Scribd
Upload
77 views

Msp250as 27

München Energieprodukte is a global provider of solar modules and technology. They focus on innovation, reliability, quality and value. Their MSP250AS-27 polycrystalline solar module has 250W maximum power output, 16.97% module efficiency, and is tested for harsh environments. It comes with a 12-year product and 25-year power output warranty.

Uploaded by

Conti Systems Solutions
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views

Msp250as 27

München Energieprodukte is a global provider of solar modules and technology. They focus on innovation, reliability, quality and value. Their MSP250AS-27 polycrystalline solar module has 250W maximum power output, 16.97% module efficiency, and is tested for harsh environments. It comes with a 12-year product and 25-year power output warranty.

Uploaded by

Conti Systems Solutions
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

U 54 Cells

Polycrystalline Module
MSP250AS -27
ABOUT MÜNCHEN ENERGIEPRODUKTE
• München Energieprodukte is one of the most innovation, reliability, quality and value
focused companies in the entire sector thanks to its focus on solar modules and
technology ranging from roof systems to full-scale power plants. With markets in
Germany, Japan, China, Australia and the Americas, München Energieprodukte is truly
a global provider in the field of solar power.
•Whether you’re picking solar modules for your residential / commercial roof system or
power plant, you know you can rely on the München Energieprodukte brand.
Customers who choose München Energieprodukte know we will deliver maximum
performance with the highest quality product at the best value.

PERFORMANCE
•Tight positive power tolerance of -0%/W to +5%/W ensures you receive modules at or

above nameplate power and contributes to minimizing module mismatch losses leading

to improved system yield.

•Monocrystalline silicon solar cells with low-iron tempered high transmission and

textured glass deliver a module efficiency of up to 20.0%, maximizing the kWh output of

your system per unit area.

QUALITY & RELIABILITY


•Tested for harsh environments

(salt mist and ammonia corrosion testing: IEC 61701, DIN 50916:1985 T2)

•Modules independently tested to ensure conformance with certification and

regulatory standards.

WARRANTIES
•12 year limited product warranty

•25 year limited power output warranty

Please refer to our Warranty Terms and Conditions


U 18.84% Cells Efficiency

Polycrystalline Module MSP250AS -27


Electrical parameters at Standard Test Conditions (STC) MODULE DIMENSION DETAILS
Unit：MM
AT STC(AM1.5,Temp 25℃,E 1000W/㎡)
Module Type MSP250AS -27
Power output Pmax 250w
Power output tolerances ΔPmax 0~+5w
Module efficiency m 16.97%
Voltage at Pmax Vmp 28.16V
Current at Pmax Imp 8.88A
Open circuit voltage Voc 33.80V
Short circuit current Isc 9.16A
STC: 1000W/m ² irradiance, 25 ˚ C cell temperature, AM1.5g spectrum according to EN
60904-3. Average relative efficiency reduction of 5% at 200W/m² according to EN 60904-1.

THERMAL CHARACTERISTICS
Nominal operating cell temperature NOCT ˚C 45 +/-2
Temperature coefficient of Pmax γ Pmax %/k -0.38
Temperature coefficient of Voc β Voc mV/k -114
Temperature coefficient of Isc α Isc mA/k +4.1
Frame Section
NOCT:open-circuit module operation temperature at 800W/m² irradiance,20˚Cambient temperature,1m/s wind

OPERATING CONDITIONS
Max. System Voltage 1500VDC
Max. series fuse rating 15A
Limiting reverse current 15A
Operating temperature range -40˚C to 85˚C
Max.staticload,front(e.g.,snow and wind) 5400Pa
Max. static load, back (e.g., wind) 2400Pa
Max.hailstone impact(diameter/velocity) 25mm / 23m/s

MECHANICAL CHARACTERISTICS
low-iron tempered
Front Cover (material / thickness)
glass / 3.2mm
Cell (quantity) 54 pcs(6*9)
Encapsulant (material) EVA
Frame material anodized aluminum alloy
Junction box (protection degree) ≥ IP67 with bypass-diode
Cable (length / cross sectional area) 1000mm / 4mm²
Plug connector(type/protection degree) MC4 / IP67
Fire Safety Classification (IEC 61730) Class C

Specifications are subject to change without notice.

GENERAL CHARACTERISTIC
Dimensions 1485mm / 992mm / 40mm
Weight 15.8kg

2019 Mȕnchen Energieprodukte GmbH. All rights reserved.


Specifications included in this datasheet are subject to change without notice.

You might also like