0% found this document useful (0 votes)

316 views

Power Tools

This document is a catalog for power tools produced by Uryu, a Japanese manufacturer of pneumatic tools established in 1915. The catalog contains information on battery and electric oil-pulse tools, pneumatic tools, abrasive tools, drills, tappers, percussion tools, and testers and accessories. Specification details are provided for each tool type, including model, capacity, torque range, speed, weight, dimensions, and other technical specifications.

Uploaded by

Kinastryan Jita Kroda

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

316 views

Power Tools

Uploaded by

Kinastryan Jita Kroda

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 100

POWER TOOLS GENERAL CATALOG

FEEL

BATTERY OIL-PULSE TOOLS

UBX-AF series UBX-AF500Z / AF600Z / AF700Z

UBX-T series UBX-T70 / T80

ELECTRIC OIL-PULSE TOOLS

UCX-AF series UCX-AF600L / AF600 / AF700

POWER T OOLS G EN E R A L C ATA L O G 1

PIONEER of PNEUMATIC
TOOLS in JAPAN
established in 1915

Since established in 1915 as the pioneer manufacturer of pneumatic tools in Japan,

we have been maintaining the top leading position in all respects. Now, the name of
"URYU" has become remarkably popular worldwide with the customers who love
quality. It is our honor to introduce our latest products to you with this catalog for
your additional productivity and greater profit.

URYU has acquired ISO14001 and ISO9001 certifications.

2 P OW E R TO O LS G E NE R AL C ATALO G
CON T E N T S
BOLT & NUT SETTERS 5
Features of PHOENIX Pulse Unit (PAT.) 6
SELECTION CHART 8

BATTERY OIL-PULSE TOOLS

UBX-AF SERIES 11
UBX-T SERIES 13

BOLT & NUT SE T T E R S

BP-T SERIES 14

SUPER "INTELEC" SYSTEM SERIES 19

OIL-PULSE TOOLS

UAT SERIES 32
UL SERIES 34
CORNER TYPE 35

SCRE W D RI VE RS
U / UX / UXR SERIES 36

RATCHET WRENCHES 37

OPEN-END / GEARED WRENCHES 38

ANGLE NUTRUNNERS 39

AB RASIV E T O O LS
IMPACT WRENCHES 40

SELECTION CHART 41

FASTENING COUNTER WITH POKA-YOKE 46

NUTRUNNERS 48

DRILLS & TAP P ERS

SCREWDRIVERS 49
SELECTION CHART 51
TORQUE CONTROL 52
CUSHION CLUTCH / DIRECT DRIVE / IMPACT 54

ABRASIVE TOOLS 58

P ERC U SSIO N T O OLS

GRINDERS 59

SANDERS / POLISHERS 64

DRILLS & TAPPERS 67

T ESTERS & AC CESSO RIES

DRILLS 68

TAPPERS 70

PERCUSSION TOOLS 71
RIVETING HAMMERS 72
N OI SE & VI BRATI ON

IMPACT CUTTERS / FLUX CHIPPERS 74

CHIPPING HAMMERS 75

TESTERS & ACCESSORIES 77

TESTERS 78

ACCESSORIES 82

SAFETY MANUAL 83

NOISE & VIBRATION 86

INDEX / URYU NETWORK 96

POWER T OOLS G EN E R A L C ATA L O G 3

Explanation of each item in Specifications
1 2 3 4 5 6 7 8 9 10 11 12
Capacity Overall Air Inlet
(Nominal Torque Range Free Speed Weight From Center Sq. Drive or Thread Average Air
Air Hose Size Consumption
Model Bolt Size) min -1
Length to Outside Hex. Size (Pipe Tap) Code
ft-lbs 0.4MPa 0.5MPa 0.6MPa mm
3 3
mm in Nm in kg lb mm in mm in in mm in m /min ft /min

13 14 15 16 17 18 19
Capacity
Max. Torque Hex. size of Ratchet Hex. size of Gear socket Hex. Size of Bit Capacity (Wheel Size) Drilling Capacity
(Pad/Paper Size)

Nm ft-lbs mm in mm in mm in mm in mm in mm in

1 Model 10 Air Hose Size

A tool type together with numerals represents the model name. For query or order, It shows the appropriate inside diameter of an air hose for air supply. Please be
please specify this Model. noted that the provided capacity may not be achieved if any other air hose besides
the recommended inside diameter is used.
2 Capacity (Nominal Bolt Size)
For tool selection when a required torque is vague or not clearly specified, choose an 11 Average Air Consumption
appropriate model by referring to capacity. For the optimal torque by equation for each It shows air volume to be consumed by the tool. It indicates the value when the air
size of bolt, please refer to P. 38. When a required torque is specified, please refer to is returned to free atmosphere pressure. Therefore, the average air consumption is
the next item, Torque Range. approx. 1/6 of listed value when the supplied air pressure is 0.5MPa.

3 Torque Range 12 Code

It shows the torque for a type of tool measured by a tester and the like. The value is It shows our computer code for each model.
a measured torque in accordance with our measuring standard, which is not always
identical to a break-away torque value. For a torque-adjustable model, torques with 13 Max. Torque
low & upper-limit are indicated respectively for the specified air pressure.
It shows the fastening ability for stall type which stops the motor with maximum
load. It may differ from the breakaway torque of bolt fastened by each tool.
4 Free Speed
It shows the standard free speed when a tool is run under free-load. Be aware that 14 Hex. size of Ratchet
some difference from the actual measured value may be seen since there is a
It shows the available width across flats on each ratchet wrench. Please specify
permissible range with standard for free speed, for each model. For grinder, the
Hex. size when ordering, since the hexagon socket for fastening is incorporated in
maximum free speed is indicated. For the maximum horse power for air motor
these models.
incorporated in a tool, it is generally obtained at speed around 1/2 of its free speed.
For selection of drill, please take note of this point. (Refer to P. 69.)
15 Hex. size of Gear socket
5 Overall Length It shows the available width across flats on each open-end wrench and geared
wrench. Please specify Hex. size when ordering, since the hexagon socket for
It shows the maximum length from the tip to the end of a tool. A small variation
fastening is incorporated in these models.
may be seen on an actual tool due to adjustment during the assembly process. Any
attachment such as socket, bit, grinding wheel, auger, snap, coupler for air supply
is not included. Suspension Ring is not included, either. 16 Hex. Size of Bit
It shows the inserting size of bit. Please refer to page 48 for suitable bit of each
6 Weight model.
It shows the weight of a tool. A small variation may be seen on an actual tool due to
adjustment during the assembly process. Any attachment such as socket, bit, 17 Capacity (Wheel Size)
grinding wheel, auger, snap, coupler for air supply is not included. It shows the available wheel dimensions for straight grinder, angle grinder, and
vertical grinder. Please use within prescribed wheel dimension, since the greatest
7 From Center to Outside wheel dimension is decided due to safety regulations.
It shows the distance from the center of rotation spindle (output spindle) to the
maximum outside diameter. For pistol-type model, Handle (grip part) nor a 18 Capacity (Pad/Paper Size)
projection for Suspension Ring is not included. For straight-type model, Valve Lever It shows the diameter of suitable pad/paper.
is not included.
19 Drilling Capacity
8 Sq. Drive or Hex. Size It shows the maximum diameter of drill which drill chuck mounted as standard can
It shows the shape and dimension of an output spindle. For oil-pulse wrench or fix.
impact wrench, the anvil is square drive type, and the dimension represents the
distance between two surfaces. (ex. 9.5Sq = square with 9.5mm, 25.4Sq = square
with 25.4mm) A model name suffixing D is for hex. bit inserting type, and the bit
inserting dimension is indicated. (ex. 6.35Hex = bit attaching spindle with 6.35mm)

9 Air Inlet Thread (Pipe Tap)

Is shows the nominal air inlet size for a pipe screw. In principle, the tool side has
got a female screw.

4 P OW E R TO O LS G E NE R AL C ATALO G
BOLT & NUT
SETTERS
BATTERY OIL-PULSE TOOLS

SUPER "INTELEC" SYSTEM CONTROLLER

SUPER "INTELEC" SYSTEM ELECTRIC OIL-PULSE TOOLS

SUPER "INTELEC" SYSTEM AMC・MC TOOLS

UAT・ULT・UL SERIES OIL-PULSE TOOLS

U・UX・UXR SERIES OIL-PULSE TOOLS

RATCHET WRENCHES

OPEN-END WRENCHES・GEARED WRENCHES

ANGLE NUTRUNNERS

IMPACT WRENCHES

FASTENING COUNTER WITH POKA-YOKE

NUTRUNNERS

POWER T OOLS G EN E R A L C ATA L O G 5

Uryu original technology
Features of Pulse Unit (PAT.)

Overwhelming Performance
with powerful !
BOLT & NUT SE T T E R S

New design with No springs helps to overcome challenges with

conventional pulse tools and ensures the maximum performance
of electric tool.

Long Life High Output High-efficiency

Durability improved Output increased Minimizes temperature increase!
by 400%! by 35%! No need to warm up before use!

Number of Pulse 65 61.5℃

10,000,000 PHOENIX Conventional Pulse Unit
35% 60
Conventional PHOENIX
Pulse Unit improved 55 14.4℃
8,000,000 decreased

Temperature (℃)
50
6,000,000 45
400％ UP
47.1℃
40
4,000,000 35
30
2,000,000
25
0 20
0 10 20 30 40 50 60 70 80 90 100
Conventional Pulse Unit PHOENIX (Number of Samples)

Pulse Counts until Pulse Maintenance Output Peak Value increased by 35% Heat Generation during fastening
increased 400% decreased by 30%

*Comparison with conventional pulse tool. Calculated under URYU test condition.
It varies depending on the usage condition.

Newly Developed Pulse Unit

Front Plate Rear Plate

Guide Pin

Driving Blade

Anvil

New Auto-Relief
Front Plate Side

Guide pins provided on one side of each driving blade are

Start connected to the 180°decentered guide (groove) on the rear/front
plate and oil inside the pulse unit and guide pins holds the driving
blades.
In addition, the driving blade is controlled on a regular track via
decentered guide (groove) and guide pin. One impulse per rotation
₄ Just after ₂ Before Pulsing can be made by sealing the pulse unit per rotation.
Pulsing

₃ During Pulsing

6 P OW E R TO O LS G E NE R AL C ATALO G
Features of Newly Developed Auto-Relief (PAT.)

High-quality Fastening Accuracy

with Ideal Waveform

BOLT & NUT SE T T E R S

Newly developed auto-relief (PAT.) makes the fastening possible with Fastening Waveform
smooth and ideal fastening waveform without being affected by oil
degradation.

(Rotation)

₃ During Pulsing
Cutaway View of Pressure
Regulator Valve Body

Center of Pressure
(Revolution) Regulator Valve Body
Center of Gravity

The center of gravity is offset from the center of

the pressure regulator valve by the notch.

₂ Before Pulsing ₄ Just after Pulsing

Notches created on the pressure regulator
valve body offsets the center of gravity, and
the rotational motion of the pulse and the
inertial force at blowing activate the auto-
relief. The notches on the pressure regulator
valve body become bypass for oil, and the
bypass is fully opened by centrifugal force
due to rotation (revolution) when not pulsing,
but the pressure regulator valve body rotates
due to inertia when pulsing, and shut off the
bypass unit. This new design makes the
fastening waveform ideal without torque
Start spike.
₅ After Pulsing

Newly Developed Small Torque & Angle Sensor

Strain Gauge

Small and power saving torque and angle sensor are employed for
battery-powered tool.
Torque measurement employs non-contact gauge type and angle
measurement employs ultra-slim encoder. Small, but strong against
Non-Contact
vibration and noise. Very reliable sensor.
Torque Board

Ultra-slim Encoder

POWER T OOLS G EN E R A L C ATA L O G 7

SELECTION CHART
Torque Accuracy
Elecrtic
Electric Drive / Drive Battery / Battery (all series with Shut-off)
∼±10% UBX-AF Series* P.12
Pneumatic Electric

∼±20% UBX-T Series P.13

BP-T Series P.14
RS
N U T SE T T E RS

Electric (all series with Shut-off)

～±10% UCX-AF Series P.21
B O LT & NUT

UDP-MC Series P.23

BOLT

Pneumatic Yes
Shut-off ～±10% UAAMC Series* P.28
UAMC Series P.30

∼±15% UXR-MC Series P.31

(Attention) The torque accuracy in this chart

is the guide line based on URYU's standard.
The selection of right models according to
the actual work standard is recommended. ∼±20% UAT Series P.32
UXR-T Series P.33
ULT Series P.35
*Torque control and angle monitoring function are
equipped on UBX-AF Series and UAAMC Series. No
～±30% UL Series P.34
U/UX/UXR Series P.35・36

TOOL SELECTION:
Fig. 1 Joint

100%

H-joint When selecting the tool for fastening operation, it is

Torque

neccesary to consider bolt size, fastening torque, working

S-joint
conditions and so on.
Generally, working conditions can be defined as hard joint
10% (H-joint) and soft joint (S-joint) from the aspect of relation
5% between fastening torque and angle. (Please refer to ISO-
27° Angle (degree) 5393:2017.) It is also necessary to consider charactaristics
＞324°
of work pieces.

Fig. 2 Fastening with Oil-Pulse Tool (H-S Joint) Fig. 3 Tool selection by work feature

TOOL-B H-joint

TOOL-B S-joint

S-joint
Torque
Torque

H-joint
TOOL-A S-joint

TOOL-A H-joint

Fastening Time Fastening Time

As shown above Fig. 2, torque output curve of the hard joint and soft When selecting the tool against the target torque of ★ as
joint is different when the same torque setting against same tool is shown Fig. 3, pay attention to the operating conditions (tool
applied. weight, fastening time), required torque accuracy, torque
(Difference of torque raise up speed and time to reach the target torque.) adjusting position of tools and select the most suitable
model.

8 P OW E R TO O LS G E NE R AL C ATALO G
BOLT & NUT SETTERS

TORQUE CHART FOR OIL-PULSE WRENCHES

Pistol Type Straight Type

ELECTRIC TOOL ( BATTERY )

●UBX-AF/UBX-T/BP-T series（P.12 - 16）

UBX-AF500Z
UBX-AF600Z
UBX-AF700Z
（RF8,Z）
UBX-T70 T70

BOLT & NUT SE T T E R S

（RF8,Z）
UBX-T80 T80
（RF8,Z,TK）T40D T40D
BP-T40 T40 （RF8,Z,TK）
BP-T50D T50D（RF8,Z,TK）
（RF8,Z,TK）
BP-T50 T50
（RF8,Z,TK）T60D T60D
BP-T60 T60 （RF8,Z,TK）

2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000
Torque【Nm】

ELECTRIC TOOL ( TRANSDUCERIZED TYPE )

●UCX-AF/UDP-MC series（P.21, 23）

UCX-AF600L
（TL）
UDP-A600LMC/
UCX-AF600
UDP-A700MC/（TL）
UCX-AF700
（TL）
UDP-A100MC/
（TL）
UDP-A120MC/
2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000
Torque【Nm】

AIR TOOL ( TRANSDUCERIZED TYPE )

●UAAMC series（P.28, 29）

UA400AMC
UA500AMC
UA600AMC
UA700AMC
UA800AMC
UA900AMC
UA1000AMC
UA1300AMC

2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000
Torque【Nm】

●UAMC series（P.30, 31）

UA40DMC UA40SDMC
UA40MC UA40SMC
UA50DMC UA50SDMC
UA50MC UA50SMC
UA60SDMC
UA60MC UA60SMC
UA70MC UA70SMC
UA80MC
UA90MC
UA100MC
UA130MC
UA150MC

2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000
Torque【Nm】

●UXR-MC series（P.31）

UXR-1820MC
UXR-2000MC
UXR-2400SMC

2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000
Torque【Nm】
POWER T OOLS G EN E R A L C ATA L O G 9
BOLT & NUT SETTERS

TORQUE CHART FOR OIL-PULSE WRENCHES

Pistol Type Straight Type Right Angle Type Angle Type

AIR TOOL ( SHUT-OFF TYPE )

●UAT series（P.32, 33）
ULT series（P.35）

UAT30D UAT30SD
ULT40C
UAT40 UAT40D UAT40S UAT40SD
UAT50 UAT50L UAT50D UAT50DL UAT50S UAT50SL UAT50SD UAT50SDL ULT50C ULT50CL
BOLT & NUT SE T T E R S

UAT60L UAT60DL UAT60SL UAT60SDL ULT60C ULT60CL

UAT60 UAT60D UAT60S UAT60SD
ULT70C ULT70CL
UAT70L
UAT70SL
UAT70
UAT70S ULT70CH ULT70CHL
UAT80L
UAT80
UAT90L
UAT90
UAT100L
UAT100
UAT130L
UAT130
UAT150L
UAT180L
UAT150
UAT180
UAT200L
UAT200

2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000
Torque【Nm】

●UXR-T series（P.33）

UXR-T2400S
UXR-T3000S

2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000
Torque【Nm】

AIR TOOL ( NON SHUT-OFF TYPE )

●UL series（P.34）

UL30 UL30S UL30D UL30SD

UL40D UL40SD
UL40 UL40S
UL50D UL50SD
UL50 UL50S UL60D UL60SD
UL60 UL60S
UL70
UL70S
UL80
UL90
UL100
UL130
UL150

2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000
Torque【Nm】

●U ／ UX ／ UXR series（P.35, 36）

U-310SD
U-350D U-350SD
UX-500C
UX-612C UX-612A
UX-700C
UX-800C
UX-ST800 UX-900C
UX-900S
UX-1000C
UX-1000S
UX-ST1000
UX-1300S
UXR-2000 UXR-2000S
UXR-2400S
UXR-3000S

2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000
Torque【Nm】
10 P OW E R TO O LS G E NE R AL C ATALO G
COMMUNICATION COORDINATOR

UCC SERIES
UCC-100Z

Multifunctional Coordinator with built-in Wireless unit

for UBX-AF Series
UCC SERIES SPECIFICATIONS

BOLT & NUT SE T T E R S

MODEL UCC-100Z
POWER SUPPLY AC 100-240V ±10%
POWER FREQUENCY 50/60 Hz
INSULATION PROTECTION DC500V over 10MΩ
POWER CONSUMPTION 35VA
WEIGHT 2.9kg
Without antenna 254(D)×222(W)×99(H) /
DIMENSIONS
With antenna 254(D)×233.5(W)×106(H)
Torque Control / Angle Monitoring /
MAIN FUNCTIONS Fastening Counter
Manual Input on LCD Panel /
PARAMETER SETUP Personal Computer (with setup software)
Torque Resolution ±2048 (12Bit A/D) LCD: 20
Characters×8 lines
DISPLAY Contents: TORQUE / WORK NO. / FASTENING
COUNT DOWN NO. / FASTENING TIME / PULSE
NO. / ANGLE / ERROR MESSAGE
COUNT LAMP: OK (Green) / NOK (Red)
LAMP FASTENING LAMP: LOW (Yellow) / OK (Green) /
HIGH (Red)
Operation Voltage / Current: DC24V / approx.
INPUT TERMINAL SIGNAL 10mA, 6 Terminals (free format)
Note: Contact input necessary
Contact Capacity: DC30V, 1A, 6 Terminals
OUTPUT TERMINAL SIGNAL (free format)
Setting PC Cable (Straight)
OPTION Part Number: 910-219-0
CODE (A/E) 81Z12/81Z02

UCC-100Z ＵＢＸ-ＡＦ Series

UCC-100Z Series System Layout

Hub

Front panel

Host computer LAN Cable

PC cable PC/Controller
Front panel Rear panel

Outlet
*2-Pin
PC for setup Power cable Conversion
Adapter must be
grounded.

Tool Tool

*2 UBX-AF tools can be paired to 1 UCC-100Z. Sequencer (PLC)

POWER T OOLS G EN E R A L C ATA L O G 11

BATTERY DRIVE BATTERY OIL-PULSE TOOLS

UBX-AF SERIES
Best Performance Battery Tools with Newly Developed
pulse, Auto-Relief and Torque & Angle Sensor
BOLT & NUT SE T T E R S

UBX-AF600Z UBX-AF700Z

UBX-AF500Z
* For information on the Radio Law in your country, please contact your nearest URYU distributor.

FEATURE
New design with No springs helps to overcome challenges with conventional pulse tools.
• More powerful
• Minimizes temperature increase
• No need to warm up before use

Improved Durability
Low oil pressure inside the pulse unit reduces the pressure against sealing, which minimizes oil leakage.

Newly designed Auto-Relief (PAT.) is not affected by oil degradation.

Upsized LED lamp enables

operators to judge OK/NOK
easily in any posture.

Pairing parameter is selectable from 3 types;

1. Manual Pairing by dip switches

2. Pairing through software
3. Wireless pairing

Fastening parameters are memorized in UCC-100Z coordinator.

Quick tool change only by pairing!

Specifications
Overall
Capacity Free Weight From Center Number Fastener
Length Sq. Drive Battery
(Nominal Torque Range Speed less to Outside Battery of
less Socket Shank Voltage
Model Bolt Size) (Approx.) (Approx.) Socket (Approx.) Model fastening quantity Code
(Capacity) (Panasonic) per full
per
mm in Nm ft-lbs min-1 mm in
with battery with no battery
mm in mm in minute * charge
kg lb kg lb
UBX-AF500Z 6-8 1/4-5/16 5.0-20.0 3.7-14.8 3600 219 8 5/8 1.82 4.01 1.52 3.35 29.5 1 5/32 9.5 3/8 10.8V(2.0Ah) EYFB32 11 440 12A12
UBX-AF600Z 8-10 5/16-3/8 15.0-40.0 11.1-29.6 4800 219 8 5/8 1.87 4.12 1.52 3.35 29.5 1 5/32 9.5 3/8 14.4V(2.0Ah) EYFB41 10 320 12A32
UBX-AF700Z 8-12 5/16-1/2 25.0-60.0 18.4-44.4 4800 219 8 5/8 1.91 4.21 1.56 3.44 29.5 1 5/32 9.5 3/8 14.4V(2.0Ah) EYFB41 9 320 12A52
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.
*Battery or Battery Charger is not included. Please use EY0L82 (Panasonic) for Battery Charger.
*Calculated under URYU test condition. It varies depending on the usage condition.

12 P OW E R TO O LS G E NE R AL C ATALO G
UBX-T SERIES [ SHUT-OFF TYPE ]
Premium Type Battery Oil-Pulse Tool with
Pulse Unit and Auto-Relief

BOLT & NUT SE T T E R S

UBX-T70 UBX-T70（RF8） UBX-T80

FEATURE
• Compact & Light weight, Low noise, Low vibration, Low reaction & Speedy fastening
• Shut-off reliability improved by diaphragm
• Incomplete Job Error Detection function (TK) is standardized.
• Double-hitting Detection: When a tool shuts off with 2 or less pulses, it is detected as the fastening NOK.

Wireless RF8 Type / Z(ZigBee) Type (*)

*For information on the Radio Law in your country, please contact your nearest URYU distributor.

RF8 : Pokayoke configuration Z(ZigBee) : Pokayoke configuration

Transmit / Herutu-made TW-800R-EXP or
Receive Transmit / Power adaptor
Transmit / Receive receiver TW-800R-EXS is Transmit / Receive Receive
TW-800R substitute.

Lighting pairing switch

Power
Switch
Fastener counter
Use UTM-1500.

Relay output exclusive cable assembly

Specifications (Shut-off Type) To UTM-1500 or PLC

Capacity Free Overall Length Weight From Center Number Fastener

Sq. Drive
(Nominal Torque Range Speed less Socket less to Outside Shank Battery Battery of
Model Bolt Size) (Approx.) (Approx.) Socket (Approx.) Voltage Model fastening quantity Code
per full
(Capacity) (Panasonic) per
mm in Nm ft-lbs min-1 mm in
with battery with no battery
mm in mm in minute * charge
kg lb kg lb
1.63 3.59 1.28 2.82 14.4V(2.0Ah) EYFB41 250
UBX-T70 8-12 5/16-1/2 25.0-55.0 18.5-40.7 4800 187 7 23/64 27.5 1 3/32 9.5 3/8 8 12F02
1.86 4.10 1.28 2.82 14.4V(4.2Ah) EYFB42 600
1.63 3.59 1.28 2.82 14.4V(2.0Ah) EYFB41 250
UBX-T70(RF8) 8-12 5/16-1/2 25.0-55.0 18.5-40.7 4800 193 7 19/32 27.5 1 3/32 9.5 3/8 8 12F22
1.86 4.10 1.28 2.82 14.4V(4.2Ah) EYFB42 600
1.63 3.59 1.28 2.82 14.4V(2.0Ah) EYFB41 250
UBX-T70(Z) 8-12 5/16-1/2 25.0-55.0 18.5-40.7 4800 204 8 1/32 27.5 1 3/32 9.5 3/8 8 12F32
1.86 4.10 1.28 2.82 14.4V(4.2Ah) EYFB42 600
UBX-T80 10-12 3/8-1/2 35.0-65.0 25.9-48.1 4800 193 7 19/32 1.89 4.16 1.40 3.08 27.5 1 3/32 9.5 3/8 18.0V(3.0Ah) EY9L53 5 250 12F52
UBX-T80(RF8) 10-12 3/8-1/2 35.0-65.0 25.9-48.1 4800 199 7 53/64 1.89 4.16 1.40 3.08 27.5 1 3/32 9.5 3/8 18.0V(3.0Ah) EY9L53 5 250 12F72
UBX-T80(Z) 10-12 3/8-1/2 35.0-65.0 25.9-48.1 4800 210 8 17/64 1.89 4.16 1.40 3.08 27.5 1 3/32 9.5 3/8 18.0V(3.0Ah) EY9L53 5 250 12F82
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.
*Battery or Battery Charger is not included. Please use EY0L82 (Panasonic) for Battery Charger.
*Calculated under URYU test condition. It varies depending on the usage condition.

OPTION
Optional Tool Jackets
Part Number Used for Part Number Used for
12F-840-0 UBX-T70 12F-840-5 UBX-T80
12F-840-1 UBX-T70(RF8) 12F-840-6 UBX-T80(RF8)
12F-840-3 UBX-T70(Z) 12F-840-8 UBX-T80(Z)

POWER T OOLS G EN E R A L C ATA L O G 13

BATTERY DRIVE BATTERY OIL-PULSE TOOLS

BP-T SERIES [ SHUT-OFF TYPE ]

Evolving Battery Oil Pulse Tool BP-T series
BOLT & NUT SE T T E R S

BP-T40D BP-T50D BP-T60D BP-T60

FEATURES
• New grip style in terms of operator’
s comfort. It protects operator from fatigue.
• Independent cooling fan reduces heat of pulse unit contributing to comfortable operation.
• Compact & High-capacity Li-ion battery provides more fasteners per charge.

