used to retrieve parts from location that are too small for
your hand to fit?
a. Flashlight c. Punch down
b. Part Retriever d. Wire cutter
2. Which tool is used to manipulate small parts?
a. Hex Driver c. Tweezers
b. Needle-nose plier d. Wire cutter
3. Which tool is used to loosen or tighten crosshead screws?
a. Flat head screwdriver c. Needle-nose plier
b. Hex driver d. Philips head screwdriver
4. What is a device for performing work on a material or a physical system
using only hands?
a. Cleaning tool c. ESD tool
b. Diagnostic tool d. Hand tool
5. Which tool is used to tighten nuts in the same way that a screwdriver
tightens screws?
a. Hex driver c. Torx screwdriver
b. Part Retriever d. Wire cutter

VI. REFLECTION ● The learner communicates the explanation of their personal

assessment as indicated in the Learner’s Assessment Card.
● The learner, in their notebook, will write their personal insights about
the lesson using the prompts below.
I understand that ___________________.
I realize that ________________________.
I need to learn more about __________.

Prepared by: Ana Jane S. Faylon/Loida S. Narvaez Checked by: Florinda C. Gagasa
TLE-ICT-CY9-w2

CLMD R4A
CALABARZON | ASSESSMENT TOOL TO EVALUATE THE PIVOT LEARNER’S PACKET