Scribd
Upload
483 views

Lazy River Design List

1. The document provides specifications for 6 variants of pump configurations to power lazy rivers for a project at the Hong Kong Jockey Club. 2. It details the number of nozzles, type of pumps, flow rate in cubic meters per hour, and resulting average flow speed in meters per second and miles per hour for each variant. 3. The river is specified to be 2.4 meters wide, 72 meters long, with a water depth of 1 meter, and the calculations are based on a free-flowing pipework system without elbows or 90-degree fittings.

Uploaded by

Jason Ma
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
483 views

Lazy River Design List

1. The document provides specifications for 6 variants of pump configurations to power lazy rivers for a project at the Hong Kong Jockey Club. 2. It details the number of nozzles, type of pumps, flow rate in cubic meters per hour, and resulting average flow speed in meters per second and miles per hour for each variant. 3. The river is specified to be 2.4 meters wide, 72 meters long, with a water depth of 1 meter, and the calculations are based on a free-flowing pipework system without elbows or 90-degree fittings.

Uploaded by

Jason Ma
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Speed calculation of a Lazy River

Project : Hong Kong Jockey Club


Date : 21. Feb. 2013

Pump specifications
Type of the
Variante nozzle pumps Q average flow speed Type of the River
pumps
[m/s]
3 [mph]
Nr. pcs. pcs. [ m /h ] metres per
miles per hour
second
1 6 NB 20025/4-15 2 600 0,30 0,67 Lazy River slow 4
2 8 NB 20025/4-18,5 2 800 0,40 0,89 Lazy River slow 4
3 12 NB 20025/4-15 4 1200 0,60 1,34 Lazy River 4
4 16 NB 20025/4-18,5 4 1600 0,80 1,79 Lazy River 4
5 18 NB 20025/4-15 6 1800 0,90 2,01 Lazy River 4
6 24 NB 20025/4-18,5 6 2400 1,20 2,68 Lazy River 4

River width: 2,4 m


River length: 72 m
Depth of water: 1 m

Important !
This calculation is based on a free-flowing pipework system. Elbows and 90° T-fittings causing loss should not be used.
Any alteration of the channel profile or of the inlet angle automatically changes the above calculated average flow rate.
The average flow rate is calculated for and with fluvo-Schmalenberger products only.
The inlet angle, precise positioning of the jets and pipework dimensions can only be calculated after receipt of the purchase order and of current drawings.

Fa.Schmalenberger -Strömungstechnologie- Im Schelmen 9-11 72072 Tübingen - Weilheim Tel. +49(0)7071 - 7008-0 Fax: +49(0)7071 - 7008-14 Hong Kong Jockey Club

You might also like