Quick-change driver anvil type

On pulling the sleeve, insert or take
off the bit.
9mm

The model name suffixing (D) is

6.35mm the Quick-change driver anvil type.

Specifications (Shut-off Type)

Free Overall Length
Capacity Weight From Center Sq. Drive
less
Battery Number
(Nominal Torque Range Speed Socket less to Outside or Battery of Fastener
Bolt Size) or Bit (Approx.) Hex. Size fastening quantity
Model (Approx.) Socket or Bit Voltage Model Code
(Approx.)
(Panasonic) minute * per
(Capacity) per full
with battery with no battery charge
mm in Nm ft-lbs min-1 mm in mm in mm in
kg lb kg lb
BP-T40D 5 No. 10 4.5-8 3.3-5.9 3300 200 7 7/8 1.45 3.19 1.15 2.53 27 1 1/16 6.35 1/4 10.8V (2.0Ah) EYFB32 11 1000 10A02
BP-T50D 6-8 1/4-5/16 6.5-13 4.8-9.6 3900 200 7 7/8 1.45 3.19 1.15 2.53 27 1 1/16 6.35 1/4 10.8V (2.0Ah) EYFB32 7 700 10C02
BP-T60D 8 5/16 13-26 9.6-19.2 4800 205 8 5/64 1.60 3.52 1.25 2.75 27 1 1/16 6.35 1/4 14.4V (2.0Ah) EYFB41 7 600 10E02
BP-T40 5 No. 10 4.5-8 3.3-5.9 3300 197 7 4/3 1.45 3.19 1.15 2.53 27 1 1/16 9.5 3/8 10.8V (2.0Ah) EYFB32 11 1000 10A12
BP-T50 6-8 1/4-5/16 7-15 5.1-11.1 3900 197 7 4/3 1.45 3.19 1.15 2.53 27 1 1/16 9.5 3/8 10.8V (2.0Ah) EYFB32 7 700 10C12
BP-T60 8 5/16 13-26 9.6-19.2 4800 202 7 61/64 1.60 3.52 1.25 2.75 27 1 1/16 9.5 3/8 14.4V (2.0Ah) EYFB41 7 600 10E12
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.
*Battery or Battery Charger is not included. Please use EY0L82 (Panasonic) for Battery Charger.
*Calculated under URYU test condition. It varies depending on the usage condition.

OPTION
Protector
Optional Tool Jackets
Size Part Number Used for
S
10C-840-1 BP-T40(D), BP-T50(D)
S 10C-840-4 BP-T40(D)(RF8)/(TK), BP-T50(D)(RF8)/(TK)
10D-840-2 BP-T40(D)(Z), BP-T50(D)(Z)
M 10E-840-1 BP-T60(D)
M 10E-840-4 BP-T60(D)(RF8)/(TK)
10F-840-2 BP-T60(D)(Z)

14 P OW E R TO O LS G E NE R AL C ATALO G
BATTERY DRIVE BATTERY OIL-PULSE TOOLS

DERIVATIVE MODELS OF BP-T SERIES [ SHUT-OFF TYPE ]

Wireless RF8 Type / Z(ZigBee) Type (*)

*For information on the Radio Law in your country, please contact your nearest URYU distributor.

RF8 : Pokayoke configuration

Transmit / Receive Transmit / Receive
TW-800R-EXP or
Herutu-made TW-800R-EXS is

BOLT & NUT SE T T E R S

receiver substitute.
TW-800R

Lighting pairing switch

Power
Switch

Fastener counter
Use UTM-1500.

Z(ZigBee) : Pokayoke configuration

Power adaptor
Transmit / Receive Transmit / Receive

Relay output exclusive cable assembly

To UTM-1500 or PLC
Specifications (Shut-off Type)
Free Overall Length From
Capacity Weight Sq. Drive Number Fastener
less Center
(Nominal Torque Range Speed Socket less or Battery Battery of
or Bit to Outside
Model Bolt Size) (Approx.) (Approx.) Socket or Bit Hex. Size Voltage Model fastening quantity
(Approx.)
(Capacity) (Panasonic) per full Code
per
mm in Nm ft-lbs min-1 mm in
with battery with no battery
mm in mm in minute * charge
kg lb kg lb
BP-T40D(RF8) 5 No. 10 4.5-8 3.3-5.9 3300 207 8 5/32 1.45 3.19 1.15 2.53 27 1 1/16 6.35 1/4 10.8V (2.0Ah) EYFB32 11 1000 10A62
BP-T50D(RF8) 6-8 1/4-5/16 6.5-13 4.8-9.6 3900 207 8 5/32 1.45 3.19 1.15 2.53 27 1 1/16 6.35 1/4 10.8V (2.0Ah) EYFB32 7 700 10C62
BP-T60D(RF8) 8 5/16 13-26 9.6-19.2 4800 212 8 11/32 1.60 3.52 1.25 2.75 27 1 1/16 6.35 1/4 14.4V (2.0Ah) EYFB41 7 600 10E62
BP-T40(RF8) 5 No. 10 4.5-8 3.3-5.9 3300 204 8 1/32 1.45 3.19 1.15 2.53 27 1 1/16 9.5 3/8 10.8V (2.0Ah) EYFB32 11 1000 10A72
BP-T50(RF8) 6-8 1/4-5/16 7-15 5.1-11.1 3900 204 8 1/32 1.45 3.19 1.15 2.53 27 1 1/16 9.5 3/8 10.8V (2.0Ah) EYFB32 7 700 10C72
BP-T60(RF8) 8 5/16 13-26 9.6-19.2 4800 209 8 15/64 1.60 3.52 1.25 2.75 27 1 1/16 9.5 3/8 14.4V (2.0Ah) EYFB41 7 600 10E72
BP-T40D(Z) 5 No. 10 4.5-8 3.3-5.9 3300 218 8 37/64 1.45 3.19 1.15 2.53 27 1 1/16 6.35 1/4 10.8V (2.0Ah) EYFB32 11 1000 10B12
BP-T50D(Z) 6-8 1/4-5/16 6.5-13 4.8-9.6 3900 218 8 37/64 1.45 3.19 1.15 2.53 27 1 1/16 6.35 1/4 10.8V (2.0Ah) EYFB32 7 700 10D12
BP-T60D(Z) 8 5/16 13-26 9.6-19.2 4800 223 8 25/32 1.60 3.52 1.25 2.75 27 1 1/16 6.35 1/4 14.4V (2.0Ah) EYFB41 7 600 10F12
BP-T40(Z) 5 No. 10 4.5-8 3.3-5.9 3300 215 8 15/32 1.45 3.19 1.15 2.53 27 1 1/16 9.5 3/8 10.8V (2.0Ah) EYFB32 11 1000 10B22
BP-T50(Z) 6-8 1/4-5/16 7-15 5.1-11.1 3900 215 8 15/32 1.45 3.19 1.15 2.53 27 1 1/16 9.5 3/8 10.8V (2.0Ah) EYFB32 7 700 10D22
BP-T60(Z) 8 5/16 13-26 9.6-19.2 4800 220 8 21/32 1.60 3.52 1.25 2.75 27 1 1/16 9.5 3/8 14.4V (2.0Ah) EYFB41 7 600 10F22
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.
*Battery or Battery Charger is not included. Please use EY0L82 (Panasonic) for Battery Charger.
*Calculated under URYU test condition. It varies depending on the usage condition.

POWER T OOLS G EN E R A L C ATA L O G 15

BATTERY DRIVE BATTERY OIL-PULSE TOOLS

BP-T SERIES [ SHUT-OFF TYPE ]

Incomplete Job Detection (TK) Type

LED with red lighting tells you incomplete job (premature trigger off)
BOLT & NUT SE T T E R S

FEATURES
• Squeeze trigger, and shut-off information LED will light red.
• Switch off the trigger before automatic shut-off, and the LED will continue
lighting red for 3 seconds and go out.
• The LED lights green with 1 pulse buzzer sounding for automatic shut-off.

(Note) Automatic shut-off by retry repairing incomplete job error will light LED by
switching green and red together.

BP-T60D（TK）

Quick-change driver anvil type

On pulling the sleeve, insert or
take off the bit.
9mm

The model name suffixing (D) is

the Quick-change driver anvil type.
6.35mm

Specifications (Shut-off Type)

Free Overall Length From
Capacity Weight Sq. Drive Number Fastener
less Center
(Nominal Torque Range Speed Socket less or Battery Battery of
or Bit to Outside
Model Bolt Size) (Approx.) (Approx.) Socket or Bit Hex. Size Voltage Model fastening quantity
(Approx.)
(Capacity) (Panasonic) per full Code
per
mm in Nm ft-lbs min-1 mm in
with battery with no battery
mm in mm in minute * charge
kg lb kg lb
BP-T40D(TK) 5 No. 10 4.5-8 3.3-5.9 3300 207 8 5/32 1.45 3.19 1.15 2.53 27 1 1/16 6.35 1/4 10.8V (2.0Ah) EYFB32 11 1000 10A82
BP-T50D(TK) 6-8 1/4-5/16 6.5-13 4.8-9.6 3900 207 8 5/32 1.45 3.19 1.15 2.53 27 1 1/16 6.35 1/4 10.8V (2.0Ah) EYFB32 7 700 10C82
BP-T60D(TK) 8 5/16 13-26 9.6-19.2 4800 212 8 11/32 1.60 3.52 1.25 2.75 27 1 1/16 6.35 1/4 14.4V (2.0Ah) EYFB41 7 600 10E82
BP-T40(TK) 5 No. 10 4.5-8 3.3-5.9 3300 204 8 1/32 1.45 3.19 1.15 2.53 27 1 1/16 9.5 3/8 10.8V (2.0Ah) EYFB32 11 1000 10A92
BP-T50(TK) 6-8 1/4-5/16 7-15 5.1-11.1 3900 204 8 1/32 1.45 3.19 1.15 2.53 27 1 1/16 9.5 3/8 10.8V (2.0Ah) EYFB32 7 700 10C92
BP-T60(TK) 8 5/16 13-26 9.6-19.2 4800 209 8 15/64 1.60 3.52 1.25 2.75 27 1 1/16 9.5 3/8 14.4V (2.0Ah) EYFB41 7 600 10E92
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.
*Battery or Battery Charger is not included. Please use EY0L82 (Panasonic) for Battery Charger.
*Calculated under URYU test condition. It varies depending on the usage condition.

16 P OW E R TO O LS G E NE R AL C ATALO G
OIL FILLER FOR PULSE UNIT

BOLT & NUT SE T T E R S

G-25SA

UOF-2

Vacuum Pump Oil Filler Oil Fluid Q'ty Part Number

Hyrando Jinen TX46 20L 998-735-0

FEATURES
The new UOF-2 eliminates troublesome process of oil-filling procedure repeated at previous model UOF-1 due to employment of the powerful
vacuuming system.
Use Hyrando Jinen TX46 and do not substitute any other fluid.

You can choose the Oil Filler from the below choices.
Part Number Description
878-945-1 Complete Set for Oil Filler (with Vacuum Pump and Oil Filler Tank)
878-955-1 Oil Filler without Vacuum Pump

POWER T OOLS G EN E R A L C ATA L O G 17

MEMO

18 P OW E R TO O LS G E NE R AL C ATALO G
Oil Pulse Wrenches

Electric control system

SUPER "INTELEC" SERIES
URYU Electric control system series running with more

BOLT & NUT SE T T E R S

precise control meets a scene requiring accurate and
delicate control.

POINT Control a tool easily by a POINT Function on setup software

1 controller. 2 with PC.

・ Programming is easy on front panel. You can also upload ・Transmit and receive setting values
your program from PC. (The exclusive setup software is ・Receive and store fastening results
necessary)
・Receive and store waveform data
・ Counting a number of fastener and various error detection
・Receive and store statistical data
functions are equipped.
・I / O check
・ Controller meets various work condition, maximum 16
different kinds works can be set. (maximum 8 different
kinds works for UECP-4900 & UEC-5500)
・ A fastening number and a pulse number can be
controlled.
・ Fastening torque result and torque waveform can be
shown.
・ Standard deviations, Cp value, Cpk value can be analyzed
instantly from the stored data within the controller and
you can graph the statistical data.
・ Check of Input/Output and display of errors can be
confirmed with beep sound and display on PC or Front
panel of controller. (For touch panel type only)

POINT POINT
3 Self-checking function
4 Ethernet (TCP/IP) capable

When the power turns on, self-checking function ・ When the dedicated setup software is installed to PC,
automatically runs as ROM→RAM→A/D→ setting parameters can be transmitted and received
Filter Check→ZERO CAL Check and etc. between controller and PC, fastening result/waveform
data can be received from controller.
・ When a controller is connected with a host computer
to control an assembly line, the controller receive a
fastening instruction from the host computer and
return the fastening result with the instruction to host
computer.

Tool UBX-AF UCX-AF UDP-MC UAAMC UAMC UXR-MC

SERIES SERIES SERIES SERIES SERIES SERIES
Controller ▶P.12 ▶P.21 ▶P.23 ▶P.28 ▶P.30 ▶P.31

UECP-4900 SERIES ▶P.20 — ● — — — —

UECP-4811 SERIES ▶P.22 — — ● — — —

UEC-4801 SERIES ▶P.25 — — — ● ● ●

UEC-5500 SERIES ▶P.26 *● — — — ● ●

*URYU UZig01 coordinator is required.

POWER T OOLS G EN E R A L C ATA L O G 19

SUPER “INTELEC” SYSTEM CONTROLLER

UECP SERIES
UECP-4900

Multifunction Controller to drive and control UCX-AF series

UECP SERIES SPECIFICATIONS
MODEL UECP-4900A UECP-4900E
BOLT & NUT SE T T E R S

POWER SUPPLY AC100-115V AC230V

POWER FREQUENCY 50 / 60 Hz
INSULATION PROTECTION DC500V over 10MΩ
AMBIENT TEMPERATURE 0〜50℃ (non-freezing)
AMBIENT HUMIDITY Under 85% RH (no dew)
WEIGHT 4.2 kg 11.0 kg
DIMENSIONS 303 (D) × 220 (W) × 146.5 (H) 303 (D) × 220 (W) × 213.5 (H)
MAIN FUNCTIONS Torque Control / Angle Monitoring / Fastening Counter
Manual Input on Front Touch Panel /
PARAMETER SETUP Personal Computer (with setup software)
DISPLAY 3.5-inch LCD (320×240 dot) Touch panel TFT color
Operation Voltage / Current: DC24V /
INPUT TERMINAL SIGNAL approx. 10mA (NPN ⇔ PNP changeable),
6 Terminals (free format) Note: Contact input necessary
*Joint Cable Assembly is necessary to connect a UCX-AF tool with controller.
910-727-0: 5M / 910-728-0: 10M OUTPUT TERMINAL SIGNAL Contact Capacity: DC30V, 1A, 6 Terminals (free format)
Setting PC Cable (Straight)
OPTION Part Number : 910-219-0
UECP-4900 UCX-AF Series CODE (A/E) 81932 81942

UECP-4900A UECP-4900E

UECP-4900 Series System Layout

Hub

Host computer LAN Cable

Front panel Rear panel

PC cable PC/Controller

Outlet
*2-Pin
PC for setup Power cable Conversion
Adapter must be
grounded.

Joint Cable Assembly

Tool

Sequencer (PLC)

20 P OW E R TO O LS G E NE R AL C ATALO G
SUPER “INTELEC” SYSTEM ELECTRIC OIL-PULSE TOOLS

UCX-AF SERIES
Further evolved Electric Oil-Pulse Tool with
pulse

BOLT & NUT SE T T E R S

UCX-AF600L

UCX-AF600
UCX-AF700

FEATURES
• Newly developed Phoenix pulse increases output and improves durability.
• More compact and lightweight compared with conventional model
• Increased number of fastening per minute by improved cooling effect
• UCX-AF series are capable of monitoring fastening angle with the equipped ultra-slim Encoder.

SPECIFICATIONS
Weight Number
Free Overall Length From Center
Capacity less Sq. Drive of
Torque Range Speed less Socket to Outside
Model (Nominal Bolt Size) Socket Shank fastening Code
(Approx.) (Approx.) (Approx.)
(Approx.) per
mm in Nm ft-lbs min-1 mm in kg lb mm in mm in minute*
UCX-AF600L 5-8 No.10-5/16 4.0-20.0 3.0-14.8 4800 203 7 63/64 1.50 3.31 27.5 1 5/64 9.5 3/8 12 12U02
UCX-AF600 6-10 1/4-3/8 10.0-40.0 7.4-29.6 4800 203 7 63/64 1.50 3.31 27.5 1 5/64 9.5 3/8 10 12U12
UCX-AF700 8-12 5/16-1/2 20.0-60.0 14.8-44.4 4800 203 7 63/64 1.55 3.42 27.5 1 5/64 9.5 3/8 9 12U22
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.
*Calculated under URYU test condition. It varies depending on the usage condition.

POWER T OOLS G EN E R A L C ATA L O G 21

SUPER “INTELEC” SYSTEM CONTROLLER

UECP SERIES
The UECP series Controller becomes one unit combined driver
unit to drive UDP-MC series electric oil pulse tools and multi-
function controller of UEC-4811 to control a transducerized tool.
UECP SERIES SPECIFICATIONS
BOLT & NUT SE T T E R S

POWER SUPPLY UECP-4811A: AC115V UECP-4811E: AC230V

POWER FREQUENCY 50 / 60 Hz
NOISE PROTECTION 1000V 1μS (accoding to noise simulator)
INSULATION PROTECTION DC500V over 10MΩ
AMBIENT TEMPERATURE 0〜50℃ (non-freezing)
AMBIENT HUMIDITY 90% RH or less (no dew)
WEIGHT 11.30 kg
DIMENSIONS 265 (D) × 222 (W) × 200 (H)
MAIN FUNCTIONS Torque control, Fastener number count
Manual input on front LCD panel
PARAMETER SETUP
By PC (with setup software)
Torque resolution ±2048 (12 bit by A/D use)
LCD type
LCD ( 20 letters × 4 lines )
Work number, Bolt count number, Tightening
DISPLAY time and Pulse blow number
1-digit Digital Display (DPM)
Work number displayed
4-digit Digital Display (DPM)
Torque reading displayed
Total Lamp (for Count Judgment) :
OK (green) / NOK (red)
LED
Torque Lamp (for Torque Judgment) :
LOW (yellow) / OK (green) / HIGH (red)
*Joint Cable Assembly is necessary to connect tool with controller
For UDP-A600LMC・A700MC・A100MC 910-807-0: 5M / Operation Voltage/Current : DC24V / about 10mA
INPUT TERMINAL SIGNAL 6 terminals available (programmable)
910-808-0: 10M / 910-809-0: 15M / 910-810-0: 20M Note: Contact input necessary
For UDP-A120MC 910-567-0: 5M / 910-568-0: 10M /
910-569-0: 15M / 910-625-0: 20M Contact Capacity : DC30V, 1A
OUTPUT TERMINAL SIGNAL 6 terminals available (programmable), VALVE
Setting PC Cable (Straight)
OPTION Part Number : 910-219-0
UECP-4811 UDP-A600LMC・A700MC・A100MC・A120MC Series CODE (A/E) 81972/81982

UECP Series System Layout

Hub

Host computer LAN Cable

Front panel Rear panel

PC cable PC/Controller

Outlet
*2-Pin
PC for setup Power cable Conversion
Adapter must be
grounded.

Joint Cable Assembly

Tool

Sequencer (PLC)

22 P OW E R TO O LS G E NE R AL C ATALO G
ELECTRIC DRIVE SUPER “INTELEC” SYSTEM ELECTRIC OIL-PULSE TOOLS

UDP-MC SERIES
Exquisite Range of Torque.
Fastening with high efficiency & high accuracy.
New Function: Double hitting error detection function
available.

BOLT & NUT SE T T E R S

External start signal available for
multi-purpose usage.

UDP-A100MC
UDP-A600LMC
UDP-A120MC

UDP-A700MC

Top Load Type

UDP-A600LMC（TL）

FEATURES
• URYU’ s unique non-contact Magnetostrictive transducer [FUNCTIONS]
incorporated. • Motor speed/current is programmable.
• The UDP tool is driven by commercial electricity. This
・ Motor current can be set in 4 steps
helps you build an assembly line easily and adjust it
flexibly to the layout change. ・ Motor rotational speed can be set in 100 min-1 increments(by the 2-step
fastening, torque spike at bolt seating is inhibited, and make it possible
• High Power and High efficiency adopted by IPM motor.
to cover the wider torque range.)
(except for A100MC/A120MC)
• The functions of various fastening error detections and fastener number
• Cooling fan is activated automatically when pulling the
count down assure your operations.
throttle trigger, which contributes to heat reduction and
increase number of fastening. • Makes setup or changeover of fastening torque and fastening number
count.
• The intelligence of UDP-MC tool stops operation
immediately to protect the operator from the failure • Tool’
s maintenance is possible by counting both total cycle numbers(how
including overloaded operation, short circuit, and broken many fasteners) and/or total pulse numbers.
wire, which minimizes the possible influence over operator • Input/Output check and error messages can be checked from your PC
and shop floor. screen or the front panel of UECP Series with buzzer sounding.
• Can set up and monitor various control values and setting values either on
the front panel or on your PC screen.
• Ethernet(TCP/IP) capable. Upload and receipt of the setting values, upload
of the fastening result/waveform data through PC software.
Electric Oil-Pulse Tool UDP-MC Series
Free Overall Weight less From Center
Capacity Sq. Drive
Torque Range Speed Length Socket to Outside Code
Model (Nominal Bolt Size) Shank
(Approx.) (Approx.) (Approx.) (Approx.)

mm in Nm ft-lbs min-1 mm in kg lb mm in mm in Standard TL

UDP-A600LMC, (TL) 5-6 No.10-1/4 4.0-20.0 3.0-14.8 4800 214 8 27/64 1.53 3.37 29.5 1 5/32 9.5 3/8 07452 07459
UDP-A700MC, (TL) 8-12 5/16-1/2 10.0-50.0 7.4-37.0 4800 242 9 33/64 1.78 3.92 29.5 1 5/32 9.5 3/8 07332 07339
UDP-A100MC, (TL) 10-12 3/8-1/2 45.0-100.0 33.3-74.0 4800 248 9 49/64 2.85 6.27 34.5 1 23/64 12.7 1/2 07382 07389
UDP-A120MC, (TL) 12-14 3/8-1/2 55.0-120.0 40.5-88.4 4800 248 9 49/64 2.85 6.27 34.5 1 23/64 12.7 1/2 07402 07409
Model name with “TL” is top load type.
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.

POWER T OOLS G EN E R A L C ATA L O G 23

SUPER “INTELEC” SYSTEM CONTROLLER

UEC SERIES (Single Spindle Connection)

UEC-4800TP（SD）/ UEC-4800TP（SD-ANGLE）

The Touch Panel type visualizes all fastening results.

FEATURES
• Ethernet(TCP/IP) capable.
BOLT & NUT SE T T E R S

• You can see Torque Wave data on both front touch panel and PC.
【Top Screen】【Wave form Screen】

• You can detect various fastening errors and control the job with fastening
counter.
• UEC-4800TPA/E(SD) Series can be used for 16 different fastening
applications.
• Front panel, PC display or buzzer will tell you Input/Output(terminal blocks
& tool wiring) checks and errors.
• UEC-4800TPA/E(SD) Series memorizes max. 4,550 fastening data(max. 1,900
fastening data when ID data is included). Standard deviations, Cp value,
Cpk value can be analyzed instantly from the stored data within the
controller. When you connect UEC-4800TPA/E(SD) Series to PC, you can
graph the statistical data.
• By using Input/Output terminals UEC-4800TPA/E(SD) Series can be
interlocked with the production line.

UEC-4801 / UEC-4801（ANGLE）

Cost-Effective LCD-Panel Available

FEATURES
• LCD-Panel type is available for more cost effective.
• Setting parameters can be put into the controller on the front panel as well
as PC.

[FUNCTIONS]
• You can see Torque Wave data on PC connected to LCD-Panel type.

*The other features and functions are the same from UEC-4800TPA/E(SD) and UEC-
4800TPA/E(SD-ANGLE).

24 P OW E R TO O LS G E NE R AL C ATALO G
SPECIFICATIONS
Models UEC-4800TPA/E（SD） UEC-4800TPA/E（SD-ANGLE） UEC-4801A/E UEC-4801A/E（ANGLE）
POWER SUPPLY AC100〜240V ±10% AC100～240V ±10%
POWER FREQUENCY 50/60 Hz 50/60 Hz
NOISE PROTECTION 1000V 1μS (according to noise simulator) 1000V 1μS (according to noise simulator)
INSULATION PROTECTION DC500V over 10MΩ DC500V over 10MΩ
AMBIENT TEMPERATURE 0〜50℃ (non-freezing) 0～50℃ (non-freezing)
AMBIENT HUMIDITY Under 90%RH (no dew) Under 90%RH (no dew)

BOLT & NUT SE T T E R S

POWER CONSUMPTION Approx. 30VA Approx. 30VA
WEIGHT Approx. 3.6 kg Approx. 3.6 kg
DIMENSIONS 265(D) x 222(W) x 120(H) 265(D) x 222(W) x 120(H)
MAIN FUNCTIONS Torque Control + Fastening Counter Torque Control + Fastening Counter
ANGLE MONITORING — ○ — ○
Manual Input on Front Touch Pannel Manual Input on Front LCD Panel
PARAMETER SETUP
Personal Computer (with setup software) Personal Computer (with setup software)
Torque Resolution ±2048 (12Bit A/D)
LCD : 20 characters x 4 lines
Torque Resolution ±2048 (12Bit A/D) Contents : WORK NO. / FASTENING COUNT
DISPLAY 320 x 240 dot 25 characters x 15 lines DOWN NO. / FASTENING TIME / PULSE NO.
1-digit digital display (DPM) : WORK NO.
4-digit digital display (DPM) : TORQUE
COUNT Lamp : OK (Green) / NOK (Red) COUNT Lamp : OK (Green) / NOK (Red)
LED
TORQUE Lamp : LOW (Yellow) / OK (Green) /HIGH (RED) TORQUE Lamp : LOW (Yellow) / OK (Green) / HIGH (RED)
INPUT TERMINAL Operation Voltage/Current : DC24V/aprox. 10mA Operation Voltage/Current : DC24V/aprox. 10mA
SIGNAL 6 terminals (free format), VALVE 6 terminals (free format), VALVE
OUTPUT TERMINAL Contact Capacity : AC:125V, 0.3A, DC:30V, 1A Contact Capacity : AC:125V, 0.3A, DC:30V, 1A
SIGNAL 6 terminals (free format), VALVE 6 terminals (free format), VALVE
OPTION Setting PC Cable (Straight) Part Number : 910-219-0
CODE (A/E) 81662/81672 81832/81842 81B42/81B52 81C42/81C52

Used with
Magnetostrictive Sensor UAAMC Series / UAMC Series / UXR-MC Series
Pulse Wrench

Strain-Gauge Sensor UAN-RM Series

Pneumatic Nutrunner

UEC-4801 Series System Layout

LAN

Hub

LAN Cable

Rear side of UEC

PC / Printer etc.

