Exp 7 Different Tupe of Stator PDF
Exp 7 Different Tupe of Stator PDF
OTDR
S
wwwwww.
uR39
1P
wwww
www.
DIRECT ON LINE STARTER
(DOL
TCTP
DOL
Starter
Fa
e
STAR-DELTA STARTER
ICTP
R
A-A
Storter
C
86
Cvo
AlUTO TRANSFORMER STARTER
CT
L M
o
mm
ulur8 Ro tor
Squmel Cage Type
mmhm
STATOR RESISTANCE STARTER
TOTP
mmm P
STATOR ROTOR
KISP/DEE/RM/E18RAS7/EXP_12
Enrollment No.- FEEG201088
DOP:-2 i/o2/22 DOS:-
Title: Comparison between various starting methods of3 Phase Induction Motor.
Objectives:
A. To study the requirements of starting of 3 ph I.M.
B. To study different methods of starting of 3 ph I.M.
C. Compare the different of obtaining highest starting torque.
1. Current: Starting current should be limited to 3 to 4 times the rated current. Higher
starting current may not be objectionable for motor, but it may disturb other loads
working in parallel, because of voltage drop in the line. The voltage drop may be high as
Ts Es CR2+ Xr)
at higher vo ltages the
3.5kW and large motors operating
For small motors up to be
stated above and the motors may
current* may be within limits
breakaway starting
started direct on line.
be done
current is higher and has to be limited. It may
Where the breakaway starting at start.
or by increasing impedance
either by reducing voltage applied
addition
static friction and inertia ete,
in
overcome
should be sufficient to
2. Torque: Torque lf starting torque developed
is too small, motor may
not start
For L.M.
Ts XT*Rr
Ts F
KJSP/DEE/RM/E18RAS7/EXP_3
This carries negligible current during starting. Under running condit ion this cage produces most
of the torque.
current.
**Ibs is the breakaway starting
Conclusion
Cearn and Compartd differeok stortinq
methods of 3-phas Incduchon Maor