Scribd
Upload
167 views

VLSM

VLSM (Variable Length Subnet Mask) subnetting allows for subnets of variable sizes and host counts, unlike FLSM which requires all subnets to be equal in size. VLSM supports only classless routing protocols and wastes fewer IP addresses by allowing optimization of subnet masks for different subnet needs. The document provides steps for implementing VLSM on a sample network, including arranging subnets by size and assigning appropriate variable length subnet masks and host ranges.

Uploaded by

hạnh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
167 views

VLSM

VLSM (Variable Length Subnet Mask) subnetting allows for subnets of variable sizes and host counts, unlike FLSM which requires all subnets to be equal in size. VLSM supports only classless routing protocols and wastes fewer IP addresses by allowing optimization of subnet masks for different subnet needs. The document provides steps for implementing VLSM on a sample network, including arranging subnets by size and assigning appropriate variable length subnet masks and host ranges.

Uploaded by

hạnh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Variable Length Subnet Masks

Subnetting
(VLSM)
VLSM vs. FLSM

FLSM (Fixed Length Subnet Masks) Subnetting VLSM (Variable Length Subnet Masks) Subnetting

Old-fashioned Modern

Subnets are equal in size Subnets are variable in size

Subnets have an equal number of hosts Subnets have a variable number of hosts

Supports both classful and classless routing protocols Supports only classless routing protocols

Wastes more IP addresses Wastes fewer IP addresses

Subnets use the same subnet mask Subnets use different subnet masks

Simple configuration and administration Complex configuration and administration


Implementing VLSM Subnetting

192.168.4.0/24
VLSM subnetting chart

Subnet 1 2 4 8 16 32 64 128 256

Host 256 128 64 32 16 8 4 2 1

Subnet
/24 /25 /26 /27 /28 /29 /30 /31 /32
Mask
Step 1: Arrange the networks from the largest to the smallest

LAN Name No of Host


LAN A 60
LAN B 29
LAN C 14
Link AB 2
Link AC 2
Link BC 2
Step 2: Implement VLSM subnetting for the largest network
(LAN A)
Subnet
Network ID Total Host Usable Host Range Name of LAN
Mask

192.168.4.0 /26 64 192.168.4.1–192.168.4.62 LAN A

192.168.4.64 /26 64 Unassigned

192.168.4.128 /26 64 Unassigned

192.168.4.192 /26 64 Unassigned


Step 3: Implement VLSM subnetting for the second-largest
network (LAN B)
Subnet
Network ID Total Host Usable Host Range Name of LAN
Mask

192.168.4.64 /27 32 192.168.4.65 – 192.168.4.94 LAN B

192.168.4.96 /27 32 Unassigned


Step 4: Implement VLSM subnetting for LAN C

Subnet
Network ID Total Host Usable Host Range Name of LAN
Mask

192.168.4.96 /28 16 192.168.4.97– 192.168.4.110 LAN C

192.168.4.112 /28 16 Unassigned


Step 5: Implement VLSM subnetting for Link AB, BC, and AC

Subnet
Network ID Total Host Usable Host Range Name of LAN
Mask

192.168.4.112 /30 4 192.168.4.113–192.168.4.114 LINK AB

192.168.4.116 /30 4 192.168.4.117–192.168.4.118 LINK AC

192.168.4.120 /30 4 192.168.4.121–192.168.4.122 LINK BC

192.168.4.124 /30 4 Unassigned


Whole IP plan
Subnet
Network ID Total Host Usable Host Range Name of LAN
Mask

192.168.4.0 /26 64 192.168.4.1–192.168.4.62 LAN A

192.168.4.64 /27 32 192.168.4.65 – 192.168.4.94 LAN B

192.168.4.96 /28 16 192.168.4.97– 192.168.4.110 LAN C

192.168.4.112 /30 4 192.168.4.113–192.168.4.114 LINK AB

192.168.4.116 /30 4 192.168.4.117–192.168.4.118 LINK AC

192.168.4.120 /30 4 192.168.4.121–192.168.4.122 LINK BC

You might also like