Power Cable

Receptacle

Torque Sensor Cable

PLC

Serial Printer Sequencer (PLC) PC

Tool

POWER T OOLS G EN E R A L C ATA L O G 25

SUPER “INTELEC” SYSTEM CONTROLLER

UEC SERIES (Multi Spindle Connection)

UEC-5500

Multi-function controller which can control 4-spindles simultaneously.

UEC-5500 controls various error detections, the number of fasteners and
pulse numbers for 4 different tools in one controller.
BOLT & NUT SE T T E R S

Used with
Magnetostrictive Sensor UAMC Series / UXR-MC Series
Pulse Wrench

Strain-Gauge Sensor UAN-RM Series

Pneumatic Nutrunner

*Key Pad (910-208-0) and Key Pad Cable (910-206-0) are optional items,
so please purchase them separately.

FEATURES
• UEC-5500 can control max. 4 different transducerized tools [FUNCTIONS]
simultaneously. • You can choose between Torque Control and Monitor. You can
• UEC-5500 can be used with various type of transducerized tools. detect various errors and control the job with fastening counter.
Oil-Pulse Tools fitted with a brushless type Magnetostrictive • You can see‘ Torque wave Data’on PC.
Transducer. • Makes setup or changeover of fastening torque and fastening
UAMC Series, UXR-MC Series number count for 8 different fastening applications.
Pneumatic Nutrunners fitted with a Strain-Gauged Transducer. • Input/Output check and error messages can be checked from your
UAN-RM Series PC screen or the front panel of UEC-5500 with buzzer sounding.
• High Reliable Torque Control & Monitor. • For Oil-Pulse Tools, tool maintenance can be determined by the
total numbers of fasteners as well as total pulse numbers.
• Easy Programming with a Removable Key Pad. You can also
upload the fastening programmes from PC. • UEC-5500 memorizes max. 20,000 fastening data per spindle. By
connecting to PC, you can download the stored data to your PC
• Ethernet(TCP/IP) capable.
for statistical analysis of mean, σ, 3σ/ mean, CP, and CPK. You
can also graph the statistical data.
• By using Input / Output terminals UEC-5500 can be interlocked
with the production line.

26 P OW E R TO O LS G E NE R AL C ATALO G
UEC-5500A/E SPECIFICATIONS
POWER SUPPLY AC100〜240V ±10%
POWER FREQUENCY 50 / 60 Hz
NOISE PROTECTION 1000V 1μS (according to noise simulator)
INSULATION PROTECTION DC500V over 10MΩ
AMBIENT TEMPERATURE 0〜50℃ (non-freezing)

BOLT & NUT SE T T E R S

AMBIENT HUMIDITY Under 90%RH (no dew)
POWER CONSUMPTION Approx. 50VA
WEIGHT Approx. 3.6 kg
DIMENSIONS 240(D) × 270(W) × 115(H)
MAIN FUNCTIONS Torque Monitoring / Control + Fastening Counter
Removable Key Pad
PARAMETER SETUP
Personal Computer (with setup software)
Torque Resolution ±2048 (12Bit A/D)
4-digit digital display : TORQUE
DISPLAY 2-digit digital display : FASTENING COUNT DOWN NO.
1-digit digital display (small) × 4 : WORK NO.
1-digit digital display (large) × 4 : SPINDLE NO.
Each Spindle's COUNT Lamp : OK (Green) / NOK (Red)
LED
TORQUE Lamp : LOW (Yellow) / OK (Green) / HIGH (RED)
Drive by Electric Current Input (Photo Coupler Insulation)
INPUT TERMINAL SIGNAL Voltage : DC24V Insulation Resistance : 4.7KΩ
12 terminals (free format)
Contact Capacity : AC:125V, 0.3A, DC:30V, 1A
OUTPUT TERMINAL SIGNAL
8 terminals (free format), VALVE, +24V
OPTION Setting PC Cable(Straight) Part Number : 910-219-0
CODE (A/E) 83272/83292

UEC-5500 System Layout

Hub

LAN Cable

PC etc.
Key Pad Cable
UEC-5500 Front Side UEC-5500 Rear Side

Key Pad Setting PC Cable

Power Cable Receptacle
*2-Pin Conversion
adaptor must be
grounded.

Sensor Cable Assembly

Tool
Sequencer (PLC)

POWER T OOLS G EN E R A L C ATA L O G 27

PNEUMATIC SUPER “INTELEC” SYSTEM UAAMC TOOLS

UAAMC SERIES
Various fastening errors such as double-hit, cross-
thread, foreign objects insertion are detectable.
Fastening quality improved by angle monitoring
function provides you with enhanced reliability.
BOLT & NUT SE T T E R S

UA500AMC UA600AMC

UA400AMC

UA700AMC UA1300AMC

FEATURES
• UAAMC series are capable of angle monitoring in addition to the torque control/monitoring from UAMC series.
It enables you to get double-hit, cross-thread, foreign object insertion and so forth by angle monitoring, and improve the fastening quality.

Foreign object
Inserted

Double-Tightening : Stripped Thread/Seized Thread :

Detectable as the torque Detectable as the torque does not
increases, while the free run increase and the fastening angle gets
Good Double-Tightening angle lacks. Stripped Thread too high.
・Free Run Angle NG ・Angle NG

Foreign object
Inserted
Cross Thread : Foreign Object Inserted :
Detectable as the fastening Detectable as the torque does not
angle gets too high. increase and the fastening angle gets
・Angle NG too high.
Cross Thread Seized Thread ・Angle NG

28 P OW E R TO O LS G E NE R AL C ATALO G
SPECIFICATIONS Recommended Air Pressure:0.4MPa (57psi) - 0.6MPa (85psi)

Torque Range Free Weight

Capacity Overall From Center Average
Speed less Sq. Drive
(Nominal Length to Outside Air
Model (Approx.) Socket Shank
Bolt Size) 0.4MPa 0.5MPa 0.6MPa min-1 (about) (about) Consumption Code
(about)

BOLT & NUT SE T T E R S

mm in Nm ft-lbs Nm ft-lbs Nm ft-lbs 0.4MPa 0.5MPa 0.6MPa mm in kg lb mm in mm in m3/min ft3/min
UA400AMC 6 1/4 4.0-9.0 2.9-6.6 5.0-11.0 3.7-8.1 7.0-13.0 5.1-9.6 2800 3000 3200 193.0 7 19/32 1.35 2.97 28.0 1 7/64 9.5 3/8 0.20 7.0 17G02
UA500AMC 6-8 1/4-5/16 8.0-18.0 5.9-13.3 9.0-20.0 6.6-14.8 11.0-25.0 8.1-18.5 3400 3600 3800 193.0 7 19/32 1.35 2.97 28.0 1 7/64 9.5 3/8 0.25 8.8 17G12
UA600AMC 8 5/16 14.0-26.0 10.3-19.2 16.0-30.0 11.8-22.2 18.0-38.0 13.3-28.1 3900 4100 4300 198.5 7 13/16 1.4 3.08 28.0 1 7/64 9.5 3/8 0.40 14.0 17G22
UA700AMC 8-10 5/16-3/8 20.0-35.0 14.8-25.9 25.0-40.0 18.5-29.6 30.0-50.0 22.2-37.0 5700 5900 6200 207.5 8 11/64 1.5 3.3 28.5 1 1/8 9.5 3/8 0.45 15.8 17G32
UA800AMC * 10-12 3/8-1/2 30.0-45.0 22.2-33.3 35.0-50.0 25.9-37.0 40.0-60.0 29.6-44.4 4800 5000 5300 215.5 8 31/64 1.7 3.74 29.0 1 9/64 9.5 3/8 0.48 16.8 17G42
UA900AMC 10-12 3/8-1/2 30.0-55.0 22.2-40.7 35.0-65.0 25.9-48.1 40.0-80.0 29.6-59.2 4800 5000 5300 227.5 8 61/64 2.15 4.73 28.0 1 7/64 12.7 1/2 0.53 18.6 17G82
UA1000AMC 12 1/2 40.0-70.0 29.6-51.8 45.0-75.0 33.3-55.5 50.0-90.0 37.0-66.6 4600 4800 5000 235.0 9 1/4 2.45 5.39 30.0 1 3/16 12.7 1/2 0.55 19.3 17G92
UA1300AMC 14 9/16 65.0-95.0 48.1-70.3 70.0-130.0 51.8-96.2 85.0-150.0 62.9-111.0 4200 4400 4600 256.5 10 3/32 3.25 7.15 36.0 1 27/64 12.7 1/2 0.73 25.6 17H02
Air Inlet size : NPT1/4" Air Hose size : 10mm×6.5mm×5m for UA400AMC and UA500AMC　12mm×8.0mm×5m for UA600AMC〜UA1000AMC　16mm×11.0mm×5m for UA1300AMC
*Please refrain from using UA800AMC at around max. torque as it is developed to aim at torque output between UA700AMC and UA900AMC.
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.

System Layout

UEC-4800TP
（SD-ANGLE）
（with angle board）

Solenoid Valve Assembly

（VP542）
（Part Number：911-075-0）

Sensor Cable Assembly

（Part Number：911-068-0）
Angle Encording Cable Assembly
（Part Number：911-074-0）

*Angle board should be mounted on UEC-4800TP(SD)series for angle detection.

OPTION

Cable Hose Assembly

Cable Hose Assembly is a combination hose of Air Hose and Tool side Controller side
Sensor Cable Assembly which can be used for the connection A D
between MC/EC wrench and Controller/Solenoid Valve Connector
B C
Coupler
Assembly.
Please ask your local URYU distributor for details of
Coupler Connector
corresponding models, size, hose inside diameter and so on.

Dimensions (mm) Hose

Hose inside
Parts Name Part Number Maximum Coiled Minimum Coiled
Color A B C D Diameter
Range of use Length (mm)
Cable Hose Assembly φ12×φ45×27（R）1.1 935-280-0 Red 1300 1100 2200 350 300 500 8
Cable Hose Assembly φ12×φ75×38（GR） 935-276-0 Gray 400 200 5800 480 200 400 8
Cable Hose Assembly φ12×φ45×28（GR) 935-275-0 Gray 1000 700 2400 370 300 500 8

POWER T OOLS G EN E R A L C ATA L O G 29

PNEUMATIC SUPER “INTELEC” SYSTEM UAMC TOOLS

UAMC SERIES
In pursuit of high-efficiency, high-accuracy and durability,
we have adopted auto-relief function*, which shortens the
fastening time and improve the fastening efficiency.
BOLT & NUT SE T T E R S

UA70SMC

UA40MC

UA40SMC UA50SMC UA60SMC

UA50MC UA60MC UA150MC

Solenoid Valve Assembly

（VP542）
FEATURES （Part Number：911-075-0）

• In addition to the protective handgrip, full-cover Tool Jacket is equipped as standard, which protects tools and reduces the damage to the
work.
• Ergonomic light weight & compact design ensures less operators fatigue. Controller :
UEC-4800TP （SD）
（UEC-4801）
Terminal

System Layout
to Controller
Sensor Cable Assembly Note : The air hose between the tool and solenoid
When using terminal (UEC-4800TP (SD)) When not using terminal (UEC-4801)
（Part Number：911-068-0） valve should be within 5m.

Solenoid Valve Assembly Solenoid Valve Assembly

（VP542）（VP542）
（Part Number：911-075-0）（Part Number：911-075-0）

Controller : Controller :
Terminal UEC-4800TP （SD）
（UEC-4801） UEC-4801 （UEC-4800TP
（SD）
）

to Controller to Controller
Sensor Cable Assembly Note : The air hose between the tool and solenoid Sensor Cable Assembly Valve Cable Assembly
（Part Number：911-068-0） valve should be within 5m. （Part Number：911-068-0）（Part Number：911-079-0）

Solenoid Valve Assembly

（VP542）
（Part Number：911-075-0）

Controller :
UEC-4801 （UEC-4800TP
（SD）
）

30 P OW E R TO O LS G E NE R AL C ATALO G
Quick-change driver anvil type
On pulling the sleeve, insert or
take off the bit.
9mm

BOLT & NUT SE T T E R S

The model name suffixing (D) is the
Quick-change driver anvil type.
6.35mm

SPECIFICATIONS (PISTOL TYPE) Recommended Air Pressure:0.4MPa (57psi) - 0.6MPa (85psi)

Torque Range Free Weight

Capacity Overall From Center Sq. Drive Average
Speed less
(Nominal Length Socket or Bit to(about)
(Approx.) Outside or Air
Model Bolt Size) (about) Hex. Size Consumption Code
0.4MPa 0.5MPa 0.6MPa min-1 (about)
mm in Nm ft-lbs Nm ft-lbs Nm ft-lbs 0.4MPa 0.5MPa 0.6MPa mm in kg lb mm in mm in m3/min ft3/min
UA40MC 6 1/4 4.0-9.0 2.9-6.6 5.0-11.0 3.7-8.1 7.0-13.0 5.1-9.6 3000 3300 3600 170 6 11/16 1.1 2.42 26 1 1/32 9.5 3/8 0.20 7.0 17B32
UA40DMC 6 1/4 3.5-7.5 2.5-5.5 4.5-9.5 3.3-7.0 5.0-12.0 3.7-8.8 3000 3300 3600 170 6 11/16 1.1 2.42 26 1 1/32 6.35 1/4 0.20 7.0 17B12
UA50MC 6-8 1/4-5/16 8.0-18.0 5.9-13.3 9.0-20.0 6.6-14.8 11.0-25.0 8.1-18.5 3800 4100 4200 170 6 11/16 1.1 2.42 26 1 1/32 9.5 3/8 0.25 8.8 17C42
UA50DMC 6-8 1/4-5/16 7.0-15.0 5.1-11.1 8.0-18.0 5.9-13.3 9.0-23.0 6.6-17.0 3800 4100 4200 170 6 11/16 1.1 2.42 26 1 1/32 6.35 1/4 0.25 8.8 17C22
UA60MC 8 5/16 14.0-26.0 10.3-19.2 16.0-30.0 11.8-22.2 18.0-38.0 13.3-28.1 4700 4900 5000 175 6 57/64 1.14 2.51 26 1 1/32 9.5 3/8 0.40 14.0 17D32
UA70MC 8-10 5/16-3/8 20.0-35.0 14.8-25.9 25.0-40.0 18.5-29.6 30.0-50.0 22.2-37.0 5000 5300 5700 187 7 23/64 1.24 2.73 26 1 1/32 9.5 3/8 0.45 15.8 17E02
UA80MC* 10-12 3/8-1/2 30.0-45.0 22.2-33.3 35.0-50.0 25.9-37.0 40.0-60.0 29.6-44.4 5300 5600 6000 195 7 43/64 1.55 3.41 26 1 1/32 9.5 3/8 0.48 16.8 17E52
UA90MC 10-12 3/8-1/2 30.0-55.0 22.2-40.7 35.0-65.0 25.9-48.1 40.0-80.0 29.6-59.2 5300 5600 6000 203 7 63/64 1.7 3.74 28 1 7/64 12.7 1/2 0.53 18.6 17E92
UA100MC 12 1/2 40.0-70.0 29.6-51.8 45.0-75.0 33.3-55.5 50.0-90.0 37.0-66.6 4600 4900 5200 215 8 15/32 2.05 4.51 30 1 3/16 12.7 1/2 0.55 19.3 17F32
UA130MC 14 9/16 65.0-95.0 48.1-70.3 70.0-130.0 51.8-96.2 85.0-150.0 62.9-111.0 3800 4000 4500 233 9 11/64 2.8 6.16 36 1 27/64 12.7 1/2 0.73 25.6 17F72
UA150MC 16 5/8 120.0-180.0 88.8-133.2 140.0-200.0 103.6-148.0 150.0-220.0 111.0-162.8 4000 4100 4300 251 9 7/8 4.0 8.80 40 1 37/64 19.0 3/4 0.70 24.7 17M02
Air Inlet size : NPT1/4" Air Hose size : 10mm×6.5mm×5m for UA40MC〜50MC　12mm×8.0mm×5m for UA60MC〜100MC 16mm×11.0mm×5m for UA130MC and UA150MC
*Please refrain from using UA80MC at around max. torque as it is developed to aim at torque output between UA70MC and UA90MC.
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.

SPECIFICATIONS (STRAIGHT TYPE) OK / NOK LED indicator equipped. Recommended Air Pressure:0.4MPa (57psi) - 0.6MPa (85psi)

Torque Range Free Weight

UXR-MC SERIES
SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Torque Range Free Weight

Capacity Speed Overall From Center Average
less Sq. Drive
(Nominal Bolt Size) (Approx.) Length to Outside Air
Model Socket Shank Code
0.5MPa 0.6MPa min-1 (about) (about) Consumption
(about)
mm in Nm ft-lbs Nm ft-lbs 0.5MPa 0.6MPa mm in kg lb mm in mm in m3/min ft3/min
UXR-1820MC 18 3/4 140-220 102.7-162.0 160-250 117.8-183.7 4400 4600 322 12 43/64 5.50 12.3 42.0 1 21/32 19.0 3/4 0.70 24.7 14852
UXR-2000MC 20 3/4 200-350 147.6-258.2 250-400 184.4-295.1 4600 4800 355 13 31/32 8.00 17.6 47.0 1 21/32 19.0 3/4 0.95 33.6 14862
UXR-2400SMC 24 7/8 300-550 221.3-405.8 350-600 258.2-442.7 3100 3300 457 17 63/64 12.5 27.6 55.0 1 11/64 25.4 1 1.00 35.3 16622
*External Solenoid Valve is required.
Air Inlet size : NPT3/8" for UXR-1820MC & UXR-2000MC NPT1/2" for UXR-2400SMC
Air Hose size : 12.7mm×5m for UXR-1820MC~UXR-2400SMC
Inside Trigger is available for UXR-2400SMC
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.

POWER T OOLS G EN E R A L C ATA L O G 31

PNEUMATIC OIL-PULSE TOOLS

UAT SERIES [SHUT OFF TYPE]

UAT series with high fastening accuracy are at the top in Pneumatic Tools.
Oil-Pulse Wrench with 3 advantages ; High Efficiency, High Accuracy and High
Durability.
FEATURES
BOLT & NUT SE T T E R S

Reliable Torque Accuracy and Assured Shut-Off In Consideration of Environment Aspect

1 Check Valve (PAT.) senses with accuracy the small volume 6 Taking the environment into consideration, the tool’
s body is unpainted.
of high-pressure oil from the Relief Valve section during Body Jacket (*) and Handle Cover are supplied as standard equipment to
operation and shuts the tool off as soon as it has reached protect the work.
the target torque. Torque accuracy improved significantly. *Body Jacket is made of oil-proof rubber.
2 Reset Spring (PAT.) enables to shut off the tool accurately
even when the air pressure is lowered to 0.35MPa. (Low 2 Reliable even with lower
Air Pressure Type) air pressure supply

1 Significantly improved
Improvement in Energy Efficiency and
Torque Accuracy
Maintenance Cost Reduction
3 Cross Section of Roller Blade
As a measure of pulsing, Roller Blades (*2)
(Driving Blade with Roller Pin) are adopted.
They greatly reduce the friction inside the
pulse unit during operation and power
weight ratio has been improved by 50% or
more (*3). Compared with our conventional
oil-pulse tools, Roller Blades create less
frictional wear of Driving Blade, which will reduce
maintenance costs. 4 Advantage of
6 Ergonomics
unique sealing
(*2) Roller Blades are adopted to UAT, ULT and UXR series. rubber grip and
(*3) Average value compared with our conventional oil-pulse tools. full-cover jacket
3 Advantage of Roller Blade
4 Cross Section of Sealing
As a measure of sealing, a partition on the 5 Adoption of Soft-touch
anvil and SU-Ring are adopted. The most trigger mechanism
significant problem of pulse unit is oil
sealing because pulsing is repeated
dozens of times per second with high
pressure. Our study which is gathered over
the years helped us to develop URYU’ s
original unique sealing SU-Ring (PAT.). As a result, it extends
the maintenance interval by 60% or more (*1).
(*1) Compared with our recommended maintenance interval for the
conventional oil-pulse tools.

Significant Load Reduction for Operators

5 Soft-touch trigger mechanism (PAT.) which can reduce the
load for trigger (valve lever) and the compact handgrip
greatly reduce the burden for operator’ s arms, hands and TM type (Fastening Check)
With UTM-1500 Fastening Counter with
fingers during repeated fastening. Poka-Yoke (sold separately), fastening
number and time control can be
monitored.

UAT40S UAT70S
UAT40 UAT70 UAT130

To use our product properly

UAT series automatically shut off by detecting inner pressure which is proportionate to fastening torque. The inner pressure is decided by the
inertia of rotating section (motor, pulse unit and socket) and working condition. Small models are especially affected by the inner pressure.
Please pay careful attention to the selection of model, socket size and air pressure using. Please contact your nearest URYU distributor if it is
difficult to determine the usage condition.

32 P OW E R TO O LS G E NE R AL C ATALO G
2 types are available for different air pressure level. Quick-change driver anvil type
They can be distinguished by colors. On pulling the sleeve, insert
or take off the bit.
Standard Type (0.5-0.6MPa) Low Air Pressure Type (0.4-0.5MPa)
9mm

The model name suffixing (D) is the

Quick-change driver anvil type.
6.35mm

Pistol Type Straight Type Pistol Type Straight Type

*Recommended Air Pressure for UAT30 and UAT40 series is 0.4-0.6MPa.

BOLT & NUT SE T T E R S

SPECIFICATIONS Recommended Air Pressure : 0.4MPa (57psi) ~ 0.6MPa (85psi)

Torque Range Free Overall Length Weight

Capacity From Center Sq. Drive Average
Speed less Socket less
(Nominal Socket or Bit to(about)
Outside or Air
Model (Approx.) or Bit Consumption Code
Bolt Size) 0.4~0.5MPa 0.5~0.6MPa Hex. Size
min-1 (about) (about)
mm in Nm ft-lbs Nm ft-lbs 0.4MPa 0.5MPa 0.6MPa mm in kg lb mm in mm in m3/min ft3/min
UAT30D 4-5 No.8-No.10 2.5-5.5 1.85-4.07 2.5-5.5 1.85-4.07 3600 3800 4200 165 6 1/2 0.88 1.94 23.5 15/16 6.35 1/4 0.30 10.5 18A02
UAT40 5 No.10 4.5-8.0 3.3-5.9 4.5-8.0 3.3-5.9 3300 3600 3800 162 6 3/8 0.92 2.0 24.5 31/32 9.5 3/8 0.25 8.8 18A42
UAT40D 5 No.10 4.5-8.0 3.3-5.9 4.5-8.0 3.3-5.9 3300 3600 3800 165 6 1/2 0.92 2.0 24.5 31/32 6.35 1/4 0.25 8.8 18A62
UAT50 6-8 1/4-5/16 - - 7.0-15.5 5.2-11.5 - 4400 4600 162 6 3/8 0.92 2.0 24.5 31/32 9.5 3/8 0.30 10.5 18B22
UAT50D 6-8 1/4-5/16 - - 7.0-15.5 5.2-11.5 - 4400 4600 165 6 1/2 0.92 2.0 24.5 31/32 6.35 1/4 0.30 10.5 18B52
UAT60 8 5/16 - - 15.0-32.0 11.1-23.7 - 6300 6700 174 6 27/32 0.95 2.1 24.5 31/32 9.5 3/8 0.35 12.3 18C82
UAT60D 8 5/16 - - 15.0-32.0 11.1-23.7 - 6300 6700 177 6 31/32 0.95 2.1 24.5 31/32 6.35 1/4 0.35 12.3 18D12
UAT70 8-10 5/16-3/8 - - 30.0-55.0 22.2-40.7 - 5700 6000 180 7 3/32 1.05 2.3 25.5 1 9.5 3/8 0.40 14.0 18E32
UAT80 10-12 3/8-1/2 - - 45.0-63.0 33.3-46.6 - 5300 5600 186 7 5/16 1.25 2.8 28.0 1 3/32 9.5 3/8 0.48 16.8 18F22
UAT90 10-12 3/8-1/2 - - 50.0-85.0 37.0-62.9 - 5400 5700 192 7 9/16 1.45 3.2 29.0 1 5/32 12.7 1/2 0.53 18.6 18F52
UAT100 12-14 1/2-9/16 - - 70.0-130.0 51.8-96.2 - 5500 5800 199 7 27/32 1.70 3.7 31.5 1 1/4 12.7 1/2 0.55 19.3 18F82
UAT130 14 9/16 - - 110-150 81.4-111 - 4300 4500 217 8 35/64 2.30 5.06 34.0 1 11/32 12.7 1/2 0.70 24.6 18G12
UAT150 16 5/8 - - 140-210 103.6-155.4 - 3800 3900 240 9 29/64 2.90 6.4 38.0 1 1/2 19.0 3/4 0.70 24.6 18G42
UAT180 16-18 5/8-3/4 - - 160-250 118.4-185.0 - 3100 3300 264 10 25/64 4.00 8.8 52.0 2 3/64 19.0 3/4 0.70 24.6 18G72
UAT200 18-20 3/4 - - 200-400 148-296 - 2300 2400 281 11 1/16 6.30 13.8 49.5 1 31/32 19.0 3/4 1.00 35.2 18H32
UAT50L 6-8 1/4-5/16 7.0-15.5 5.2-11.5 - - 4000 4300 - 162 6 3/8 0.92 2.0 24.5 31/32 9.5 3/8 0.25 8.8 18C12
UAT50DL 6-8 1/4-5/16 7.0-15.5 5.2-11.5 - - 4000 4300 - 165 6 1/2 0.92 2.0 24.5 31/32 6.35 1/4 0.25 8.8 18B72
UAT60L 8 5/16 13.0-28.0 9.6-20.7 - - 6000 6500 - 174 6 27/32 0.95 2.1 24.5 31/32 9.5 3/8 0.25 8.8 18D72
UAT60DL 8 5/16 13.0-28.0 9.6-20.7 - - 6000 6500 - 177 6 31/32 0.95 2.1 24.5 31/32 6.35 1/4 0.25 8.8 18D32
UAT70L 8-10 5/16-3/8 25.0-48.0 18.5-35.5 - - 5300 5600 - 180 7 3/32 1.05 2.3 25.5 1 9.5 3/8 0.30 10.5 18E82
UAT80L 10-12 3/8-1/2 35.0-55.0 25.9-40.7 - - 5000 5300 - 186 7 5/16 1.25 2.8 28.0 1 3/32 9.5 3/8 0.40 14.0 18F32
UAT90L 10-12 3/8-1/2 45.0-75.0 33.3-55.5 - - 5100 5600 - 192 7 9/16 1.45 3.2 29.0 1 5/32 12.7 1/2 0.45 15.8 18F62
UAT100L 12 1/2 60.0-110.0 44.4-81.4 - - 5500 5800 - 199 7 27/32 1.70 3.7 31.5 1 1/4 12.7 1/2 0.48 16.8 18F92
UAT130L 12-14 1/2-9/16 80.0-125.0 59.2-92.5 - - 4300 4500 - 217 8 35/64 2.30 5.06 34.0 1 11/32 12.7 1/2 0.50 17.6 18G22
UAT150L 14-16 9/16-5/8 110.0-170.0 81.4-125.8 - - 3700 3800 - 240 9 29/64 2.90 6.4 38.0 1 1/2 19.0 3/4 0.50 17.6 18G52
UAT180L 16 5/8 130.0-210.0 96.2-155.4 - - 3000 3100 - 264 10 25/64 4.00 8.8 52.0 2 3/64 19.0 3/4 0.50 17.6 18G82
UAT200L 16-18 5/8-3/4 170.0-280.0 125.8-207.2 - - 2200 2300 - 281 11 1/16 6.30 13.8 49.5 1 31/32 19.0 3/4 0.70 24.6 18H42
Air Inlet Thread : NPT 1/4” for UAT30D-UAT150(L) Air Hose Size : 10mm×6.5mm×5m for UAT30D – UAT50 12mm×8.0mm×5m for UAT60 – UAT100
NPT 3/8” for UAT180(L) 16mm×11.0mm×5m for UAT100L – UAT180(L) 21mm×12.7mm×5m for UAT200(L)
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.

