Scribd
Upload
62 views2 pages

BLR - CM - A Catalogue

The BLR CM 3A is a 3-phase power factor control relay and power analyzer that offers advanced power factor correction and monitoring capabilities. It can automatically control capacitor banks through contactors or thyristors to optimize power factor. It also provides comprehensive power measurements and can communicate via RS485 MODBUS protocol. It offers flexible configurations with options for 6 or 12 relay or transistor outputs to control various capacitor arrangements.

Uploaded by

RnDES1 CML
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views2 pages

BLR - CM - A Catalogue

The BLR CM 3A is a 3-phase power factor control relay and power analyzer that offers advanced power factor correction and monitoring capabilities. It can automatically control capacitor banks through contactors or thyristors to optimize power factor. It also provides comprehensive power measurements and can communicate via RS485 MODBUS protocol. It offers flexible configurations with options for 6 or 12 relay or transistor outputs to control various capacitor arrangements.

Uploaded by

RnDES1 CML
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Power Factor Control Energy Management Static Switching

BLR CM 3A 3-phase power factor control relay & power analyzer

• Microprocessor controlled power factor controller with 3-phase measurement system and display of measurement values
• Full-automatic c/k-value setting, self adapting, connection of different capacitor step sizes possible
• Automatic detection and usage of the optimum capacitor step
• Manual mode possible
• Multiple connection types possible through adjustable phase compensation angle
• Capable for 4-quadrant operation
• Individually configurable discharging time allows quicker switching time
• 3-phase measurement system also suitable for non-sinusodial currents and voltages
• Graphical LCD for display of step status, measurement values and system data
• Measurement display for U, I, P, Q, S, THD U, THD I, Q, F, T
• Harmonics measurement for voltage and current up to the 31. order
• Counter for active and reactive work
• Flexible alarm system with up to 15 alarms
• Programmable digital input and digital output
• Programmable alarm relay with volt-free c/o contact
• Supply voltage 115/230V, 45-65Hz, other voltages on request
• Voltage measuring 50 – 530V, 45 – 65Hz
• Current measuring 3 x 15mA – 5A, suitable for CT x/1A and x/5A
• Connection with pluggable screw terminals
• Instrument casing for cutout 144 x 144mm, depth 49mm
• Protection class IP20 (casing), IP50 (front)

The BLR CM 3A, presents a revolutionary technology in power factor and capacitor control operations. The relays are capable of a
host of all modern needs of capacitor monitoring and control, but does not stop there. It has capabilities to perform exact phase-wise
compensation, if the necessary steps of capacitors are made available. This will enable true accuracy in compensation on each
phase, even if there exists imbalance in the load conditions between the three phases of an installation.

Because of the integrated comprehensive measurements, the BLR CM 3A can also be utilized for its power analysis, measurement
and communication capabilities, including RS485 with MODBUS protocol. The BLR CM3A is further equipped like other CM relays,
with the capability of controlling capacitor banks, connected via contactors or via thyristor modules, or even a hybrid version. This
will facilitate the operation of both coarse tuning as well as rapid compensation for fine tuning the power factor management in an
installation.

Description Model Type

Power Factor Control Relay BLR-CM 3-phase with 6 relay outputs CM 06R –3A

Power Factor Control Relay BLR-CM 3-phase with 12 relay outputs CM 12R –3A

Power Factor Control Relay BLR-CM 3-phase with 6 transistor outputs CM 06T –3A

Power Factor Control Relay BLR-CM 3-phase with 12 transistor outputs CM 12T –3A

Power Factor Control Relay BLR-CM 3-phase with 6 relay and 6 transistor outputs CM 12RT –3A
Options Options Type
Interface RS485 protocol Modbus RTU - MB
Accessories Accessory Type
Transparent cover with lock IP54 - VT
BLR CM, THREE PHASE, connection chart

www.processtechnique.com
324 Konena Agrahara, Vimanapura Post
Bangalore 560 017. India
Phone +91 80 2522 3736
+91 80 2522 8895
Telefax +91 80 4125 8146
e-Mail [email protected]

You might also like