SPECIFICATIONS Recommended Air Pressure : 0.4MPa (57psi) ~ 0.6MPa (85psi)

Torque Range Free Overall Length Weight

UXR-T SERIES
SPECIFICATIONS Recommended Air Pressure:0.6MPa(85psi)

Free Overall Length Weight From Center Average

Capacity Speed less Sq. Drive
Torque Range less Socket to Outside Air
Model (Nominal Bolt Size) (about) (about) Socket (about) Shank Consumption Code
min-1 (about)
3 3
mm in Nm ft-lbs 0.5MPa 0.6MPa mm in kg lb mm in mm in m /min ft /min
UXR-T2400S 24 7/8 360-650 260-470 3400 3600 444 17 31/64 12.00 26.46 61.5 2 27/64 25.4 1 1.00 35.3 16522
UXR-T3000S 30 1 1/8 450-850 330-620 4200 4400 477 18 25/32 14.50 31.97 62.0 2 7/16 25.4 1 1.05 37.1 17022
Air Inlet Thread : NPT1/2" 　　Air Hose Size : 12.7mm×5m　　Inside Trigger is available
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.

POWER T OOLS G EN E R A L C ATA L O G 33

PNEUMATIC OIL-PULSE TOOLS

UL SERIES [ NON SHUT-OFF TYPE ]

Ultralight Oil-Pulse Tool.
Reduce the burden on the operators.
BOLT & NUT SE T T E R S

UL30 UL70 UL80

UL50S

UL30S UL40S

UL50 UL100 UL150 UL60S UL70S

Quick-change driver anvil type 9mm

On pulling the sleeve, insert or take
off the bit.
The model name suffixing (D) is the 6.35mm
Quick-change driver anvil type.

SPECIFICATIONS Recommended Air Pressure : 0.5MPa (72psi) - 0.6MPa (85psi)

Torque Range Free Overall Length Weight

Capacity Speed From Center Sq. Drive Average
Less Socket less
(Nominal Bolt Size) (Approx.) to Outside or Air
Model or Bit Socket or Bit Code
0.5MPa 0.6MPa min-1 (Approx.) Hex. Size Consumption
(Approx.) (Approx.)
mm in Nm ft-lbs Nm ft-lbs 0.5MPa 0.6MPa mm in kg lb mm in mm in m3/min ft3/min
UL30 5 No.10 5.5-10.5 4.1-7.8 6-12 4.4-8.9 5400 5700 133 5 15/64 0.70 1.5 20.5 13/16 9.5 3/8 0.20 7.0 14282
UL30D 5 No.10 5.5-10.5 4.1-7.8 6-12 4.4-8.9 5400 5700 137 5 25/64 0.70 1.5 20.5 13/16 6.35 1/4 0.20 7.0 14292
UL40 5-6 No.10-1/4 11-20 8.1-14.8 13-22 9.6-16.3 5800 6100 133 5 15/64 0.70 1.5 20.5 13/16 9.5 3/8 0.20 7.0 14302
UL40D 5-6 No.10-1/4 9-17 6.7-12.6 11-20 8.1-14.8 5800 6100 137 5 25/64 0.70 1.5 20.5 13/16 6.35 1/4 0.20 7.0 14322
UL50 6-8 1/4-5/16 20-32 14.8-23.7 22-35 16.3-25.9 6100 6400 140 5 33/64 0.77 1.7 22.0 55/64 9.5 3/8 0.30 10.5 14332
UL50D 6-8 1/4-5/16 16-25 11.8-18.5 18-28 13.3-20.7 6100 6400 146 5 3/4 0.77 1.7 22.0 55/64 6.35 1/4 0.30 10.5 14352
UL60 8 5/16 30-45 22.2-33.3 32-50 23.7-37.0 6700 7000 140 5 33/64 0.82 1.8 22.0 55/64 9.5 3/8 0.40 14.0 14362
UL60D 8 5/16 20-32 14.8-23.7 22-35 16.3-25.9 6700 7000 143 5 5/8 0.82 1.8 22.0 55/64 6.35 1/4 0.40 14.0 14372
UL70 8-10 5/16-3/8 36-60 26.6-44.4 40-65 29.6-48.1 5400 5700 153 6 1/32 0.95 2.1 23.0 29/32 9.5 3/8 0.45 15.8 14382
* UL80 10-12 3/8-1/2 40-55 29.6-40.7 45-70 33.3-50.0 5600 5900 162 6 3/8 1.15 2.5 26.0 1 1/32 9.5 3/8 0.48 16.8 11722
UL90 10-12 3/8-1/2 55-90 40.7-66.6 60-100 44.4-74.0 5700 6000 170 6 11/16 1.30 2.9 27.0 1 1/16 12.7 1/2 0.53 18.6 14392
UL100 12-14 1/2 72-120 53.3-88.8 80-130 59.2-96.2 5100 5400 177 6 31/32 1.66 3.7 29.5 1 5/32 12.7 1/2 0.58 20.3 15502
UL130 14 9/16 90-145 66.6-107.3 100-160 74.0-118.4 4200 4400 197 7 3/4 2.30 5.1 32.0 1 17/64 12.7 1/2 0.65 22.7 14102
UL150 16 5/8 135-210 99.6-154.7 150-230 109.9-169.6 3500 3800 213 8 25/64 3.00 6.6 36.0 1 27/64 19.0 3/4 0.70 24.7 11482
UL30S 5 No.10 5.5-10.5 4.1-7.8 6-12 4.4-8.9 4700 5000 205 8 5/64 0.62 1.4 20.5 51/64 9.5 3/8 0.23 8.1 10622
UL30SD 5 No.10 5.5-10.5 4.1-7.8 6-12 4.4-8.9 4700 5000 209 8 15/64 0.62 1.4 20.5 51/64 6.35 1/4 0.23 8.1 10632
UL40S 5-6 No.10-1/4 11-20 8.1-14.8 11-22 8.1-16.3 4700 5000 205 8 5/64 0.62 1.4 20.5 51/64 9.5 3/8 0.23 8.1 10652
UL40SD 5-6 No.10-1/4 9-17 6.7-12.6 9-20 6.7-14.8 4700 5000 209 8 15/64 0.62 1.4 20.5 51/64 6.35 1/4 0.23 8.1 10662
UL50S 6-8 1/4-5/16 20-32 14.8-23.7 22-35 16.3-25.9 6100 6400 208 8 3/16 0.74 1.6 22.0 7/8 9.5 3/8 0.35 12.3 10682
UL50SD 6-8 1/4-5/16 16-25 11.8-18.5 18-28 13.3-20.7 6100 6400 214 8 27/64 0.74 1.6 22.0 7/8 6.35 1/4 0.35 12.3 10692
UL60S 8 5/16 30-45 22.2-33.3 32-50 23.7-37.0 6400 6700 209 8 15/64 0.77 1.7 22.0 7/8 9.5 3/8 0.45 15.8 10722
UL60SD 8 5/16 20-32 14.8-23.7 22-35 16.3-25.9 6400 6700 212 8 11/32 0.77 1.7 22.0 7/8 6.35 1/4 0.45 15.8 10732
UL70S 8-10 5/16-3/8 36-60 26.6-44.4 36-60 26.6-44.4 5100 5400 223 8 25/32 0.87 1.9 23.5 59/64 9.5 3/8 0.40 14 10752
Air Inlet Size : NPT1/4"
Air Hose Size : 10mm×6.5mm×5m for UL30-50 12mm×8.0mm×5m for UL60-150
Air Hose Size : 10mm×6.5mm×5m for UL30S-50S 12mm×8.0mm×5m for UL60S-70S
*Please refrain from using UL80 at around max. torque as it is developed to aim at torque output between UL70 & UL90.
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.

34 P OW E R TO O LS G E NE R AL C ATALO G
PNEUMATIC OIL-PULSE TOOLS

CORNER TYPE ULT / UX SERIES

ULT SERIES [SHUT OFF TYPE]
Easy to operate in narrow area.
Reliable fastening with oil-pulse wrench.
2 types are available for different air
pressure level.

BOLT & NUT SE T T E R S

They can be distinguished by colors.
Standard Type Low Air Pressure Type
（0.5∼0.6MPa）（0.4∼0.5MPa）

ULT50C ULT70CH

★To do torque adjustment... Head Sizes

Remove the Hammer Casing Nut and confirm you see H C H C
the Relief Valve Spindle through the hole. Use Allen Model Model
mm in mm in mm in mm in
Wrench (1.5mm) to adjust torque. Turn the Relief
H

Valve Spindle clockwise to increase tightening torque ULT40C 59 2 21/64 16 5/8 ULT70C 70 2 3/4 18 45/64

←
and anti-clockwise to decrease tightening torque. Fix
ULT50C 59 2 21/64 16 5/8 ULT70CH 77 3 1/32 22 7/8
the Hammer Casing Nut firmly after adjustment.
Remove this way ULT60C 59 2 21/64 16 5/8
C
SPECIFICATIONS Recommended Air Pressure : 0.4MPa (57psi) - 0.6MPa (85psi)

Torque Range Free Weight

Capacity Speed Overall Length From Center Average
less Sq. Drive
(Nominal Bolt Size) (Approx.) less Socket to Outside Air
Model Socket Shank Code
0.4~0.5MPa 0.5~0.6MPa min-1 (about) (about) Consumption
(about)
mm in Nm ft-lbs Nm ft-lbs 0.4MPa 0.6MPa mm in kg lb mm in mm in m3/min ft3/min
ULT40C 5 No.10 - - 4.5-7.5 3.33-5.55 3300 3500 250 9 27/32 1.30 2.9 24.5 31/32 9.5 3/8 0.20 7.0 12692
ULT50C 6-8 1/4-5/16 - - 7.0-15.5 5.2-11.5 - 4500 250 9 27/32 1.35 3.0 24.5 31/32 9.5 3/8 0.25 8.6 12732
ULT60C 8 5/16 - - 13-28 9.6-20.7 - 5200 261 10 9/32 1.45 3.2 24.5 31/32 9.5 3/8 0.30 10.5 12752
ULT70C 8 5/16 - - 20-35 14.8-25.9 - 4400 275 10 53/64 1.65 3.6 26.5 1 3/64 9.5 3/8 0.35 12.3 12772
ULT70CH 8-10 5/16-3/8 - - 30-50 22.2-37.0 - 2500 290 11 27/64 1.85 4.1 26.5 1 3/64 12.7 1/2 0.35 12.3 11292
ULT50CL 6-8 1/4-5/16 7.0-15.5 5.2-11.5 - - 4500 - 250 9 27/32 1.35 3.0 24.5 31/32 9.5 3/8 0.20 7.0 12742
ULT60CL 8 5/16 13-28 9.6-20.7 - - 5200 - 261 10 9/32 1.45 3.2 24.5 31/32 9.5 3/8 0.25 8.6 12762
ULT70CL 8 5/16 20-35 14.8-25.9 - - 4300 - 275 10 53/64 1.65 3.6 26.5 1 3/64 9.5 3/8 0.27 9.5 12782
ULT70CHL 8-10 5/16-3/8 30-50 22.2-37.0 - - 2300 - 290 11 27/64 1.85 4.1 26.5 1 3/64 12.7 1/2 0.27 9.5 11302
Air Inlet Size : NPT 1/4"
Air Hose Size : 10mm×6.5mm×5m for ULT40C〜50C(L) 12mm×8.0mm×5m for ULT60C〜70C(L) , and 70CH(L)
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.

UX SERIES [NON SHUT-OFF TYPE]

Head Sizes C H
Model
mm in mm in
UX-500C 15.0 19/32 59.5 2 11/32
H

UX-612C 16.0 5/8 59.5 2 11/32

UX-612A C UX-700C 16.0 5/8 62.0 2 7/16
UX-800C 18.0 45/64 70.0 2 3/4
UX-900C 18.0 45/64 70.0 2 3/4
Paint color of the actual product
may be different from the images. UX-1000C 21.5 27/32 80.0 3 5/32
UX-500C UX-800C UX-1000C
SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Torque Range Free Weight

Capacity Speed Overall Average
less Angle Height Sq. Drive
(Nominal Bolt Size) (Approx.) Length Air
Model Socket (about) Shank Code
0.5MPa 0.6MPa min-1 (about) Consumption
(about)
mm in Nm ft-lbs Nm ft-lbs 0.5MPa 0.6MPa mm in kg lb mm in mm in m3/min ft3/min
UX-500C 5-6 No. 10-1/4 11-17 8.0-12.5 13-20 10.0-15.0 8800 9300 270 10 5/8 1.28 2.8 59.5 2 11/32 9.5 3/8 0.25 8.8 17792
UX-612C 6 1/4 13.5-24 9.9-17.7 16-28 12.0-20.0 9300 9800 283 11 9/64 1.38 3.0 59.5 2 11/32 9.5 3/8 0.32 11.2 17942
UX-700C 8 5/16 17-31 12.5-22.8 20-36 16.0-28.0 9000 9500 273 10 3/4 1.67 3.7 62.0 2 7/16 9.5 3/8 0.35 12.3 17952
UX-800C 8-10 5/16-3/8 25-36 18.4-26.5 29-43 20.0-31.0 8500 9000 285 11 7/32 1.93 4.3 70.0 2 3/4 9.5 3/8 0.40 14.1 17962
UX-900C 10 3/8 30-47 22.1-34.6 35-55 25.0-40.0 7300 7600 338 13 5/16 2.25 5.0 70.0 2 3/4 9.5 3/8 0.42 14.9 17972
UX-1000C 10-12 3/8-1/2 43-68 31.7-50.1 50-80 40.0-58.0 6600 6800 365 14 3/8 3.05 6.8 80.0 2 5/32 12.7 1/2 0.51 17.9 17982
UX-612A 6 1/4 13.5-24 9.9-17.7 16-28 12.0-20.0 9300 9800 297 11 11/16 1.38 3.0 - - 9.5 3/8 0.30 10.5 17802
Air Inlet size : NPT1/4"
Air Hose Size : 6.35mm (1/4") for UX-500C 9.5mm (3/8") for UX-612C~UX-1000C
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.

POWER T OOLS G EN E R A L C ATA L O G 35

PNEUMATIC OIL-PULSE TOOLS

U / UX / UXR / UX-ST SERIES [ NON SHUT-OFF TYPE ]

U-Wrench was released in 1978, UX-Wrench was released in 1984.
Our long-selling tools proud reliability and achievements.

U-310SD
BOLT & NUT SE T T E R S

9mm
Quick-change
UX-900S driver anvil type
Paint color of the actual product may be different On pulling the sleeve,
from the images. The model name suffixing (D) is the
insert or take off the bit. 6.35mm Quick-change driver anvil type.
SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Torque Range Free Overall Weight From Center Sq. Drive Average
Capacity Speed Length less to Outside or Air
Model (Nominal Bolt Size) (Approx.) (about) Socket or Bit (about) Hex. Size Consumption Code
0.5MPa 0.6MPa min-1 (about)
3 3
mm in Nm ft-lbs Nm ft-lbs 0.5MPa 0.6MPa mm in kg lb mm in mm in m /min ft /min
U-310SD 3-4 No.5-No.8 2.1-2.6 1.6-1.9 2.5-3.1 1.8-2.2 10000 11000 222 8 47/64 0.62 1.5 18.0 47/64 6.35 1/4 0.15 5.3 19662
U-350SD 3-4 No.5-No.8 3.0-5.0 2.2-3.7 3.5-5.8 2.5-4.2 10000 10500 238 9 3/8 0.71 1.5 22.0 47/64 6.35 1/4 0.15 5.3 19332
U-350D 3-4 No.5-No.8 3.0-5.0 2.2-3.7 3.5-5.8 2.5-4.2 10000 10500 154 6 1/16 0.77 1.7 22.0 7/8 6.35 1/4 0.15 5.3 19242
UXR-2000 18-20 3/4 255-385 188.2-284.1 300-450 220-330 4000 4200 282 11 7/64 6.50 14.3 47.0 1 27/32 19.0 3/4 0.90 31.5 17602
Air Inlet Thread : NPT1/4" for U-350D Air Hose Size : 6.35mm (1/4") for U-350D *Torque Range is a guideline value. Please make tool selection
NPT3/8" for UXR-2000 12.7mm (1/2") for UXR-2000 appropriately in accordance with an actual application.

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Torque Range Free Overall Weight From Center Average

Capacity Speed Length less to Outside Sq. Drive Air
Model (Nominal Bolt Size) (Approx.) (about) Socket (about) Shank Consumption Code
0.5MPa 0.6MPa min-1
(about)
3 3
mm in Nm ft-lbs Nm ft-lbs 0.5MPa 0.6MPa mm in kg lb mm in mm in m /min ft /min
UX-900S 10 3/8 38-64 28-47.2 45-75 35-55 7300 7600 310 12 13/64 1.80 3.9 37.5 1 9/64 12.7 1/2 0.42 14.9 18072
UX-1000S 10-12 3/8-1/2 43-81 31.7-59.8 50-95 40-70 6500 6800 320 12 19/32 2.10 4.6 39.0 1 17/64 12.7 1/2 0.51 17.9 18082
UX-1300S 13-14 1/2-9/16 68-110 50.2-81.2 80-130 60-95 5800 6200 336 13 15/64 2.55 6.6 42.0 1 11/32 12.7 1/2 0.55 19.4 18092
UXR-2000S 18-20 3/4 255-385 188-284 300-450 220-330 4000 4200 340 13 25/64 7.00 15.4 47.0 1 27/32 19.0 3/4 0.90 31.6 17632
UXR-2400S 24 7/8 340-550 251-406 400-650 290-470 3700 4000 385 15 5/32 11.00 23.7 55.0 2 1/8 25.4 1 1.00 35.2 17692
UXR-3000S 30 1/4 425-725 313-535 500-850 360-630 4200 4400 455 17 29/32 13.30 29.3 62.0 2 1/8 25.4 1 1.05 37.1 17532
Air Inlet Size : NPT1/4" for UX-900S~UX-1300S NPT3/8" for UXR-2000S Inside Trigger is available for UXR-2000S~UXR-3000S *Torque Range is a guideline value.
NPT1/2" for UXR-2400S & UXR-3000S Air Hose Size : 9.5mm (3/8") for UX-900S~UX-1300S Please make tool selection appropriately in
12.7mm (1/2") for UXR-2000S~UXR-3000S accordance with an actual application.

STUD BOLT WRENCHES

FEATURES
Auto-reversing mechanism
These unique Push-Pull type Oil-Pulse Right rotation
R
tools simplify stud-bolt driving job
considerably without any special Right rotation
R

operation for frequent reversing. Push

UX-ST1000 UX-ST800 the tool forward to the application for Left rotation
L
Left rotation
L

Paint color of the actual product may be different

driving and simply pull back for
from the images. automatic reversing.
SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Torque Range Free Weight

CUSTOM-MADE M0DELS *These Models are specially designed for user’

s request.

36 P OW E R TO O LS G E NE R AL C ATALO G
BOLT & NUT SETTERS

RATCHET WRENCHES

URW-8

BOLT & NUT SE T T E R S

URW-6 URW-12N

URW-8N URW-12NB

（W）
（H）

URW-10N

FEATURES （C）

Most suitable for fastening in narrow （H）（W）

（O）

application. Bent head type, Thinner head

type and Extended head type are also Head Sizes
available for hard-to-reach access
（L）
fastening jobs. （C）

Reverse rotation is obtained by simply

（H）（W）
turning a tool over.

URW-60 • URW-60R : 160°

URW-80 • URW-80R : 160° H W L C
URW-81 • URW-81R : 150° Model
mm in mm in mm in mm in
URW-60R URW-60 URW-6,60,60R 13.0 33/64 20.0 25/32 88.0 3 15/32 10.0 25/64
URW-80R URW-80
URW-81R URW-81 URW-8,8N,9N,80,80R,81,81R 18.0 45/64 25.0 63/64 102.5 4 1/32 12.5 31/64
(Right Rotation) (Left Rotation) URW-10N 18.0 45/64 33.0 1 19/64 106.5 4 3/16 16.5 21/32
URW-12N 18.0 45/64 36.0 1 27/64 109.5 4 5/16 18.0 45/64
URW-12NA 18.0 45/64 46.0 1 13/16 120.5 4 3/4 23.0 29/32
URW-12NB 18.0 45/64 54.0 2 1/8 128.5 5 1/16 27.0 1 1/16

SPECIFICATIONS Recommended Air Pressure : 0.4MPa (57psi)

Free Average
Capacity Overall Length Weight
Max. Torque Speed Hex. Size of Ratchet Air
Model (Nominal Bolt Size) (about) (about) Code
(about) Consumption

mm in Nm ft-lbs min-1 mm in kg lb mm in m3/min ft3/min

URW-6 6 1/4 11 8.1 210 292 11 1/2 1.15 2.53 6, 7, 8, ⑩, 11, 12 1/4, 5/16, 3/8, 7/16 0.28 9.9 20052
URW-60 6 1/4 11 8.1 210 288 11 11/32 1.15 2.53 6, 7, 8, ⑩, 11, 12 1/4, 5/16, 3/8, 7/16 0.28 9.9 20082
URW-60R 6 1/4 11 8.1 210 288 11 11/32 1.15 2.53 6, 7, 8, ⑩, 11, 12 1/4, 5/16, 3/8, 7/16 0.28 9.9 20092
URW-8N 8 5/16 16 11.8 260 300 11 13/16 2.25 4.95 7, 8, 9, 10, 11, 12, 13, ⑭, 15 7/16, 1/2, 9/16 0.55 19.5 21212
URW-80 8 5/16 16 11.8 240 300 11 13/16 2.25 4.95 7, 8, 9, 10, 11, 12, 13, ⑭, 15 7/16, 1/2, 9/16 0.55 19.5 22912
URW-80R 8 5/16 16 11.8 240 300 11 13/16 2.25 4.95 7, 8, 9, 10, 11, 12, 13, ⑭, 15 7/16, 1/2, 9/16 0.55 19.5 22962
URW-81 8 5/16 16 11.8 240 300 11 13/16 2.25 4.95 7, 8, 9, 10, 11, 12, 13, ⑭, 15 7/16, 1/2, 9/16 0.55 19.5 23112
URW-81R 8 5/16 16 11.8 240 300 11 13/16 2.25 4.95 7, 8, 9, 10, 11, 12, 13, ⑭, 15 7/16, 1/2, 9/16 0.55 19.5 23162
URW-8 8 5/16 16 11.8 240 360 14 3/16 1.90 4.18 7, 8, 9, 10, 11, 12, 13, ⑭, 15 7/16, 1/2, 9/16 0.56 19.8 20152
URW-9N 10 3/8 31 22.9 140 380 15 2.35 5.17 7, 8, 9, 10, 11, 12, 13, ⑭, 15 7/16, 1/2, 9/16 0.67 23.7 22742
URW-10N 10 3/8 57 42.2 155 394 15 33/64 2.65 5.83 10, 12, 13, 14, 15, 16, ⑰, 18, 19 9/16, 5/8, 11/16, 3/4 0.70 25.0 21412
URW-12N 13 1/2 59 43.7 145 397 15 5/8 2.70 5.94 12, 14, 16, 17, 18, 19, , 22, 23 3/8, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 0.70 25.0 21512
URW-12NA 14 9/16 78 57.7 105 408 16 1/16 2.80 6.16 17, 18, 19, 21, 22, 23, , 26, 27 11/16, 3/4, 15/16 0.70 25.0 21612
URW-12NB 16 5/8 93 68.8 90 416 16 19/64 2.90 6.38 24, 29, , 32 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/8 0.70 25.0 21812
Air Inlet Thread (Pipe Tap) : NPT1/4"
Air Hose Size (Inside Diameter) : 9.5mm (3/8")
Code mentioned in the above list comes with the standard Hex size of ratchet circled ○. Specify Hex. size when ordering.
Max Torque is a guideline at 0.6MPa.

POWER T OOLS G EN E R A L C ATA L O G 37

BOLT & NUT SETTERS

OPEN-END WRENCHES / GEARED WRENCHES

UOW-11-14 Safety Start Lever

BOLT & NUT SE T T E R S

Safety Start Lever is installed as

standard equipment for UOW series to
prevent accidental start of tool.

UOW-11-10 UOW-11-22

Push down the self-locking lever to

UOW-11-30 UOW-T60-22 operate tool as above.

➡
UGW-8N

FEATURES EXTERNAL DIAL

Torque adjustment. (No special tool is
(OPEN-END WRENCHES) needed)
URYU offers two types of Open-End Wrenches for fast, accurate tube nut tightening. UOW-11 series is
a stall torque type and UOW-T60 series is a mechanical shut-off type with external torque adjustment.

(GEARED WRENCHES) 1 : Min.

Gear drive mechanism amplifies and transmits the motor rotation power. UGW Geared Wrench offers 3 : Max.
quiet operation with good durability.

UOW-T60 series only.

（H）
（W） H W O C
Head Sizes Model
mm in mm in mm in mm in
UOW-11-10,UOW-T60-10 14.0 35/64 37.0 1 29/64 5.0~6.0 13/64~15/64 10.0 25/64
UOW-11-14,UOW-T60-14 14.0 35/64 40.0 1 37/64 6.0~9.0 15/64~23/64 13.0 33/64
（C）
UOW-11-22,UOW-T60-22 16.0 5/8 56.0 2 13/64 13.0~15.0 33/64~19/32 17.0 43/64
（H）（W）
（O） UOW-11-30,UOW-T60-30 16.0 5/8 68.0 2 43/64 15.0~23.0 19/32~29/32 21.0 53/64
UGW-6N 14.0 35/64 32.0 1 17/64 - - 12.9 33/64
UGW-8N 14.0 35/64 36.0 1 27/64 - - 15.8 39/64
（L）
（C）

（H）（W）
SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Free Average
Max. Speed Overall Length Weight Hex. Size of Gear Socket Air
Model Torque / Range (about) (about) Code
(about) Consumption
-1 3 3
Nm ft-lbs min mm in kg lb mm in m /min ft /min
UOW-11-10 13 9.6 390 295 11 47/64 1.50 3.31 7, 8, 9, ⑩, 11, 12 1/4, 5/16, 3/8, 7/16 0.30 10.5 23502
UOW-11-14 16 11.8 290 311 12 1/4 1.60 3.52 10, 11, 12, 13, ⑭, 15, 16, 17 7/16, 1/2, 9/16, 5/8 0.30 10.5 23542
UOW-11-22 24 17.8 220 326 12 53/64 1.75 3.85 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, , 24 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 0.30 10.5 23602
UOW-11-30 32 23.7 160 347 13 21/32 2.00 4.40 14, 17, 18, 19, 23, 24, 26, 27, 29, , 32 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/8, 1-3/16 0.30 10.5 23662
UOW-T60-10 4-14 3.0-10.4 300 370 14 5/8 2.10 4.62 7, 8, 9, ⑩, 11, 12 1/4, 5/16, 3/8, 7/16 0.30 10.5 24202
UOW-T60-14 5-17 3.7-12.6 240 385 15 1/8 2.20 4.85 10, 11, 12, 13, ⑭, 15, 16, 17 7/16, 1/2, 9/16, 5/8 0.30 10.5 24222
UOW-T60-22 7-24 5.2-17.8 170 400 15 3/4 2.35 5.18 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, , 24 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 0.30 10.5 24242
UOW-T60-30 10-32 7.4-23.7 130 420 16 5/8 2.60 5.73 14, 17, 18, 19, 23, 24, 26, 27, 29, , 32 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/8, 1-3/16 0.30 10.5 24262
UGW-6N 18 13.3 530 310 12 13/64 1.40 3.08 9, ⑩, 11, 12 0.30 10.5 24602
UGW-8N 23 17.0 410 322 12 11/16 1.45 3.19 10, 12, 13, ⑭, 17 0.30 10.5 24652
Air Inlet Thread (Pipe Tap) : NPT1/4" Air Hose Size (Inside Diameter) : 9.5mm (3/8")
Code mentioned in the above list comes with the standard Hex size of gear socket circled ○. Specify Hex. size when ordering.

38 P OW E R TO O LS G E NE R AL C ATALO G
BOLT & NUT SETTERS

ANGLE NUTRUNNERS
Instant automatic shut-off providing reduced reaction.
Low inertia design providing increased accuracy.

BOLT & NUT SE T T E R S

UAN-611RM TORQUE MONITORING TYPE

UAN-611R-30C

FEATURES
• Simple and accurate method to adjust torque output by Phillips Driver System Layout For Torque Monitoring Type
permitting quick setup.
• Designed with a spline type interface allowing multiple head positions for
Controller : UEC-4800(SD)/ＵＥＣ-４８００ＴＰ(SD)
the most comfortable throttle location on those hard to reach applications. UEC-4800
TORQUE CONTROLLER
URYU SEISAKU,LTD.JAPAN

• The pneumatic motor is designed to offer high power performance by

ANALOG MADE IN JAPAN
IN OUT OUTPUT
SENSOR IN IN1 IN3 IN5 COM IN COM
S.G M.S COM IN2 IN4 IN6 COM
NETWORK PC

reducing motor inertia to the minimum level.

UEC
4800 miniSD CARD

V.
PC
..
URYU
OUT OUT2 OUT4 +24V OUT AC100-230V 50/60Hz 0.35A
CN-1 COM
OUT1 OUT3 OUT5 VALVE OUT6
COM
POWER

• Ergonomically designed Protector offers firm gripping for ergonomic

FUSE
AC250V T3.15A

fastening. UEC-4800TP

Front Panel Rear Panel

C H
Head Sizes Model Sensor Cable Assembly
mm in mm in 5M (Part Number : 910-316-0)
UAN-611R-60C, UAN-611RM-60C 14.0 35/64 47.0 1 27/32
UAN-611R-50C, UAN-611RM-50C 14.0 35/64 47.0 1 27/32
UAN-611R-40C, UAN-611RM-40C 14.0 35/64 47.0 1 27/32
H

UAN-611R-30C, UAN-611RM-30C 14.0 35/64 47.0 1 27/32

C UAN-701R-60C, UAN-701RM-60C 14.0 35/64 47.0 1 27/32
UAN-701R-40C, UAN-701RM-40C 18.0 45/64 51.0 2 1/64
UAN-701R-30C, UAN-701RM-30C 18.0 45/64 58.0 2 9/32

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Overall Weight
Free From Center Angle Square Average
Length less
Bolt Capacity Torque Range Speed to Outside Height Drive Air
Model less Socket Socket Code
(about) (about) (about) Shank Consumption
(about) (about)
-1 3 3
mm in Nm ft-lbs min mm in kg lb mm in mm in mm in m /min ft /min
UAN-611RM-60C 6 1/4 6.5-12.0 4.3-8.6 620 419 16 1/2 2.0 4.4 14.0 35/64 47 1 55/64 9.5 3/8 0.6 21.2 26852
UAN-611RM-50C 6-8 1/4-5/16 8.5-15.0 5.7-10.8 470 409 16 7/64 2.0 4.4 14.0 35/64 47 1 55/64 9.5 3/8 0.6 21.2 26842
UAN-611RM-40C 6-8 1/4-5/16 10.0-18.0 7.2-12.9 400 409 16 7/64 2.0 4.4 14.0 35/64 47 1 55/64 9.5 3/8 0.6 21.2 26832
UAN-611RM-30C 8 5/16 13.0-25.0 9.3-18.0 270 409 16 7/64 2.0 4.4 14.0 35/64 47 1 55/64 9.5 3/8 0.6 21.2 26822
UAN-701RM-60C 8 5/16 20.0-31.0 14.5-23.1 600 480 18 57/64 2.7 5.94 14.0 35/64 47 1 55/64 9.5 3/8 0.9 31.8 27032
UAN-701RM-40C 8-10 5/16-3/8 28.0-45.0 21.0-33.3 400 492 19 3/8 2.9 6.38 18.0 45/64 51 2 9.5 3/8 0.9 31.8 27022
UAN-701RM-30C 10-12 3/8-1/2 37.0-60.0 27.5-44.1 300 492 19 3/8 2.9 6.38 18.0 45/64 58 2 9/32 12.7 1/2 0.9 31.8 27012
Air Inlet Thread (Pipe Tap) : NPT1/4" Air Hose Size (Inside Diameter) : 9.5mm (3/8")
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Weight
Free Overall From Center Angle Square Average
less
Bolt Capacity Torque Range Speed Length to Outside Height Drive Air
Model Socket Code
(about) (about) (about) (about) Shank Consumption
(about)
-1 3 3
mm in Nm ft-lbs min mm in kg lb mm in mm in mm in m /min ft /min
UAN-611R-60C 6 1/4 6.5-12.0 4.3-8.6 620 383 15 5/64 1.6 3.52 14.0 35/64 47 1 55/64 9.5 3/8 0.6 21.2 26892
UAN-611R-50C 6-8 1/4-5/16 8.5-15.0 5.7-10.8 470 373 14 11/16 1.6 3.52 14.0 35/64 47 1 55/64 9.5 3/8 0.6 21.2 26882
UAN-611R-40C 6-8 1/4-5/16 10.0-18.0 7.2-12.9 400 373 14 11/16 1.6 3.52 14.0 35/64 47 1 55/64 9.5 3/8 0.6 21.2 26872
UAN-611R-30C 8 5/16 13.0-25.0 9.3-18.0 270 373 14 11/16 1.6 3.52 14.0 35/64 47 1 55/64 9.5 3/8 0.6 21.2 26862
UAN-701R-60C 8 5/16 20.0-31.0 14.5-23.1 600 445 17 33/64 2.4 5.29 14.0 35/64 47 1 55/64 9.5 3/8 0.9 31.8 26972
UAN-701R-40C 8-10 5/16-3/8 28.0-45.0 21.0-33.3 400 455 17 29/32 2.4 5.29 18.0 45/64 51 2 9.5 3/8 0.9 31.8 26962
UAN-701R-30C 10-12 3/8-1/2 37.0-60.0 27.5-44.1 300 455 17 29/32 2.4 5.29 18.0 45/64 58 2 9/32 12.7 1/2 0.9 31.8 26952
Air Inlet Thread (Pipe Tap) : NPT1/4" Air Hose Size (Inside Diameter) : 9.5mm (3/8") Fastening count is available with UTM-1500, as an option.
*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application.

POWER T OOLS G EN E R A L C ATA L O G 39

IMPACT WRENCHES
Optimal Torque of Bolt
The optimal torque of bolt is based on the clamp force achieved. The clamp force applied to bolt should not exceed 70% of the proof
load of bolt and the optimal torque applied to bolt should be as much as 60% of the proof load. See the following equation to
calculate the optimal torque.

T = k • D • N Torque = Coefficient of friction × Nominal Diameter × Clamp Force (Tension)

Property Class 4.8 5.8 6.8 8.8 10.9 12.9

Nominal Torque Proof Load Torque Proof Load Torque Proof Load Torque Proof Load Torque Proof Load Torque Proof Load
BOLT & NUT SE T T E R S

Diameter (Nm) (N) (Nm) (N) (Nm) (N) (Nm) (N) (Nm) (N) (Nm) (N)
M3 0.6 1560 0.8 1910 0.9 2210 1.2 2920 1.7 4180 2.0 4880
M4 1.4 2720 1.8 3340 2.0 3860 2.7 5100 4.0 7290 4.6 8520
M5 2.9 4400 3.6 5400 4.1 6250 5.5 8230 8.0 11800 9.4 13800
M6 4.9 6230 6.1 7640 7.0 8840 9.3 11600 13.6 16700 15.9 19500
M8 12.0 11400 14.8 13900 16.9 16100 22.5 21200 33.0 30400 38.7 35500
M10 23.7 18000 29.2 22000 33.4 25500 44.6 33700 65.4 48100 76.6 56300
M12 41.3 26100 51.0 32000 58.3 37100 77.7 48900 114.1 70000 133.5 81800
M14 65.7 35600 81.2 43700 92.7 50600 123.7 66700 181.6 95500 212.5 112000
M16 102.5 48700 126.6 59700 144.7 69100 192.9 91000 283.4 130000 331.6 152000
M18 141.0 59500 174.2 73000 199.1 84500 273.7 115000 389.8 159000 456.2 186000
M20 199.9 76000 247.0 93100 282.2 108000 388.1 147000 552.7 203000 646.8 238000
M22 272.0 93900 336.0 115000 384.0 133000 528.0 182000 751.9 252000 879.9 294000
M24 345.7 109000 427.0 134000 488.0 155000 671.0 212000 955.7 293000 1118.3 342000
M27 505.6 142000 624.6 174000 713.8 202000 981.5 275000 1397.9 381000 1635.9 445000
O-Ring
M30 686.7 174000 848.2 213000 969.4 247000 1332.9 337000 1898.4 466000 2221.6 544000
M33 934.4 215000 1154.3 264000 1319.2 305000 1813.8 416000 2583.4 576000 3023.1 673000
The torque values listed are based on the clamp force (tension) applied to hexagon metric course thread bolt and coefficient of friction 0.2 (guidance only).
Select the best tool for your application. Snap Ring

Model name of Impact Wrenches

Example UW - 6SH L K
6SH (pistol grip for 6mm bolt*) L (long anvil) K (light weight)
O-Ring
6SSH (straight handle) R (rear exhaust) ・light weight)
Retaining Pin
DK (driver type anvil
6CSH (angle head)
6AS (45 degree angle head)
*Exception: UW-140 series =14mm bolt,
ST (for stud bolt) Snap Ring UW-220 series =22mm, Spring
UW-381 series=38mm,
P (pistol grip only for UW-140・220・381 series) UW-401 series=40mm and UW-550 = 55 mm

Socket Retaining Methods

Please specify the type of Anvil when ordering.

Type "W" (W-Ring) O-Ring Type "P" (Pin) Retaining Pin Type "O" (O-Ring) O-Ring
(Only UW-61ERK
series has a
single ring type)

Snap Ring Spring Pin

Double-Hammer mechanism Swing-Hammer mechanism TORQUE CHART

Powerful & fast assembly for highest productivity Powerful & durable impacting mechanism with one To avoid excess wear of the parts,the
with well-balanced hammer mechanism and less piece Hammer-Hammer pin. tightening time is recommended not to
torque reaction to operator. Recommended forPin
Retaining Recommended to steel erection, refineries, mines,
O-Ring exceed 5 seconds.
general high-volume assembly such as motor heavy motor vehicle industries and etc.
vehicles, appliances, machinery and so forth. (UW-140P, 220P, 251P, and 381 series) TORQUE CHART
Torque
Hammer Cage 6bar
Hammer Cage
Spring Pin 5bar
Hammer Hammer
4bar

Anvil

O-Ring
Second
Anvil Hammer Cam 1S 5S

40 P OW E R TO O LS G E NE R AL C ATALO G Pin
BOLT & NUT SETTERS

RECOMMENDED TORQUE CHART OF THE IMPACT WRENCHES

Fastening force of the impact wrenches
changes in accordance to the fastening time
and the bolt size.
This table shows various common fastening Pistol type Straight type Corner type Angle type

torque. Please use this table as just guide line

when selecting the model.

BOLT & NUT SE T T E R S

UW-6CSLRK UW-6ASLRK
UW-6SLRDK UW-B6SLDK UW-6SSLRDK
UW-6SLRK UW-B6SLK UW-6SSLRK
UW-6SSRDK UW-6CSRK
UW-6SSRK
UW-6SHBRDK UW-6SSHRDK
UW-61ERK
UW-6CSHRK
UW-6SHBRK
UW-6SSHRK UW-ST6SHK UW-ST6SSHK
UW-8SHRK
UW-9CSRK
UW-9SRK UW-9SSRK UW-ST9SK
UW-10SHRK UW-ST10SHK
UW-101ERK
UW-140PL
UW-140P UW-140PR
UW-13CSK
UW-13SRK UW-13SSK
UW-131ERK
UW-161ER
UW-220P UW-220PL
UW-O22S UW-22S
UW-251P UW-251PL
5 6 7 8 9 10 20 40 60 80 100 200 400 600 800 1000 2000
5 6 7 8 9 10 20 40 60 80 100 200 400 600 800 1000 2000
Torque【Nm】
Torque【Nm】

UW-O32S UW-32SLA

UW-381 UW-381L

UW-401L

UW-401

UW-550

UW-75S

50 100 200 400 600 800 1000 2000 4000 6000 8000 10000 20000
50 100 200 400 600 800 1000 2000 4000 6000 8000 10000 20000
Torque【Nm】
Torque【Nm】
POWER T OOLS G EN E R A L C ATA L O G 41
BOLT & NUT SETTERS

IMPACT WRENCHES
The widest range of URYU Impact Wrenches offer fast, powerful and
economical operation in high-volume heavy assembly applications.
BOLT & NUT SE T T E R S

UW-61ERK UW-101ERK UW-161ER UW-6SHBRK

UW-6SLRK

UW-B6SLK UW-8SHRK UW-10SHRK UW-9SRK UW-13SRK

Built-in AIR REGULATOR FOR

Quick-change driver anvil type UW-61ERK,101ERK,131ERK,
AND UW-161ER
On pulling the sleeve, insert Set "4" at the arrow mark for strongest
or take off the bit. and "1" for weakest.
9mm

Please add "D" to each model

6.35mm name like UW-6SLRDK when
ordering.

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

SPECIFICATIONS Recommended Air Pressure:0.6MPa(85psi)

42 P OW E R TO O LS G E NE R AL C ATALO G
UW-401L（OUT-1）
UW-32SLA（OUT-SHORT）

BOLT & NUT SE T T E R S

UW-6SSLRK

UW-6SSHRK

UW-22S（SHORT）

UW-6CSHRK

UW-6CSLRK

UW-6ASLRK UW-13CSK

Head Sizes C H C H
Model Model
mm in mm in mm in mm in
UW-6CSLRK 13.5 17/32 59.5 2 11/32 UW-9CSRK 22.0 7/8 85.0 3 11/32
H

UW-6CSRK 15.0 19/32 60.0 2 23/64 UW-13CSK 26.0 11/32 102.0 4 7/32
C UW-6CSHRK 17.5 11/16 65.0 2 9/16

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Free Overall Length Sq. Drive

Capacity Weight less From Center Average Air
Speed less Socket or
Model (Nominal Bolt Size) Socket (about) to Outside (about) Consumption Code
(about) (about) Hex. Size
mm in min-1 mm in kg lb mm in mm in m3/min ft3/min
UW-6SSLRK 6 1/4 8500 239 9 13/32 0.87 1.91 31.0 1 7/32 9.5 3/8 0.30 10.5 00672
UW-6SSRK 6 1/4 7500 225 8 55/64 0.97 2.13 29.5 1 5/32 9.5 3/8 0.30 10.5 01272
UW-6SSHRK 8 5/16 7300 249 9 51/64 1.26 2.77 27.5 1 5/64 9.5 3/8 0.35 12.4 01972
UW-6CSLRK 6 1/4 8000 258 10 5/32 1.17 2.57 31.0 1 7/32 9.5 3/8 0.30 10.5 00872
UW-6CSRK 6 1/4 7300 257 10 1/8 1.42 3.12 29.5 1 5/32 9.5 3/8 0.30 10.5 01472
UW-6CSHRK 8 5/16 7300 282 11 7/64 1.71 3.76 27.5 1 5/64 9.5 3/8 0.30 10.5 02072
UW-6ASLRK 6 1/4 6500 277 10 29/32 1.14 2.50 31.0 1 7/32 9.5 3/8 0.30 10.5 00972
UW-9SSRK 10 3/8 7000 320 12 19/32 2.10 4.62 34.0 1 11/32 12.7 1/2 0.45 16.0 04272
UW-13SSK 13 1/2 6300 281 11 1/16 3.17 6.97 39.0 1 17/32 12.7 1/2 0.55 19.4 06532
UW-9CSRK 10 3/8 7000 359 14 9/64 2.78 6.11 34.0 1 11/32 12.7 1/2 0.35 12.4 04372
UW-13CSK 13 1/2 6500 374 14 23/32 5.17 11.37 39.0 1 17/32 12.7 1/2 0.75 26.5 06672
UW-6SSLRDK 6 1/4 8500 245 9 21/32 0.87 1.98 31.0 1 7/32 6.35 1/4 0.30 10.5 00772
UW-6SSRDK 6 1/4 7500 241 9 31/64 0.97 2.20 29.5 1 5/32 6.35 1/4 0.30 10.5 01372
UW-6SSHRDK 8 5/16 7300 265 10 7/16 1.26 2.75 27.5 1 5/64 6.35 1/4 0.35 12.4 01992
Air Hose Size (Inside Diameter) : 9.5mm (3/8") Air Inlet Thread : NPT1/4"

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Free
Capacity Overall Length Weight less From Center Sq. Drive Average Air
Speed
Model (Nominal Bolt Size) less Socket (about) Socket (about) to Outside (about) Shank Consumption Code
(about)
mm in min-1 mm in kg lb mm in mm in m3/min ft3/min
UW-22S 22 7/8 4000 395 15 35/64 7.90 17.41 50.0 1 31/32 19.0 3/4 0.75 26.5 08612
UW-22S(L) 22 7/8 4000 518 20 25/64 8.30 18.30 50.0 1 31/32 19.0 3/4 0.75 26.5 08662
UW-O22S 22 7/8 3800 257 10 1/8 7.65 16.80 50.0 1 31/32 19.0 3/4 0.75 26.5 08712
UW-O32S 32 1 1/4 3500 304 11 31/32 11.60 25.50 61.0 2 13/32 25.4 1 1.15 40.6 09512
UW-32SLA 32 1 1/4 3500 438 17 1/4 11.70 25.74 62.5 2 29/64 25.4 1 0.90 32.0 09112
UW-32SLA(L) 32 1 1/4 3500 583 22 61/64 12.50 27.50 62.5 2 29/64 25.4 1 0.90 32.0 09212
UW-401 38 1 1/2 3200 494 19 29/64 15.10 33.22 62.5 2 29/64 25.4 1 1.20 42.4 11362
UW-401L 38 1 1/2 3200 654 25 3/4 16.50 36.30 62.5 2 29/64 25.4 1 1.20 42.4 11172
Air Hose Size (Inside Diameter) : 12.7mm (1/2")
Air Inlet Thread : NPT3/8" for UW-22S, UW-O22S & UW-O32S NPT1/2" for UW-32SLA & UW-401

POWER T OOLS G EN E R A L C ATA L O G 43

BOLT & NUT SETTERS

IMPACT WRENCHES
SWING HAMMER SERIES
BOLT & NUT SE T T E R S

UW-140P UW-220P UW-251P

UW-381

UW-140PR
Paint color of the actual product may be different
from the images.

Head Sizes
EXTENDED ANVIL L L
Model Model
mm in mm in
L
UW-140PL 68.5 2 45/64 UW-381L 200.0 7 7/8
UW-220PL 150.0 5 29/32 UW-381PL 200.0 7 7/8
Suffix "L" to Model Name. UW-251PL 151.0 5 15/16 UW-401L 199.5 7 55/64

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Overall Weight
Free From Center Average
Capacity Length less Sq. Drive
Speed to Outside Air
Model (Nominal Bolt Size) less Socket Socket Shank Code
(about) (about) Consumption
(about) (about)
-1 3 3
mm in min mm in kg lb mm in mm in m /min ft /min
UW-140P 12 1/2 6500 200 7 7/8 2.70 5.90 33.0 1 19/64 12.7 1/2 0.70 25.0 07032
UW-140PR 12 1/2 6500 200 7 7/8 2.70 5.90 33.0 1 19/64 12.7 1/2 0.70 25.0 07242
UW-140PL 12 1/2 6800 244 9 39/64 2.80 6.10 33.0 1 19/64 12.7 1/2 0.70 25.0 07082
UW-140PRL 12 1/2 6800 244 9 39/64 2.80 6.10 33.0 1 19/64 12.7 1/2 0.70 25.0 07272
UW-220P 22 7/8 5500 230 9 1/16 4.40 9.60 42.0 1 21/32 19.0 3/4 0.70 25.0 08232
UW-220PL 22 7/8 5500 350 13 25/32 4.70 10.30 42.0 1 21/32 19.0 3/4 0.70 25.0 08252
UW-251P 25 1 5500 276 10 55/64 8.00 17.60 51.5 2 1/32 25.4 1 0.80 28.0 09122
UW-251PL 25 1 5500 395 15 35/64 8.80 19.40 51.5 2 1/32 25.4 1 0.80 28.0 09152
UW-381 38 1 1/2 4700 395 15 35/64 9.50 20.90 58.5 2 19/64 25.4 1 0.90 31.5 11612
UW-381L 38 1 1/2 4700 543 21 3/8 10.00 22.00 58.5 2 19/64 25.4 1 0.90 31.5 11632
UW-381P 38 1 1/2 4700 276 10 55/64 9.50 20.90 58.5 2 19/64 25.4 1 0.90 31.5 11652
UW-381PL 38 1 1/2 4700 425 16 47/64 10.00 22.00 58.5 2 19/64 25.4 1 0.90 31.5 11672
Air Hose Size (Inside Diameter) : 9.5mm(3/8”) for UW-140P Series, 12.7mm (1/2”) for other models above
Air Inlet Thread : NPT 1/4” for UW-140P series
NPT 3/8” for UW-220P, UW-251P Series
NPT 1/2” for UW-381 Series
UW-140P Series combine compact size and light weight with torque, 70 – 200 Nm to meet a wide range of applications. Recommendable for overall automotive servise, body shop etc.
UW-220P Series are recommendable for various popular fastening joints in general industry. (300-700Nm)
UW-251P Series are recommendable for heavy industrial production work such as engine work, truck springs, tractor pads, off-road equipment and heavy duty farm equipment.(600 –
1000Nm)
UW-381 Series are powerful, light-weight impact wrenches that are ideal for wide applications (1400 - 2000 Nm) in steel erection refineries, petrochemical plants, mines, steel mills and
heavy motor vehicle plants.

44 P OW E R TO O LS G E NE R AL C ATALO G
JUMBO TYPE IMPACT WRENCHES

Built-In Air
Regulator
Pull up the spring
loaded knob and turn
clockwise to lower the

BOLT & NUT SE T T E R S

power and
anticlockwise to
increase it, then reset.

UW-75S UW-550

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Free Overall Length Weight From Center Average

Capacity Sq. Drive
Speed less Socket less Socket to Outside Air
Model (Nominal Bolt Size) Shank Code
(about) (about) (about) (about) Consumption
-1 3 3
mm in min mm in kg lb mm in mm in m /min ft /min
UW-550 55 2 1/4 3500 525 20 43/64 36.0 79.2 78.0 3 5/64 38.1 1 1/2 2.20 79 11742
UW-75S 75 3 1400 670 26 3/8 56.0 123.0 96.0 3 25/32 44.4 1 3/4 3.20 114 12012
UW-75S (1 1/2) 76 3 1400 670 26 3/8 56.0 123.0 96.0 3 25/32 38.1 1 1/2 3.20 114 12062
Air Hose Size (Inside Diameter ) : 19.0 mm (3/4”)
Air Inlet Thread : NPT1”

STUD BOLT WRENCHES

FEATURES
Double-Hammer Auto-Reversing for
Stud Bolt Driving

UW-ST6SSHK

UW-ST6SHK

UW-ST9SK

These unique Auto-Reversing tools simply stud-bolt

driving (frequent reversing) job considerably for less
operator’ s fatigue & high productivity. Push the tool
forward to the work for driving and simply pull it back.

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Free Overall Length Weight From Center Average

Capacity Sq. Drive
Speed less Socket less Socket to Outside Air
Model (Nominal Bolt Size) Shank Code
(about) (about) (about) (about) Consumption
mm in min-1 mm in kg lb mm in mm in m3/min ft3/min
UW-ST6SHK 8 5/16 6500 171 6 47/64 1.70 3.74 28.5 1 1/8 9.5 3/8 0.40 14.0 02132
UW-ST9SK 10 3/8 6300 192 7 9/16 2.35 5.06 33.5 1 5/16 12.7 1/2 0.50 17.6 04432
UW-ST10SHK 10-12 3/8-1/2 6300 194 7 41/64 2.60 5.72 33.5 1 5/16 12.7 1/2 0.50 17.6 04472
UW-ST6SSHK 6-8 1/4-5/16 6500 235 9 1/4 1.35 2.97 28.5 1 1/8 9.5 3/8 0.40 14.0 02172
Air Hose Size (Inside Diameter) : 9.5mm (3/8")
Air Inlet Thread : NPT1/4"

POWER T OOLS G EN E R A L C ATA L O G 45

FASTENING COUNTER WITH POKA-YOKE

UTM-1500 SERIES
UTM-1500 informs you of error by display and buzzer when
all bolts are not tightened up firmly. This enables you to do
"Pokayoke" for secure tightening.
BOLT & NUT SE T T E R S

UTM-1500(PS): Pressure Sensor Incorporated type UTM-1500(CN): Connector Incorporated type

By connecting the TM signal hose from a tool to the coupler at By connecting the pressure sensor (external pressure sensor assembly)
the back of the controller, the pressure sensor incorporated in the attached to a tool to the connector at the back of controller, the
controller converts the air pressure signal into the electric signal. controller supplies the power and loads the analog signal.

FEATURES UTM-1500（RA）
：
Rack Type
• Applicable to the pneumatic tools such as the oil pulse wrenches, impact wrenches etc. (Tool should be
modified into the TM type because the controller basically detects the back pressure.)
• Counting down the fastening number, error proofing by the display and buzzer.
• Easy parameter setup the controller by front key switches followed to the front panel LCD. (It is possible
to setup the parameters through a personal computer as well.) *TM convertible model : Various kinds of
tools can be converted into TM type. Please ask your local URYU distributor for details.

[FUNCTIONS]
• Easy setup for the pressure values by the automatic setup future.
• Up to 1500 tightening time and judging data points stored.
• Each buzzer volume level of fastening recognition, panel and NOK operation adjustable.
• Work select feature available for four different works with different numbers of fasteners.
• By equipping the external input/output terminal block (free format), inter lock with the line is possible.
• Parameters receivable/ transmittable, and wave data, memory data and the total numbers of fasteners
receivable through PC.(Total numbers of pulse receivable in usage of the external pressure sensor
assembly.)
• Measurement and display of the fastening time possible for the shut off tools.
• External pressure sensor assembly equipped for UTM-1500(CN) enables to count the pulse number so
that the pulse number control becomes possible other than the fastening time control. (The pulse number
cannot be detected sometimes depending on a tool or working conditions.)
• Total maintenance determined the total numbers of fasteners or pulse possible. (external pressure sensor
assembly needed.)

Operating ambient Dimensions Weight

Model Voltage & Frequency Code(A/E)
temperature & humidity mm(in) Kg(lb)
UTM-1500A/E (PS) 2.0 (4.47) 82832/82842
115V / 230V 0 - 36 degree (no freeze) 200 × 210 × 100 (7 7/8 × 8 17/64 × 3 15/16)
50Hz / 60Hz less 90%RH (no dewfall)
UTM-1500A/E (CN) 2.0 (4.47) 82892/82902

UTM-1500A/E (RA-PS) 6.4 (14.15) 82862/82872

115V / 230V 0 - 36degree (no freeze) 280 × 220 × 420 (11 1/32 × 8 21/32 × 16 17/32)
50Hz / 60Hz less 90%RH (no dewfall) (c/w rack)
UTM-1500A/E (RA-CN) 6.4 (14.15) 82932/82942
* TM convertible model : Various kinds of tools can be converted into TM type. Please ask your local URYU distributor for details.
UTM-1500A is the 115V use, while UTM-1500E is the 230V use.

OPTION
Twin Spiral Hose Assembly
Tool Controller
Twin Spiral Hose Assembly : Please ask your local URYU Polyurethane tube
distributor for details.

Coupler Curl Hose Polyurethane tube Coupler

46 P OW E R TO O LS G E NE R AL C ATALO G
TM Tool Connection
Shut-off Tool

• UTM-1500(CN) & External Pressure Sensor Assembly • UTM-1500(RA-CN) & External Pressure Sensor Assembly
*Please place the external pressure sensor assembly to a tool as close as possible. *Same wiring as in the case of UTM-1500(CN) & External Pressure Sensor Assembly (left
In use of the pulse number count, external pressure sensor assembly should be attached figure)
near a tool handle.

BOLT & NUT SE T T E R S

Hook up Sensor Cable to
Connector at Controller’s back

Connector Incorporated Type

UTM-1500 （CN）

TM Signal Air Hose

Pressure Sensor Cable Assembly(5m)
(Part Number : 910-831-0) Connector incorporated,
External Pressure Sensor Assembly with-a-rack type
Pressure Sensor Cable Assembly(10m)
(Part Number : 878-845-1) UTM-1500 （RA-CN）
(Part Number : 910-832-0)

• UTM-1500(PS) • UTM-1500(PS) or (CN) & Relay Box Assembly

Attach TM Signal air hose to Speed Controller　AS100F-04
coupler at the controller’s （Part Number：909-449-0）
back.
Relay Box
（Part Code：909-851-0）

Pressure Sensor Incorporated Type

UTM-1500（PS）
UTM-1500
（CN）or（PS）
Polyurethane tube
Hose Joint, or F-1504
Quick exhaust （Part Number：935-350-0）
Quick exhaust
AQ240F-04-00 Polyurethane tube
（Part Number：909-442-0） F-1504
（Part Number：935-350-0）

• UBX-T(RF8) Series or BP-T(RF8) Series • UBX-T(Z) Series or BP-T(Z) Series

Power adaptor
Transmit / Receive
Transmit / Receive Transmit / Receive Transmit / Receive
TW-800R-EXP or
Herutu-made TW-800R-EXS is
receiver substitute.
TW-800R

Lighting pairing switch

Power
Switch

Fastener countor
Use UTM-1500.

Relay output exclusive cable assembly

To UTM-1500 or PLC

Non Shut-off Tool

• UTM-1500(CN)
Solenoid valve is incorporated in the rack type,
UTM-1500(RA-CN), so that you only need to
connect a tool to controller.

• UTM-1500(PS)
Referring to the right layout, please connect the
TM signal Hose(φ4) from a tool to the connector at Polyurethane tube
F-1504
the back of the controller. （Part Number：935-350-0）

S o le no id Va lve A sse m b ly（VP542）

（Part Number：911-075-0）
→Main Piping

POWER T OOLS G EN E R A L C ATA L O G 47

BOLT & NUT SETTERS

NUTRUNNERS
By transmitting the force of air motor or electric motor to output
shaft using only the reduction gear, it makes possible to suppress
noise and vibration. Also, it enables an excellent durability.
URYU Multiple Nutrunners are now very
popular in various modern industries,
BOLT & NUT SE T T E R S

especially in automobile assembly lines,

where two or more bolts or nuts must be
tightened simultaneously uniform torque.
URYU can design and manufacture the
complete machine to meet customers’
demands besides components individual
supply. Please feel free to contact local
URYU distributors.

Electric Nutrunner Air Nutrunner and minimum torque sensor

Setting Layout

*ISO 9001 is not applied to the nutrunner system

48 P OW E R TO O LS G E NE R AL C ATALO G
SCREW
DRIVERS
TORQUE CONTROL SCREWDRIVERS

CUSHION CLUTCH TYPE SCREWDRIVERS

DIRECT DRIVE SCREWDRIVERS

IMPACT SCREWDRIVERS

POWER T OOLS G EN E R A L C ATA L O G 49

SELECTION GUIDE
Joint & Torque Curve Feature Clutch Type Model A B C
Free Running Turns easily until Oil-Pulse U & UX ◎ ◎ ○
Hard Stop head seats, then Oil-Pulse UAT,ULT & UL ◎ ◎ ◎

Torque
× ○ ×

Torque
instant resistance to Impact UW & US-○○W
Torque

Torque
Torque ○ ◎ ◎

Torque
torque build-up. Torque Control US-LT series
Turns Turns
Direct Drive US-LD series ○ ○ ○
Turns Turns
Cushion Other US series ○ ○ ○
Turns Turns
Soft Stop Turns easily until Oil-Pulse U & UX ◎ ◎ ○
Oil-Pulse UAT,ULT & UL ◎ ◎ ○

Torque
Torque

head seats, Gradual

× ○ ×

Torque
Torque

Impact UW & US-○○W

Torque
Torque

resistance as material
compresses. Torque Control US-LT series ○ ◎ ◎
○ ○ ○
Turns Turns
Direct Drive US-LD series
Turns Turns
Turns Turns
Cushion Other US series ○ ○ ○
Oil-Pulse U & UX ◎ ○ ○
Torque

Torque

Self-Tapping A
Constant heavy
× ○ ×
Torque

Impact UW & US-○○W

Torque

A
Torque

Thick Material A B resistance until head

B
B seats. Then gradual Torque Control US-LT series × × ×
Turns Turns
or sudden build-up. Direct Drive US-LD series ○ ○ ○
Turns
Turns Turns
Turns Cushion Other US series ○ ○ ○
Self-Tapping Increasing resistance Oil-Pulse U, UX & UL ◎ ◎ ◎
Impact UW & US-○○W × ○ ×
Torque
SCRE W D RI VE R S

Torque

Sheet Metal
Torque

followed by easing
Torque
Torque

Torque

then sudden build-up Torque Control US-LT series × × ×

as head seats. Direct Drive US-LD series ○ ○ ○
Turns Turns
Turns
Turns Turns
Turns Cushion Other US series ○ ○ ○
Self-Tapping Constant heavy Oil-Pulse U, UX & UL ◎ ◎ ◎
Plastic resistance until head Impact UW & US-○○W × × ×
Torque
Torque

Torque
Torque

seats. Then gradual Torque Control US-LT series ○ ◎ ◎

or sudden build-up. Direct Drive US-LD series ○ ○ ○
Turns Turns
Turns
Turns
Turns
Turns
Cushion Other US series ○ ○ ○
Wood Screws Small starting resis- Oil-Pulse U & UX ○ ○ ○
tance which increases Oil-Pulse UL ◎ ◎ ◎
Torque

Torque

A
Torque
Torque

A
× × ×
Torque

A
as screw is driven in. Impact UW & US-○○W
× × ×
B B
B
Heavier resistance Torque Control US-LT series
Turns Turns
Turns when headTurns
seats. Direct Drive US-LD series ○ ◎ ◎
Turns
Cushion Other US series ○ ○ ○
L 2㎜
Remarks : A=Ergonomics B=Job Efficiency C=Torque Accuracy Recommendation : ◎=Excellent ○=Good ×=Not Recommended
3

Accessories L
L
10
2㎜
14
5㎜

Group of Tools
3 L φ6 φ3.5
5
2㎜

3 L 2㎜
A US-LT○○A/AL,US-3.5A,US-4,US-40,US-4PB
5㎜
5㎜
3 L
B US-○○W/PW,US-450WB,US-LT○○B/BL/PB,US-5,US-50,US-5PB
L
10 14
5
φ3.5 5㎜
C US-LT10B
φ6 L
10
φ3.5
14 5㎜
D US-LT30B-○○C,US-LT40B-○○C,US-3.5ACB,US-4CA,US-5CA
φ6 L
10
5
φ3.5
14
16

5 5㎜

（＋）PHILLIPS BITS
φ6 φ3.5
L
L
5
5
L
2㎜
5㎜ 6.35㎜
HEXAGONAL WRENCH BIT
L φ3.5 14 9
3 5
φ7 φ4.5
5㎜ (L) Part Number Group B, C
Group L Bit φ3.5
5
16
5 mm In No.1 No.2 No.3
φ3.5 16 5㎜
L L
10 14
16 23 6.35㎜
A φ6
L L
14φ3.5 9 4
6.35㎜
120
6.35㎜ 4 23/32 916-306-0 916-316-0 916-321-0
φ7 L φ4.5 φ4.5 6.35㎜ BIT φ7
5
14 9
5 8.5
φ7 L φ4.5 6.35㎜
14 9 12
5㎜ A 13.5
L
φ7 55
φ4.5 100 3 15/16 916-401-0 916-411-0 916-421-0
L 6.35㎜
L
φ3.5
4 5 6.35㎜ Dimensions
B 19 Part
L φ4.5
4
16 6.35㎜
A (L)
φ4.8 φ4.5 Number
L φ4.5
4
12
5
6.35㎜
75 2 61/64 916-800-0 916-810-0 916-820-0 mm in mm in
Dimensions /
Part Number 4 1/8 75 2 61/64 867-172-1
φ4.5 10.5
L 6.35㎜
L 14 9 6.35㎜
L 9 12 6.35㎜
19
φ7
φ4.5
φ4.5 5 13/64 75 2 61/64 867-176-1
C L
φ4.8 φ4.5
19 5 6.35㎜ 50 1 21/32 916-137-0 — —
5
L
φ4.8
5
φ4.5 6.35㎜
6 15/64 75 2 61/64 867-121-1
19
L 6.35㎜
φ4.8
L L 95
φ4.5
4 6.35㎜
6.35㎜

D 9
φ4.5 5
φ4.5
30 1 37/64 916-501-0 916-511-0 916-521-0
L φ4.5 6.35㎜
95
L 5 12
6.35㎜
φ4.5
9

HEXAGONAL SOCKET BITS L

9
L
5
φ4.5 6.35㎜
6.35㎜
5 19
Lφ4.5 6.35㎜
9 Dimensions
5
Lφ4.5
φ4.8 φ4.5 Part
Group Bit
6.35㎜
A B C D E
9 5 Number
5
φ4.5
5㎜
mm in mm in mm in mm in mm in
D 5 L B 6.35㎜ 5㎜
D 9 B 14
5㎜
D B 14
A

A φ4.5 14 12 15/32 100 3 15/16 4.5 11/64 8 5/16 30 1 37/64 918-109-0

5 φ3.5
C φ6 5 φ3.5
E5
A

C φ6
E 5 φ3.5
C φ6
E
L
9
6.35㎜ 16 8/5 50 1 31/32 5.5 7/32 10 25/64 15 19/32 918-259-0
6.35㎜
D
D
φ4.5 B
B 9
6.35㎜ 16 8/5 75 2 61/64 5.5 7/32 10 25/64 25 63/64 918-215-0
6.35㎜
B 5 D B 9
16 8/5 100 3 15/16 5.5 7/32 10 25/64 30 1 37/64 918-216-0
A

9
A

5 φ4.5
C φ7 16 8/5 150 5 29/32 5.5 7/32 10 25/64 30 1 37/64 918-237-0
A

E 5 φ4.5
C φ7 5 φ4.5
CE φ7
D B
E
6.35㎜ 18 45/64 100 3 15/16 7 9/32 12 15/32 30 1 37/64 918-222-0
6.35㎜
D B9 6.35㎜
D B 9
A

9
D 16 8/5 31 1 7/32 5.5 7/32 10 25/64 7 9/32 918-307-0
A

C 5 φ4.5
A

CE 5 φ4.5
C 5 φ4.5
E
E

*Please ask your local URYU distributor for other bit size.

50 P OW E R TO O LS G E NE R AL C ATALO G
SCREWDRIVERS

SELECTION CHART
Fastening force of the screwdrivers changes in
accordance to the fastening time and the bolt size.
This table shows various common fastening
torque. Please use this table as just guide line Pistol Type Push-Start Type Lever-Start Type Angle-Head Type
when selecting the model.

TORQUE-CONTROL TYPE
US-LT20A/B-26
US-LT10B
US-LT20A/B-18
US-LT20A/B-10
US-LT30A/B-23 US-LT30AL/BL-23 US-LT31PB-23
US-LT30A/B-17 US-LT30AL/BL-17 US-LT31PB-17 US-LT30B-17C

SCRE W D RI VE RS
US-LT40A/B-21 US-LT40BL-21 US-LT41PB-21
US-LT30A/B-11 US-LT30AL/BL-11 US-LT31PB-11 US-LT30B-11C
US-LT40A/B-15 US-LT40AL/BL-15 US-LT41PB-15 US-LT40B-15C
US-LT50B-17 US-LT51PB-17
0.1 0.2 0.3 0.4 0.5 1.0 2 3 4 5 10 20
US-LT40A/B-08 US-LT40BL-08 US-LT41PB-08 US-LT40B-08C US-LT40-08C(P)
Torque【Nm】
US-LT31PB-05
US-LT50B-08 US-LT51PB-08
US-LT40B-05C US-LT40-05C(P)
US-LT60P-11
US-LT60P-07
US-LT40-03C(P)
US-LT50B-05 US-LT51PB-05
US-LT60P-03
0.1 0.2 0.3 0.4 0.5 1.0 2 3 4 5 10 20
Torque【Nm】

CUSHION CLUTCH TYPE

US-3.5A US-3.5B US-3.5MA US-3.5PB

US-40
US-4 US-4PB US-4CA
US-5 US-5PB US-5CA
US-50
0.1
1.0 20.2 30.3 40.4 50.5 1.0
10 2
20 3
30 4 50
40 5 10
100 20
200
Torque【Nm】
0.1DIRECT
0.2DRIVE
0.3 TYPE
0.4 0.5 1.0 2 3 4 5 10 20
Torque【Nm】

US-3.5ACB
US-LD40P-21
US-LD40P-15
US-LD40P-08
US-LD50P-17
1.0 2 3 4 5 10 20 30 40 50 US-LD50P-08
100 200
Torque【Nm】 US-LD50P-05
0.1 0.2 0.3 0.4 0.5 1.0 2 3 4 5 10 20
Torque【Nm】

IMPACT TYPE

US-350W US-350PW
US-45W US-450WB US-450PW
US-5W US-5PW
US-6W US-6PW
US-652PW
0.1
1.0 20.2 30.3 40.4 50.5 1.0
10 2
20 3
30 4 50
40 5 10
100 20
200
Torque【Nm】

POWER T OOLS G EN E R A L C ATA L O G 51

SCREWDRIVERS

TORQUE CONTROL SCREWDRIVERS

US-LT drivers enable you to set the shut-off torque. These
small and light-weight screwdrivers contributes to reducing
operators’ fatigue and to better productivity.

US-LT10B
SCRE W D RI VE R S

US-LT20A-10 US-LT30A-17 US-LT30B-11 US-LT40A-08

US-LT50B-05 US-LT30AL-17 US-LT30BL-11

US-LT40AL-15 US-LT40BL-15 US-LT40BL-08

SPECIFICATIONS Recommended Air Pressure : 0.5MPa (72psi)

Free Overall Weight less From Center Air Hose Average

Capacity Torque Range Speed Length Bit to Outside Size Air
Model (Screw Size) Code
(Approx.) (about) (about) (about) (inside Dia.) Consumption

mm in Nm in-lbs min-1 mm in kg lb mm in mm in m3/min ft3/min

US-LT10B 2.6 No.3 0.20-0.60 1.8-5.3 1000 191 7 33/64 0.29 0.63 12.0 31/64 6.35 1/4 0.15 5.2 47362
US-LT20A-26 2.2 No.2 0.15-0.35 1.3-3.1 2600 180 7 3/32 0.34 0.68 13.0 33/64 6.35 1/4 0.16 5.6 47032
US-LT20B-26 2.2 No.2 0.15-0.35 1.3-3.1 2600 180 7 3/32 0.34 0.68 13.0 33/64 6.35 1/4 0.16 5.6 47042
US-LT20A-18 2.6 No.3 0.25-0.70 2.2-6.2 1800 180 7 3/32 0.34 0.68 13.0 33/64 6.35 1/4 0.16 5.6 47052
US-LT20B-18 2.6 No.3 0.25-0.70 2.2-6.2 1800 180 7 3/32 0.34 0.68 13.0 33/64 6.35 1/4 0.16 5.6 47062
US-LT20A-10 3 No.5 0.35-1.10 3.1-9.68 1000 180 7 3/32 0.34 0.68 13.0 33/64 6.35 1/4 0.16 5.6 47072
US-LT20B-10 3 No.5 0.35-1.10 3.1-9.68 1000 180 7 3/32 0.34 0.68 13.0 33/64 6.35 1/4 0.16 5.6 47082
US-LT30A-23 3 No.5 0.40-1.00 3.5-8.8 2300 187 7 23/64 0.43 0.94 15.5 39/64 6.35 1/4 0.20 7.0 47122
US-LT30B-23 3 No.5 0.40-1.00 3.5-8.8 2300 187 7 23/64 0.43 0.94 15.5 39/64 6.35 1/4 0.20 7.0 47132
US-LT30A-17 3.5 No.6 0.70-1.50 6.2-13.2 1700 187 7 23/64 0.43 0.94 15.5 39/64 6.35 1/4 0.20 7.0 47142
US-LT30B-17 3.5 No.6 0.70-1.50 6.2-13.2 1700 187 7 23/64 0.43 0.94 15.5 39/64 6.35 1/4 0.20 7.0 47152
US-LT30A-11 4 No.8 1.10-2.10 9.7-18.5 1100 187 7 23/64 0.43 0.94 15.5 39/64 6.35 1/4 0.20 7.0 47162
US-LT30B-11 4 No.8 1.10-2.10 9.7-18.5 1100 187 7 23/64 0.43 0.94 15.5 39/64 6.35 1/4 0.20 7.0 47172
US-LT40A-21 4 No.8 1.00-1.70 6.2-15.0 2100 209 8 15/64 0.65 1.43 16.5 41/64 6.35 1/4 0.30 10.5 47222
US-LT40B-21 4 No.8 1.00-1.70 6.2-15.0 2100 209 8 15/64 0.65 1.43 16.5 41/64 6.35 1/4 0.30 10.5 47232
US-LT40A-15 4 No.8 1.00-2.20 6.2-19.4 1500 209 8 15/64 0.65 1.43 16.5 41/64 6.35 1/4 0.30 10.5 47242
US-LT40B-15 4 No.8 1.00-2.20 6.2-19.4 1500 209 8 15/64 0.65 1.43 16.5 41/64 6.35 1/4 0.30 10.5 47252
US-LT40A-08 5 No.10 1.60-4.00 14.1-35.2 800 209 8 15/64 0.65 1.43 16.5 41/64 6.35 1/4 0.30 10.5 47262
US-LT40B-08 5 No.10 1.60-4.00 14.1-35.2 800 209 8 15/64 0.65 1.43 16.5 41/64 6.35 1/4 0.30 10.5 47272
US-LT50B-17 4-5 No.8-No.10 1.50-2.60 9.7-23.0 1700 240 9 29/64 1.00 2.20 19.5 49/64 9.50 3/8 0.50 17.5 44422
US-LT50B-08 5-6 No.10-1/4 3.00-5.50 26.4-48.4 800 240 9 29/64 1.00 2.20 19.5 49/64 9.50 3/8 0.50 17.5 44432
US-LT50B-05 5-6 No.10-1/4 5.00-10.5 44.0-92.4 480 240 9 29/64 1.00 2.20 19.5 49/64 9.50 3/8 0.50 17.5 44442
US-LT30AL-23 3 No.5 0.40-1.00 3.52-8.8 2300 229 8 15/64 0.53 1.16 15.0 19/32 6.35 1/4 0.20 5.2 46622
US-LT30BL-23 3 No.5 0.40-1.00 3.52-8.8 2300 229 8 15/64 0.53 1.16 15.0 19/32 6.35 1/4 0.20 5.2 46632
US-LT30AL-17 3.5 No.6 0.70-1.50 6.2-13.2 1700 229 8 15/64 0.53 1.16 15.0 19/32 6.35 1/4 0.20 5.2 46642
US-LT30BL-17 3.5 No.6 0.70-1.50 6.2-13.2 1700 229 8 15/64 0.53 1.16 15.0 19/32 6.35 1/4 0.20 5.2 46652
US-LT30AL-11 4 No.6 1.10-2.10 9.7-18.5 1100 229 8 15/64 0.53 1.16 15.0 19/32 6.35 1/4 0.20 5.2 46662
US-LT30BL-11 4 No.6 1.10-2.10 9.7-18.5 1100 229 8 15/64 0.53 1.16 15.0 19/32 6.35 1/4 0.20 5.2 46672
US-LT40BL-21 4 No.8 1.00-1.70 8.8-15.0 2100 249 9 25/32 0.70 1.54 17.0 21/32 6.35 1/4 0.30 5.6 46732
US-LT40AL-15 4 No.8 1.00-2.20 8.8-19.4 1500 249 9 25/32 0.70 1.54 17.0 21/32 6.35 1/4 0.30 5.6 46742
US-LT40BL-15 4 No.8 1.00-2.20 8.8-19.4 1500 249 9 25/32 0.70 1.54 17.0 21/32 6.35 1/4 0.30 5.6 46752
US-LT40BL-08 5 No.10 1.60-4.00 14.1-35.2 800 249 9 25/32 0.70 1.54 17.0 21/32 6.35 1/4 0.30 5.6 46772
Air Inlet Size : NPT1/8" for US-LT10/20 series
NPT1/4" for US-LT30/40/50 series
Hex. Size of Bit : 5mm (13/64") for A-Type
6.35mm (1/4") for B-Type

52 P OW E R TO O LS G E NE R AL C ATALO G
US-LT60P(P) Series
Optional 9.5mm (3/8") Sq. Drive Anvil is
alternatively available. Suffix each model
name with (P) as US-LT60P-03(P) or -07(P)
when ordering.

US-LT51PB-05

Torque reaction bar should be attached for

SCRE W D RI VE RS
US-LT31PB-05 solid support to absorb the reaction when
US-LT60P-03 the tool comes to stall.

SPECIFICATIONS Recommended Air Pressure : 0.5MPa (72psi)

Free Overall Weight less From Center Air Hose Average

Capacity Torque Range Speed Length Bit to Outside Size Air
Model (Screw Size) Code
(Approx.) (about) (about) (about) (inside Dia.) Consumption
-1 3 3
mm in Nm in-lbs min mm in kg lb mm in mm in m /min ft /min
US-LT31PB-23 2.6 No.3 0.40-1.00 3.5-8.8 2300 170 7 1/64 0.71 1.56 16.0 39/64 6.35 1/4 0.20 7.0 44222
US-LT31PB-17 2.2 No.2 0.70-1.50 6.2-13.2 1700 170 7 1/64 0.71 1.56 16.0 39/64 6.35 1/4 0.20 7.0 44232
US-LT31PB-11 2.6 No.3 1.10-2.10 9.7-18.5 1100 170 7 1/64 0.71 1.56 16.0 39/64 6.35 1/4 0.20 7.0 44242
US-LT31PB-05 3 No.5 2.40-5.00 21.1-44.0 500 189 8 3/16 0.85 1.87 16.0 39/64 6.35 1/4 0.20 7.0 44252
US-LT41PB-21 3 No.5 1.00-1.70 8.8-15.0 2100 175 7 23/32 0.87 1.91 17.0 41/64 6.35 1/4 0.30 10.5 44332
US-LT41PB-15 3.5 No.6 1.00-2.20 8.8-19.4 1500 175 7 23/32 0.87 1.91 17.0 41/64 6.35 1/4 0.30 10.5 44342
US-LT41PB-08 4 No.8 1.60-4.00 14.1-35.2 800 175 7 23/32 0.87 1.91 17.0 41/64 6.35 1/4 0.30 10.5 44352
US-LT51PB-17 4 No.8 1.50-2.60 13.2-22.9 1700 198 8 35/64 1.20 2.64 20.0 49/64 9.50 3/8 0.50 17.5 44562
US-LT51PB-08 4 No.8 3.00-5.50 26.4-48.4 800 198 8 35/64 1.20 2.64 20.0 49/64 9.50 3/8 0.50 17.5 44572
US-LT51PB-05 5 No.10 5.00-10.5 44.0-92.4 480 198 8 35/64 1.20 2.64 20.0 49/64 9.50 3/8 0.50 17.5 44582
US-LT60P-11 4-5 No.8-No.10 4.00-7.00 35.2-61.6 1100 230 9 1/16 1.70 3.74 22.0 57/64 9.50 3/8 0.60 21.0 49902
US-LT60P-07 5-6 No.10-1/4 4.00-10.0 35.2-88.0 650 230 9 1/16 1.70 3.74 22.0 57/64 9.50 3/8 0.60 21.0 49932
US-LT60P-03 5-6 No.10-1/4 7.00-20.0 61.6-176 320 230 9 1/16 1.70 3.74 22.0 57/64 9.50 3/8 0.60 21.0 49962
Air Inlet Size : NPT1/4" Hex. Size of Bit : 6.35mm (1/4")

US-LT40B-05C US-LT40-03C（P）

SPECIFICATIONS Recommended Air Pressure : 0.5MPa (72psi)

Free Overall Weight less From Center Air Hose Average

Capacity Torque Range Speed Length Bit to Outside Size Air
Model (Screw Size) Code
(Approx.) (about) (about) (about) (inside Dia.) Consumption
-1 3 3
mm in Nm in-lbs min mm in kg lb mm in mm in m /min ft /min
US-LT30B-17C 2.6 No.3 0.70-1.50 6.2-13.2 1700 295 10 3/4 0.70 1.54 36.0 1 27/64 6.35 1/4 0.20 7.0 46932
US-LT30B-11C 2.2 No.2 1.10-2.10 9.7-18.5 1100 295 10 3/4 0.70 1.54 36.0 1 27/64 6.35 1/4 0.20 7.0 46952
US-LT40B-15C 2.6 No.3 1.00-2.20 8.8-19.4 1500 314 12 25/32 0.90 1.98 36.0 1 27/64 6.35 1/4 0.30 10.5 46152
US-LT40B-08C 3 No.5 1.60-4.00 14.1-35.2 800 314 12 25/32 0.90 1.98 36.0 1 27/64 6.35 1/4 0.30 10.5 46162
US-LT40B-05C 3 No.5 2.30-5.70 20.2-50.2 500 325 13 7/32 0.95 2.09 38.5 1 33/64 6.35 1/4 0.30 10.5 46132
US-LT40-08C(P) 3.5 No.6 1.60-4.00 14.1-35.2 800 314 12 25/32 0.90 1.98 32.0 1 17/64 6.35 1/4 0.30 10.5 46192
US-LT40-05C(P) 4 No.8 2.30-5.70 20.2-50.2 500 325 13 7/32 0.95 2.09 35.5 1 25/64 6.35 1/4 0.30 10.5 46182
US-LT40-03C(P) 4 No.8 5.00-10.0 44-88 300 359 14 11/64 1.10 2.42 35.5 1 25/64 6.35 1/4 0.30 10.5 46172
Air Inlet Size : NPT1/4" Hex. Size of Bit : 6.35mm (1/4") for B-Type Sq Size of Anvil : 6.35mm (1/4") for US-LT40 Series

OPTION
US-LT20-40 Series Optional Parts
Silencer Assembly Handle Jacket
Detachable Silencer Assembly to minimize Rubber Handle Jacket is available
noise can be attached for more as an optional accessory for
comfortable working environment. operator’s comfort.

US-LT20 Series　455-088-2 US-LT20　470-083-9

US-LT30 Series　408-088-2 US-LT30　471-083-7
US-LT40 Series　496-088-1 US-LT40　496-083-0

POWER T OOLS G EN E R A L C ATA L O G 53

SCREWDRIVERS

CUSHION CLUTCH TYPE SCREWDRIVERS

US-4 US-5PB

US-40

US-5CA
SCRE W D RI VE R S

US-3.5ACB

Cutaway view of Magnet type

FEATURES head for US-3.5MA Head Sizes

H
The output torque Adjusting Nut
can be adjusted by Bit
C
(Automatically
turning the adjusting magnetized)
nut to control spring C H
Model
compression or by mm in mm in
changing the Magnetic Bar
US-3.5ACB 10.0 25/64 36.5 1 33/64
suitable spring. Adjusting Spring US-4CA 12.0 15/32 45.0 1 25/32
The standard bit contacts the bult-in Magnetic
US-5CA 12.0 15/32 45.0 1 25/32
Bar to be magnetized and holds the screw.

SPECIFICATIONS Recommended Air Pressure : 0.4MPa (57psi)

Free Overall Weight less From Center Hex. Average

Capacity Air Hose
Speed Length Socket or Bit to Outside Size of Air
Model （Screw Size）（Approx.） Size Code
（about） (about) (about) Bit Consumption
mm in min-1 mm in kg lb mm in mm in mm in m3/min ft3/min
US-3.5A 4 No.8 2000 196 7 23/32 0.60 1.32 17.0 43/64 5.00 13/64 6.35 1/4 0.20 7.0 41012
US-3.5B 4 No.8 2000 214 8 27/64 0.63 1.39 17.0 43/64 6.35 1/4 6.35 1/4 0.20 7.0 41412
US-4 4 No.8 1400 236 9 19/64 0.95 2.09 20.0 25/32 5.00 13/64 6.35 1/4 0.20 7.0 41812
US-5 5 No.10 1400 236 9 19/64 1.10 2.42 21.0 53/64 6.35 1/4 6.35 1/4 0.20 7.0 43012
Air Inlet Size : NPT1/4"

SPECIFICATIONS Recommended Air Pressure : 0.4MPa (57psi)

Free Overall Weight less From Center Hex. Average

Capacity Air Hose
Speed Length Socket or Bit to Outside Size of Air
Model （Screw Size）（Approx.） Size Code
（about） (about) (about) Bit Consumption
-1
mm in min mm in kg lb mm in mm in mm in m3/min ft3/min
US-3.5MA 4 No.8 2000 198 5 1/64 0.65 1.43 17.0 43/64 6.35 1/4 6.35 1/4 0.20 7.0 41112
Air Inlet Size : NPT1/4"

SPECIFICATIONS Recommended Air Pressure : 0.4MPa (57psi)

Free Overall Weight less From Center Hex. Average

Capacity Air Hose
Speed Length Socket or Bit to Outside Size of Air
Model （Screw Size）（Approx.） Size Code
（about） (about) (about) Bit Consumption
mm in min-1 mm in kg lb mm in mm in mm in m3/min ft3/min
US-40 4 No.8 2200 225 8 55/64 0.56 1.23 17.0 43/64 5.00 13/64 6.35 1/4 0.20 7.0 48702
US-50 5 No.10 1200 245 9 41/64 0.90 1.98 18.0 45/64 6.35 1/4 6.35 1/4 0.30 10.7 49612
Air Inlet Size : NPT1/4"

SPECIFICATIONS Recommended Air Pressure : 0.4MPa (57psi)

Free Overall Weight Less From Center Air Hex. Average

Capacity Speed Length Bit to Outside Inlet Size of Air
Model （Screw Size）（Approx.） Code
（about） (about) (about) Size Bit Consumption
mm in min-1 mm in kg lb mm in in mm in m3/min ft3/min
US-3.5PB 4 No.8 2000 200 7 7/8 0.75 1.65 17.0 43/64 NPT1/4 6.35 1/4 0.20 7.0 41712
US-4PB 4 No.8 1400 223 8 25/32 1.15 2.53 20.0 25/32 NPT1/4 5.00 13/64 0.20 7.0 42012
US-5PB 5 No.8 1400 242 9 17/32 1.30 2.86 21.0 33/64 NPT1/4 6.35 1/4 0.20 7.0 43212
* US-3.5ACB 4 No.8 2000 200 7 7/8 0.65 1.43 10.0 25/64 NPT1/4 6.35 1/4 0.20 7.0 41242
US-4CA 4 No.8 1400 225 8 55/64 1.10 2.24 12.0 15/32 NPT1/4 6.35 1/4 0.30 10.7 42212
US-5CA 5 No.10 500 256 10 5/64 1.40 3.08 12.0 15/32 NPT1/4 6.35 1/4 0.30 10.7 43412
*US-3.5ACB is not the cushion clutch type but the direct drive type. Air Hose Size (Inside Diameter) : 6.35mm (1/4")

54 P OW E R TO O LS G E NE R AL C ATALO G
SCREWDRIVERS

DIRECT DRIVE SCREWDRIVERS

Up for
reversing

Down for
forwarding

Up for
forwarding

SCRE W D RI VE RS
US-LD50P-17 Down for
reversing
US-LD40P-21 By replacing Reverse Lever,
Operator can use either left
or right hand.

SPECIFICATIONS Recommended Air Pressure : 0.5MPa (72psi)

Torque Range Free Overall Weight Less From Center Average

Capacity Speed Length Bit to Outside Air
Model (Screw Size) Code
Soft Joint Hard Joint (about) (about) (about) (about) Consumption
-1 3 3
mm in Nm ft-lbs Nm ft-lbs min mm in kg lb mm in m /min ft /min
US-LD40P-21 4 No.8 2.0 1.5 2.8 2.1 2500 130 5 1/14 0.7 1.54 17.0 43/64 0.40 14.0 42522
US-LD40P-15 4 No.8 3.0 2.2 3.2 2.4 1700 130 5 1/14 0.7 1.54 17.0 43/64 0.40 14.0 42532
US-LD40P-08 5 No.10 4.8 3.6 5.7 4.2 940 130 5 1/14 0.7 1.54 17.0 43/64 0.40 14.0 42542
US-LD50P-17 4 No.8 3.5 2.6 5.9 4.4 1900 150 5 29/32 0.9 2.01 20.0 49/64 0.50 17.5 42622
US-LD50P-08 5 No.10 6.5 4.8 7.8 5.8 900 153 6 1/32 0.9 2.01 20.0 49/64 0.50 17.5 42632
US-LD50P-05 5 No.10 10.0 7.4 11.2 8.3 500 153 6 1/32 0.9 2.01 20.0 49/64 0.50 17.5 42642
Air Inlet Size : NPT1/4" Air Hose Size : 6.35mm (1/4") Hex.Size of Bit : 6.35mm (1/4")

POWER T OOLS G EN E R A L C ATA L O G 55

SCREWDRIVERS

IMPACT SCREWDRIVERS
Small, light-weight, and high power. Operators’ fatigue can
be reduced thanks to discontinuous drive which has less
torque reaction.

US-450WB

US-5W
SCRE W D RI VE R S

US-350W
US-6W

US-45W

SPECIFICATIONS (STRAIGHT TYPE)

Free Overall Weight Less From Center Hex. Air Hose Average Recommended
Capacity Speed Length Bit to Outside Size of Size Air Air
Model （Screw Size）（Approx.） Code
（about） (about) (about) Bit (inside Dia) Consumption Pressure

mm in min-1 mm in kg lb mm in mm in mm in m3/min ft3/min Mpa psi

US-350W 4 No.8 14000 168 6 5/8 0.40 0.88 17.0 43/64 6.35 1/4 6.35 1/4 0.20 7.0 0.4 57 40952
US-450WB 5 No.10 11000 161 6 5/16 0.55 1.21 18.5 47/64 6.35 1/4 6.35 1/4 0.20 7.0 0.4 57 43832
US-45W 5 No.10 12000 183 7 13/64 0.50 1.10 17.0 43/64 6.35 1/4 6.35 1/4 0.20 7.0 0.4 57 44612
US-5W 5 No.10 9500 198 7 51/64 0.80 1.60 20.0 27/32 6.35 1/4 6.35 1/4 0.20 7.0 0.4 57 43912
US-6W 6 1/4 9500 187 7 23/64 0.80 1.76 22.5 57/64 6.35 1/4 6.35 1/4 0.30 10.5 0.4 57 47612
Air Inlet Size : NPT1/4"

US-450PW US-5PW

US-350PW

US-6PW US-652PW

SPECIFICATIONS (PISTOL TYPE)

mm in min-1 mm in kg lb mm in mm in mm in m3/min ft3/min Mpa psi

US-350PW 4 No.8 15000 121 4 49/64 0.53 1.16 17.0 43/64 6.35 1/4 6.35 1/4 0.20 7.0 0.4 57 40972
US-450PW 5 No.10 14000 151 5 15/16 0.75 1.65 17.0 43/64 6.35 1/4 6.35 1/4 0.20 7.0 0.4 57 45302
US-5PW 5 No.10 9500 168 6 5/8 0.95 2.10 20.0 25/32 6.35 1/4 6.35 1/4 0.30 10.5 0.4 57 44012
US-6PW 6 1/4 9500 170 6 11/16 1.00 2.20 23.0 57/64 6.35 1/4 6.35 1/4 0.30 10.5 0.4 57 47662
US-652PW 6 1/4 9000 155 6 7/64 0.85 1.87 23.0 15/16 6.35 1/4 6.35 1/4 0.35 12.4 0.5 72 48082
Air Inlet Size : NPT1/4"

56 P OW E R TO O LS G E NE R AL C ATALO G
MEMO

POWER T OOLS G EN E R A L C ATA L O G 57

ABRASIVE
TOOLS
GRINDERS

SANDERS

POLISHERS

58 P OW E R TO O LS G E NE R AL C ATALO G
ABRASIVE TOOLS

DIE GRINDERS
Self-Locking Lever attachment
To prevent accidental start of motor.

UG-25NA
UG-38N

UG-38NL UG-38NA

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Collet Max.Free Rated Overall Weight Air Inlet Air Hose Average COLLET CHUCKS
Chuck Speed Horse Length less wheel Thread Air Code
Model Size G-38EB & UG-50S-200
Size (about) Power （about） (about) (Pipe Tap) Consumption
mm in min-1
w mm in kg lb in 3
mm in m /min ft /min 3
6mm 1/4" 42mm (1 21/32)
UG-25NA 6 1/4 23500 210 153 6 1/32 0.51 1.12 NPT1/4 9.5 3/8 0.3 10.7 50062 50072
G-38EB 6 1/4 20000 315 160 6 19/64 0.58 1.28 NPT1/4 9.5 3/8 0.4 14.0 50442 50452
UG-38N 6 1/4 25000 315 163 6 27/64 0.57 1.25 NPT1/4 9.5 3/8 0.4 14.0 50512 50412
UG-38NA 6 1/4 22000 315 164 6 29/64 0.63 1.39 NPT1/4 9.5 3/8 0.4 14.0 50562 50552
923-534-0 3mm
UG-38NL 6 1/4 21000 315 316 12 7/16 0.93 2.05 NPT1/4 9.5 3/8 0.4 14.0 50712 50722
3/8"-24 923-535-0 6mm
UG-50S-200 6 1/4 23000 195 198 7 51/64 0.60 1.32 NPT1/4 9.5 3/8 0.4 14.0 50842 50852
Chuck Nut Chuck 923-536-0 1/4"
* Please never mount Grinding Wheel whose diameter is 50mm and larger.

COLLET CHUCKS

ABRA SIVE T O O L S
UG-25N Series
30mm (1 3/16)

UG-38NSA UG-38NS
Chuck 6mm 923-003-0
SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi) Chuck 3mm 923-001-0
Chuck 1/4" 923-006-0
Collet Max.Free Rated Overall Weight Air Inlet Air Hose Average
Chuck Speed Horse Length less wheel Thread Air Code Collet Chuck Spindle
Model Size
Size (about) Power （about） (about) (Pipe Tap) Consumption
UG-38N Series Chuck Assembly（Chuck＋Chuck Nut）
mm in min-1 w mm in kg lb in mm in m3/min ft3/min 6mm 1/4" 47mm (1 55/64)
UG-25NSA 6 1/4 23500 210 150 5 29/32 0.58 1.28 NPT1/4 9.5 3/8 0.3 10.7 50162 50152
UG-38NS 6 1/4 25000 315 173 6 13/16 0.59 1.30 NPT1/4 9.5 3/8 0.4 14.0 50612 50662
Chuck Assembly 6mm 923-512-0
UG-38NSA 6 1/4 22000 315 174 6 27/32 0.64 1.41 NPT1/4 9.5 3/8 0.4 14.0 50702 -
Chuck Assembly 3mm 923-510-0
UG-38NSL 6 1/4 21000 315 327 12 7/8 0.94 2.07 NPT1/4 9.5 3/8 0.4 14.0 50762 50782
Chuck Assembly 1/4" 923-516-0
* Please never mount Grinding Wheel whose diameter is 50mm and larger. Chuck Nut Chuck

UMG-450
UG-45H Fasten the collet
chuck firmly to
SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi) avoid loosening
of the cutting tool.
Collet Max.Free Rated Overall Weight Air Inlet Average
Chuck Speed Horse Length less wheel Thread Air Hose Air COLLET CHUCKS
Model Size Code
Size (about) Power （about） (about) (Pipe Tap) Consumption
UG-45H
mm in min-1 w mm in kg lb in mm in m3/min ft3/min
UMG-450 3 No.5 43000 37 144 5 43/64 0.80 1.76 NPT1/8 4.8 3/16 0.3 10.7 58712 923-170-0 6mm
UG-45H 6 1/4 18000 375 196 7 23/62 0.75 1.65 NPT1/4 9.5 3/8 0.6 22.0 51632 923-171-0 1/4"
923-172-0 8mm
* Please never mount Grinding Wheel whose diameter is 50mm and larger.

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

C H
Collet Max.Free Rated Overall Weight Air Inlet Average Model
Chuck Speed Horse Length less wheel Thread Air Hose mm in mm in
Air
Model Size Code
Size (about) Power （about） (about) (Pipe Tap) Consumption
UG-50S-200A 19.5 49/64 87.0 3 27/64
mm in min-1 w mm in kg lb in mm in m3/min ft3/min
H
H

UG-50S-200A 6 1/4 20000 195 195 7 45/64 0.90 1.98 NPT1/4 9.5 3/8 0.4 14.0 50862
* Please never mount Grinding Wheel whose diameter is 50mm and larger.
C C

POWER T OOLS G EN E R A L C ATA L O G 59

ABRASIVE TOOLS

GRINDERS

UG-650E
UG-65E
Collet chucks of 6mm and 1/4" capacity are
57㎜
available as optional accessories for mandrel
mounted abrasives, cutters and files. 3
／8"-24

6mm 1/4"
UNF3/8-24 923-530-0 923-532-0
W3/8-16 923-523-0 923-526-0 Collet Chuck
Collet Nut

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Max.Free Rated Overall Weight Air Inlet Average

Capacity Air Hose
Throttle Speed Horse Length less wheel Thread Air
Type Model (Wheel Size) Size Code
Handle (about) Power （about） (about) (Pipe Tap) Consumption
mm in min-1 w mm in kg lb in mm in m3/min ft3/min
UG-65E Sleeve 63.5 2 1/2 14600 412 242 9 27/32 1.25 2.75 NPT1/4 9.5 3/8 0.6 22 50912
Standard UG-65ER Self-closing 63.5 2 1/2 14600 412 271 10 43/64 1.50 3.30 NPT1/4 9.5 3/8 0.6 22 50902
UG-65EL Lever 63.5 2 1/2 14600 412 272 10 23/32 1.40 3.08 NPT1/4 9.5 3/8 0.6 22 50922
UG-65EB Sleeve 63.5 2 1/2 *14600 412 242 9 27/32 1.25 2.75 NPT1/4 9.5 3/8 0.6 22 50962
A BRA SIVE T O O L S

Rear UG-65EBR Self-closing 63.5 2 1/2 *14600 412 271 10 43/64 1.50 3.30 NPT1/4 9.5 3/8 0.6 22 50972
Exhaust
UG-65EBL Lever 63.5 2 1/2 *14600 412 272 10 23/32 1.40 3.08 NPT1/4 9.5 3/8 0.6 22 50982
UG-650E Sleeve 63.5 2 1/2 14600 412 390 15 23/64 1.72 3.78 NPT1/4 9.5 3/8 0.6 22 50942
Extended UG-650ER Self-closing 63.5 2 1/2 14600 412 419 16 1/2 1.97 4.33 NPT1/4 9.5 3/8 0.6 22 50932
UG-650EL Lever 63.5 2 1/2 14600 412 420 16 17/32 1.55 3.41 NPT1/4 9.5 3/8 0.6 22 51132
* Speed without silencer

USG-4S AG-50L AG-100S

"OUT" type "IN" type
3/8"-24 Spindle with large FLANGE URYU special Spindle with small FLANGE
WHEEL SIZE
Wrench Wrench
Backing Flange Backing Flange Model Thickness Height
Grinding Wheel or AG-50 Series 3-5mm 9mm
Grinding Wheel or Rubber Pad for
Rubber Pad for sanding. AG-100 Series 4-6mm 10mm
sanding. Setting Bolt USG-4S 4-6mm 10mm
Retaining Nut Retaining Nut
Allen Head Screw Allen Wrench
USG-7S 6-8mm 13mm
T

Allen Wrench USG-L180D 6-8mm 13mm

Pin Head Spanner

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Max.Free Rated Overall Weight Type Air Inlet Average

Capacity Overall Height Air Hose
Speed Horse Length less wheel of Thread Air
Model (Wheel Size) (about) Size Code
(about) Power （about） (about) Spindle (Pipe Tap) Consumption
-1 3 3
mm in min w mm in mm in kg lb in mm in m /min ft /min
AG-50(OUT) 50 2 15000 337 147 5 25/32 54 2 1/2 0.63 1.40 OUT NPT1/4 9.5 3/8 0.45 16.0 53622
AG-50L(OUT) 50 2 15000 337 140 5 34/64 54 2 1/2 0.63 1.40 OUT NPT1/4 9.5 3/8 0.45 16.0 53632
AG-100L(IN) 100 4 13500 315 179 7 3/64 68 2 43/64 1.05 2.30 IN NPT1/4 9.5 3/8 0.50 18.0 53932
AG-100L(OUT) 100 4 13500 315 179 7 3/64 68 2 43/64 1.05 2.30 OUT NPT1/4 9.5 3/8 0.50 18.0 53972
AG-100S(IN) 100 4 13500 315 175 6 57/64 68 2 43/64 1.00 2.20 IN NPT1/4 9.5 3/8 0.50 18.0 53902
AG-100SL(IN) 100 4 13500 315 179 7 3/64 68 2 43/64 1.10 2.40 IN NPT1/4 9.5 3/8 0.50 18.0 53912
AG-100S(OUT) 100 4 13500 315 179 7 3/64 68 2 43/64 1.00 2.20 OUT NPT1/4 9.5 3/8 0.50 18.0 53942
AG-100SL(OUT) 100 4 13500 315 179 7 3/64 68 2 43/64 1.10 2.40 OUT NPT1/4 9.5 3/8 0.50 18.0 53952
USG-4S 100 4 13500 450 236 9 19/64 94 3 45/64 1.65 3.60 IN NPT1/4 9.5 3/8 0.60 22.0 55462
USG-7S 180 7 7600 962 296 11 21/32 120 4 47/54 3.00 6.60 IN NPT3/8 12.7 1/2 1.30 46.0 57312
USG-L180D 180 7 7600 888 267 9 1/2 92 3 5/8 2.70 5.90 IN NPT3/8 12.7 1/2 1.00 36.0 54452

60 P OW E R TO O LS G E NE R AL C ATALO G
ABRASIVE TOOLS

VERTICAL GRINDERS

UVG-1800SL-84

UVG-2300SL-59

ABRA SIVE T O O L S
Paint color of the actual product may be different
from the images.
USG-4VL USG-5VLA

100mm(4") & 125mm(5") Type

USG series * These gear-less vertical grinders of simple non-governed design offer
powerful and trouble free operation.

180mm(7") & 230mm(9") Type

UVG series * Non-friction speed control governor incorporated with over-speed sensing
device. This special governor contributes to power compensation also
especially when grinding resistance gets strong causing slow speed.
* Three different speeds are available for UVG-1800.
* UVG-2300 series is equipped with Dual and Consecutive action Speed
Piston Valve for smooth valve opening. UVG SERIES
NON-FRICTION SPEED CONTROL
GOVERNOR incorporated in OVERSPEED
SENSING DEVICE

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Max.Free Rated Overall Weight Type Air Inlet Average

POWER T OOLS G EN E R A L C ATA L O G 61

ABRASIVE TOOLS

ANGLE GRINDERS

LOCK BUTTON
UAG-40SBL-136 Push the spring-loaded Lock Button to release
the Throttle Lever for operation.
When released the Lever is locked automatically.

Lock Button Spring

Push to release Throttle

the Throttle Lever Lever

UAG-70SBL-76
ROLL TYPE THROTTLE HANDLE

UAG-50SBL-120
A BRA SIVE T O O L S

UAG-○○SB series
UAG-○○SC series
UAG-90SBL-59

100mm-230mm(4"-9") Wheel Dia.

URYU offers UAG-series Angle Grinders of 100mm(4"), 125mm(5"), 180mm(7") and 230mm(9") capacity.
These governed lightweight and compact grinders deliver high power to weight ratio and feature.
• Non-friction Speed Governor for most efficient grinding performance.
• Unique spring-loaded Exhaust Valve for noise-less trouble free operation.
• Vibration absorbent Dead Handle for less Operator fatigue.
Spring-loaded EXHAUST VALVE
This exhaust hole is kept closed off-
“B”type “C”type operation but is opened upon triggering.
Spindle with large Flange URYU unique Spindle with small Flange This unique exhaust valve features:
• Cutting exhaust noise especially when air
is shut off.
• Preventing
foreign matters
inhalation into
the tool.

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Max.Free Rated Overall Weight Type Air Inlet Average

Capacity Overall Height Air Hose
Speed Horse Length less wheel of Thread Air
Model (Wheel Size) (about) Size Code
(about) Power （about） (about) Spindle (Pipe Tap) Consumption

mm in min-1 w mm in mm in kg lb in mm in m3/min ft3/min

UAG-40SB-136 100 4 13600 712 208 8 3/16 76 3 1.5 3.3 OUT NPT1/4 9.5 3/8 0.95 34.0 59622
UAG-40SBL-136 100 4 13600 712 246 9 11/16 76 3 1.3 2.9 OUT NPT1/4 9.5 3/8 0.95 34.0 59632
UAG-40SC-136 100 4 13600 712 208 8 3/16 76 3 1.5 3.3 IN NPT1/4 9.5 3/8 0.95 34.0 59662
UAG-40SCL-136 100 4 13600 712 246 9 11/16 76 3 1.3 2.9 IN NPT1/4 9.5 3/8 0.95 34.0 59672
UAG-50SBL-120 125 5 12000 712 246 9 11/16 76 3 1.4 3.1 OUT NPT1/4 9.5 3/8 0.95 34.0 59702
UAG-50SCL-120 125 5 12000 712 246 9 11/16 76 3 1.4 3.1 IN NPT1/4 9.5 3/8 0.95 34.0 59752
UAG-50SC-120 125 5 12000 712 208 8 3/16 76 3 1.6 3.5 IN NPT1/4 9.5 3/8 0.95 34.0 59802
UAG-50SB-109 125 5 10900 712 208 8 3/16 76 3 1.6 3.5 OUT NPT1/4 9.5 3/8 0.95 34.0 59722
UAG-50SBL-109 125 5 10900 712 246 9 11/16 76 3 1.4 3.1 OUT NPT1/4 9.5 3/8 0.95 34.0 59732
UAG-70SBL-76 180 7 7600 1500 300 11 13/16 98 3 55/64 2.9 6.4 OUT NPT3/8 12.7 1/2 1.60 57.0 59132
UAG-70SB-76 180 7 7600 1500 253 10 98 3 55/64 3.0 6.6 OUT NPT3/8 12.7 1/2 1.60 57.0 59122
UAG-70SC-76 180 7 7600 1500 253 10 87 3 27/64 3.0 6.6 IN NPT3/8 12.7 1/2 1.60 57.0 59162
UAG-70SCL-76 180 7 7600 1500 300 11 13/16 87 3 27/64 2.8 6.2 IN NPT3/8 12.7 1/2 1.60 57.0 59172
UAG-90SBL-59 230 9 5900 1875 308 12 1/8 98 3 55/64 3.3 7.3 OUT NPT3/8 12.7 1/2 1.90 67.0 59332

62 P OW E R TO O LS G E NE R AL C ATALO G
ABRASIVE TOOLS

HORIZONTAL GRINDERS

UG-1250L-72

UG-1250-72

ABRA SIVE T O O L S
UG-1500L-60

UG-1500-60

Heavy-Duty Type (Governed) WHEEL SIZE

• Two speeds are available for UG-1500 series.
(Higher speed for resinoid wheels and lower speed for vitrified wheels) Model Name Thickness
• Two different Throttle Handles are available for every model. UG-1250 Series 13-19mm
UG-1500 Series 18-25mm
• Lever Type Handles are recommended for safer operation.
T

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Max.Free Rated Overall Weight Air Inlet Average

Capacity Spindle Air Hose
Speed Horse Length less wheel Thread Air
Model (Wheel Size) Size Size Code
(about) Power (about) (about) (Pipe Tap) Consumption

mm in min-1 w mm in kg lb in in mm in m3/min ft3/min

UG-1250-72 125 5 7200 750 436 17 11/64 3.20 7.04 1/2-13 NPT3/8 12.7 1/2 0.90 32.7 54204
UG-1250L-72 125 5 7200 750 436 17 11/64 2.80 6.16 1/2-13 NPT3/8 12.7 1/2 0.90 32.7 54234
UG-1500-60 150 6 6000 1320 497 19 9/16 4.88 10.74 5/8-11 NPT3/8 12.7 1/2 1.30 45.9 54304
UG-1500-41 150 6 4100 975 497 19 9/16 4.88 10.74 5/8-11 NPT3/8 12.7 1/2 1.30 45.9 54314
UG-1500L-60 150 6 6000 1320 495 19 31/64 4.62 10.16 5/8-11 NPT3/8 12.7 1/2 1.30 45.9 54334
UG-1500L-41 150 6 4100 975 495 19 31/64 4.62 10.16 5/8-11 NPT3/8 12.7 1/2 1.30 45.9 54344
* Do not use vitrified wheels with higher speed type of each model.

POWER T OOLS G EN E R A L C ATA L O G 63

ABRASIVE TOOLS

SANDERS / POLISHERS

UP-15 UP-15N
A BRA SIVE T O O L S

UP-25DB
USG-45P UP-25NB

AG-180W UP-80-15
Paint color of the actual product may be
different from the images.

UP-15N/25NB PAD UP-26NB PAD HOLED PAD Dust collection bag AG-180W * T
wo different speeds available:
For UP-15N, 25NB&26NB 4,500min-1 for sanding and
G 7,000min-1 for grinding. AG-180W
comes with sanding speed setting
S 4,500min-1 with relevant
accessories as standard.
AG-180W can be converted into
125㎜ 150㎜
(5") (6") grinder model by changing speed
548-693-3
regulator to G position and
mounting wheel guard.

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Max.Free Rated Overall Weight Air Inlet Average

Capacity Overall Height Spindle Air Hose
Speed Horse Length less wheel Thread Air
Model (Pad/Paper Size) (about) (about) Size Size Code
Power (about) (about) (Pipe Tap) Consumption
-1 3 3
mm in min w mm in mm in kg lb in in mm in m /min ft /min
USG-45P 125 5 12000 225 187 7 23/64 104 4 3/32 0.87 1.91 3/8-24 NPT1/4 9.5 3/8 0.55 20.0 55372
AG-180W 180 7 7000 690 315 12 13/32 111 4 3/8 2.80 6.16 5/8-11 NPT1/4 9.5 3/8 0.90 32.0 58532
UP-80-15 160 6 3/8 1500 337 - - 170 6 7/8 1.80 3.96 5/8-11 NPT1/4 9.5 3/8 0.80 28.0 54632
UP-80-40 160 6 3/8 4000 337 - - 164 6 15/32 1.80 3.96 5/8-11 NPT1/4 9.5 3/8 0.80 28.0 54642
UP-80-60 160 5/16 6000 337 - - 170 6 7/8 1.80 3.96 5/8-11 NPT1/4 9.5 3/8 0.80 28.0 54672
UP-15 125 5 8500 210 112 4 13/32 93 3 21/32 1.20 2.64 - NPT1/4 6.35 1/4 0.45 16.0 53812
UP-25DB 125 5 11000 259 238 8 11/32 128 4 3/4 1.70 3.74 - NPT1/4 6.35 1/4 0.20 7.0 55132
UP-26DB 150 6 11000 259 238 8 11/32 128 4 3/4 1.78 3.92 - NPT1/4 6.35 1/4 0.20 7.0 55182
UP-15N 125 5 9000 225 175 6 57/64 103 4 1/16 1.50 3.30 - NPT1/4 6.35 1/4 0.45 16.0 53862
UP-25NB 125 5 9000 300 250 9 23/64 119 4 23/32 1.77 3.90 - NPT1/4 9.5 3/8 0.60 21.0 54782
UP-26NB 150 6 9000 300 263 10 23/64 119 4 23/32 1.95 4.30 - NPT1/4 9.5 3/8 0.60 21.0 54792

64 P OW E R TO O LS G E NE R AL C ATALO G
FEATURES

Features of Dual Action Orbital Sander UP-15, UP-25DB/26DB, UP-25NB/26NB

Dual action type (Dual rotation movement) adopted. As the

whole surface of paper attached rubber pad is rotated in
ellipse and true circle, smooth finish without sanding scratch
Pad Set Spindle Screw is possible.

（UP-25DB、UP-25NB　551-442-0）

Offset of Motor Unit And Pad : 3mm

Movement of Single Point on Rubber Pad

ABRA SIVE T O O L S
(Without Pad Set Spindle Screw) (With Pad Set Spindle Screw)
A A
Range of Movement Range of Movement

O’ O’
O O
Single action (eccentric movement only)
is possible with optional pad set spindle
screw (for UP-25DB/26DB,
UP-25NB/26NB).
A : Single Point on Rubber Pad
O’ : Center of Pad
O : Center of Motor Unit

Dual Action Single Action

Self-Suction Type Dual Action Orbital Sander (UP-25NB/26NB)

INTAKE

EXHAUST

DUST
SUCTION

This is self-suction system making effective use of exhaust. No forced suction

device is needed. Sanding dust is collected in the dust collection bag, through
the dust collection hose.

Backing Pad Assembly for UP-25/UP-26 Series B

C D
Dimension
Name Part Number Model
A (mm) B (mm) C (mm) D (mm) E
Backing Pad Assembly (5”) 124 31.5 20.5 11 NPT1/4 551-409-2 UP-25DB
Backing Pad Assembly (6”) 149 30 19 11 NPT1/4 548-409-5 UP-26DB
A
Backing Pad Assembly (5”) 124 28 16.5 11.5 NPT1/4 548-409-3 UP-25NB
E
Backing Pad Assembly (6”) 149 30 19 11 NPT1/4 548-409-5 UP-26NB

POWER T OOLS G EN E R A L C ATA L O G 65

ABRASIVE TOOLS

WARNING FOR SAFETY USE

Firstly, follow your local safety regulations strictly on grinders and abrasives. Following are basically required.

1. Before mounting to the Grinder, 2. The Wheel Spindle speed should be 3. Make sure before operation that the
make sure that the Grinding Wheels regularly checked with a tachometer Abrasive Wheel should be mounted
or other Abrasives are of suitable to make sure whether normal speed carefully and sufficiently with flanges
size, shape, quality and strength to is maintained. The governed Grinders and nuts of proper size and shape by
the rated speed (min-1) stamped on must be checked to be sure governor use of the Spanners.
the name plate or tool housing. mechanism is functioning properly.
A BRA SIVE T O O L S

4. All Grinding Wheels should be 5. Before installing a Grinding Wheel, 6. Pay attention so that the speed of
closely inspected before installation after all Grinders repair and whenever Grinder does not exceed its
and use. If cracks, nicks, or chips are the Grinder is issued for use, test run maximum speed specified. Do not
found, do not use the Wheel in the Grinder by a competent person increase air pressure for power-up.
question. for one minute under a protected
area.

7. Make sure to use wheel guard of 8. Never exceed maximum speed of 9. Never use the side of grinding Wheel,
suitable size and fix it properly when the Abrasive Wheel to avoid when a Grinding Wheel is not
using Grinding Wheels of more than dangerous breakage. Fragments intentionally designed for side use.
50mm in diameter. from the Wheel can cause serious
injury or death. Do not operate
without wearing eye protector and
gloves.

66 P OW E R TO O LS G E NE R AL C ATALO G
DRILLS &
TAPPERS
COMBINATION DRILLS

TAPPERS

POWER T OOLS G EN E R A L C ATA L O G 67

DRILLS & TAPPERS

DRILLS

UD-50-22 UD-60-29

UD-50-45
Power is controlled by the built- UD-60-04 UD-80-12
in Air Regulator located on the
handle.
(Pistol handle type only)

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Free Overall Weight From Center Nominal Type Average

Drilling Speed Length with Chuck to Outside Chuck of Air
Model Capacity Code
(about) (about) (about) (about) Size Spindle Consumption
-1 3 3
mm in min mm in kg lb mm in mm in in-thr'd m /min ft /min
UD-50-200 3 No.5 23000 135 5 5/16 0.70 1.50 21.0 53/64 8 5/16 3/8-24UNF 0.40 14 61172
UD-50-45 6 1/4 5000 145 5 23/32 0.86 1.89 21.0 53/64 8 5/16 3/8-24UNF 0.40 14 61142
UD-50-22 8 5/16 2200 140 5 1/2 0.90 1.98 21.0 53/64 8 5/16 3/8-24UNF 0.40 14 61102
DRILLS & TAP P ERS

UD-60-29 8 5/16 2900 165 6 1/2 1.10 2.43 22.5 57/64 8 5/16 3/8-24UNF 0.50 18 61252
UD-60-20 8 5/16 2000 180 7 1/8 1.20 2.64 22.5 57/64 8 5/16 3/8-24UNF 0.50 18 61242
UD-60-15 8 5/16 1600 180 7 1/8 1.20 2.64 22.5 57/64 8 5/16 3/8-24UNF 0.50 18 61232
UD-60-07 13 1/2 700 219 8 5/8 1.40 3.08 22.5 57/64 13 1/2 1/2-20UNF 0.50 18 61212
UD-60-04 13 1/2 500 220 8 5/8 1.40 3.08 22.5 57/64 13 1/2 1/2-20UNF 0.50 18 61202
UD-80-12 13 1/2 1200 216 8 1/2 1.80 3.96 26.0 1 1/64 13 1/2 1/2-20UNF 0.65 23 61372
UD-80-07 13 1/2 700 239 9 13/32 2.30 5.06 26.0 1 1/64 13 1/2 1/2-20UNF 0.65 23 61342
UD-80-04 16 5/8 400 247 9 23/32 2.90 6.39 26.0 1 1/64 16 5/8 5/8-16UN 0.65 23 61302
*Air Hose Size (Inside Diameter) : 9.5mm (3/8") *Air Inlet Thread : NPT1/4"

UD-50S-22 UD-60S-29

UD-50S-45
UD-60S-04 UD-80S-12
SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Free Overall Weight From Center Nominal Type Average

Drilling Speed Length with Chuck to Outside Chuck of Air
Model Capacity Code
(about) (about) (about) (about) Size Spindle Consumption
mm in min-1 mm in kg lb mm in mm in in-thr'd m3/min ft3/min
UD-50S-200 3 No.5 23000 193 7 7/8 0.70 1.50 21.0 53/64 8 5/16 3/8-24UNF 0.40 14 61972
UD-50S-45 6 1/4 5000 210 8 9/32 0.85 1.87 21.0 53/64 8 5/16 3/8-24UNF 0.40 14 61942
UD-50S-22 8 5/16 2200 205 8 1/16 0.83 1.83 21.0 53/64 8 5/16 3/8-24UNF 0.40 14 61902
UD-60S-29 8 5/16 2900 227 8 15/16 1.05 2.32 22.5 57/64 8 5/16 3/8-24UNF 0.50 18 61772
UD-60S-20 8 5/16 2000 238 9 3/8 1.15 2.54 22.5 57/64 8 5/16 3/8-24UNF 0.50 18 61742
UD-60S-15 8 5/16 1600 238 9 3/8 1.15 2.54 22.5 57/64 8 5/16 3/8-24UNF 0.50 18 61732
UD-60S-07 13 1/2 700 272 10 23/32 1.35 2.98 22.5 57/64 13 1/2 1/2-20UNF 0.50 18 61702
UD-60S-04 13 1/2 500 279 10 63/64 1.35 2.98 22.5 57/64 13 1/2 1/2-20UNF 0.50 18 61712
UD-80S-12 13 1/2 1200 277 10 29/32 1.60 3.53 26.0 1 1/64 13 1/2 1/2-20UNF 0.65 23 61392
UD-80S-07 13 1/2 700 300 11 13/16 2.10 4.73 26.0 1 1/64 13 1/2 1/2-20UNF 0.65 23 61352
UD-80S-04 16 5/8 400 307 12 3/32 2.70 5.95 26.0 1 1/64 16 5/8 5/8-16UN 0.65 23 61332
UD-80-12G 13 1/2 1200 282 11 7/64 2.30 5.06 26.0 1 1/64 13 1/2 1/2-20UNF 0.65 23 61382
UD-80-07G 13 1/2 700 305 12 1/64 2.80 6.16 26.0 1 1/64 13 1/2 1/2-20UNF 0.65 23 61362
UD-80-04G 16 5/8 400 313 12 21/64 3.40 7.50 26.0 1 1/64 16 5/8 5/8-16UN 0.65 23 61322
*Air Hose Size (Inside Diameter) : 9.5mm (3/8") *Air Inlet Thread : NPT1/4"

68 P OW E R TO O LS G E NE R AL C ATALO G
UD-50S-22A UD-60S-29C

DRILL ADAPTER (for UD-50S Series) CONE JAW CHUCK (for UD-50S Series)
Part Number : 924-015-0 Capacity :up to 1/4" or 6.35mm
Part Number : 923-100-0
12mm 28mm 19mm 26mm

6mm 20mm 7mm 19mm

φ21
/4-28UNF
1

Flat Point Screw

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Free Overall Weight Height From Center Nominal Type Average

Drilling Speed Length with Chuck with Chuck to Outside Chuck of Air
Model Capacity Code
(about) (about) (about) (about) (about) Size Spindle Consumption
-1 3 3
mm in min mm in kg lb mm in mm in mm in in-thr'd m /min ft /min
UD-50S-45A 4 No.8 5000 253 9 31/32 0.90 1.98 40 1 57/64 21.0 53/64 - - 1/4-28UNF 0.40 14 62042
UD-50S-22A 4 No.8 2200 248 9 49/64 0.88 1.94 40 1 57/64 21.0 53/64 - - 1/4-28UNF 0.40 14 62002
UD-60S-29C 8 5/16 2900 276 10 55/64 1.52 3.34 90 3 35/64 22.5 57/64 8 5/16 3/8-24UNF 0.50 18 61872
UD-60S-15C 8 5/16 1600 283 11 9/64 1.60 3.52 90 3 35/64 22.5 57/64 8 5/16 3/8-24UNF 0.50 18 61832
*Air Hose Size (Inside Diameter) : 9.5mm (3/8") *Air Inlet Thread : NPT1/4"

OPTION

DRILLS & TAP P ERS

Dead Handle & Dead Handle Connector
Head Sizes C H
Model
mm in mm in

UD-50S-22A 10.0 25/64 48.0 1 57/64

H
H

UD-60S-29C 17.0 43/64 90.0 3 35/64

C C UD-60S-15C 17.0 43/64 90.0 3 35/64
For UD-60 series : 613-720-0 Dead Handle / 612-730-0 Dead Handle Connector
For UD-80 series : 613-720-0 Dead Handle / 613-730-0 Dead Handle Connector

SELECTION GUIDE

Material Tap Pilot Hole Size

(mm)
Stainless Steel （Drilling Speed 9～12m/min） Aluminium （Drilling Speed 60～90m/min）
Drill Size
Soft Steel （Drilling Speed 24～33m/min） Wood （Drilling Speed 90～120m/min） Pilot Hole
Bolt Size
Plastic （Drilling Speed 30～45m/min） Size
3mm M3 2.40
4mm M4 3.25
5mm M5 4.1
6mm M6 5.0
8mm M7 6.0
10mm M8 6.8
12mm M9 7.8
13mm M10 8.5
14mm M12 10.2
16mm M14 12.0
19mm
22mm
23mm
25mm
28mm
32mm
44mm
50mm
75mm
100mm
20 50 100 500 1000 5000 10000 20000
Rotation Speed【min-1】

POWER T OOLS G EN E R A L C ATA L O G 69

DRILLS & TAPPERS

DRILLS
Smooth and accurate operations for many kinds of applications, such as
drilling, tapping, reaming and tube rolling, etc.

SELF-RETURNING ROLL TYPE THROTTLE HANDLE

Reversing Ring

Spring-Loaded Roll type

Throttle Handle

SPECIFICATIONS Recommended Air Pressure : 0.6MPa(85psi)

Free Overall From Center Feed Air Average

Drilling Weight
Speed Length to Outside Length Hose Air
Model Type Capacity (about) Code
(about) (about) (about) (about) Size Consumption
-1 3 3
mm in min mm in kg lb mm in mm in mm in m /min ft /min
URD-22RR Self-Returning 22.0 7/8 600 442 17 13/32 5.8 12.8 39 1 17/32 70 2 3/4 12.7 1/2 1.3 46 63242
Air Inlet Thread : NPT3/8" for URD-22RR

DRILLS & TAPPERS

TAPPERS
Double-Trigger Handle OPTION
DRILLS & TAP P ERS

UT-66 series reversible drills have the Size up of Chuck is possible.

double trigger handle for quick and
frequent switchover of rotation.

Reversing

Forwarding

923-060-0 923-053-0

"Push-Pull" Auto Reversing Clutches

Pull back for tapping out.
Reversing
UT-66B-07
682-732-0 678-732-7

Chuck Adaptor

Push forward for tapping in.

Forwarding
Name Part Number
Power is
controlled by φ13 Chuck 923-060-0
the built-in Air φ13 Taper Adapter 682-732-0
Regulator
UT-60-04 UT-60S-07 located on the φ10 Chuck 923-053-0
handle. φ10 Taper Adapter 678-732-7
UT-60-07 *Tapping capacity is up to nominal Standard
UT-60-04 chuck size.

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Free Overall Weight From Center Average

Tapping Speed Length with Chuck to Outside Air
Model Capacity Code
(about) (about) (about) (about) Consumption
-1 3 3
mm in min mm in kg lb mm in m /min ft /min
UT-66B-15 6 1/4 1500 183 7 7/32 1.32 2.90 25.0 31/32 0.4 14.4 68102
UT-66B-07 8 5/16 800 196 7 23/32 1.42 3.12 25.0 31/32 0.4 14.4 68132
UT-60-07 8 5/16 680 244 9 39/64 1.80 3.96 22.5 57/64 0.5 18.0 67852
UT-60-04 8 5/16 400 244 9 39/64 1.80 3.96 22.5 57/64 0.5 18.0 67872
UT-60S-07 8 5/16 680 316 12 7/16 1.65 3.63 22.5 57/64 0.5 18.0 68022
UT-60S-04 8 5/16 400 316 12 7/16 1.65 3.63 22.5 57/64 0.5 18.0 68002
Air Inlet Thread : NPT1/4" for UT-66B-15~UT-60S-04 Air Hose Size : 9.5mm (3/8") for UT-66B-15~UT-60S-04
Nominal Chuck Size : 8mm (5/16") for UT-66B-07~UT-60S-04

70 P OW E R TO O LS G E NE R AL C ATALO G
PERCUSSION
TOOLS
RIVETING HAMMERS

IMPACT CUTTERS

FLUX CHIPPERS

CHIPPING HAMMERS

POWER T OOLS G EN E R A L C ATA L O G 71

PERCUSSION TOOLS

RIVETING HAMMERS
SUPER VIBRATION-PROOF TYPE
Super vibration-proof hammers reduce vibration exposure stress and fatigue of operators.
Total vibration value is less than 2.5m/s2.

BRH-1USD BRH-5USD

BRH-1UD

BRH-5UD

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Riveting Capacity
Blow Overall Weight Less Piston Piston Air Inlet Air Average
Per Min. Length Rivet Set Diameter Stroke Thread Hose Air Code
Model Duralumin Steel (about) (about) (about) (about) (about) (Pipe Tap) Size Consumption

mm in mm in bpm mm in kg lb mm in mm in in mm in m3/min ft3/min R H

BRH-1UD (R,H) 3.2 No.5 2.4 No.3 2800 143 5 5/8 1.40 3.1 14.30 9/16 38 1 1/2 NPT1/4 9.5 3/8 0.34 12.0 70882 70892
BRH-5UD (R,H) 6.4 1/4 4.8 No.10 1800 211 8 5/16 1.65 3.6 12.70 1/2 100 4 NPT1/4 9.5 3/8 0.37 13.0 70942 70952
BRH-1USD (R,H) 3.2 No.5 2.4 No.3 2800 272 10 45/64 1.60 3.5 14.30 9/16 38 1 1/2 NPT1/4 9.5 3/8 0.34 12.0 70922 70932
BRH-5USD (R,H) 6.4 1/4 4.8 No.10 1800 340 13 25/64 1.90 4.2 12.70 1/2 100 4 NPT1/4 9.5 3/8 0.37 13.0 70982 70992

STANDARD TYPE
P ER CU SSIO N T O O L S

SBH-0 SBH-1A（R）

BRH-1U（R）

BRH-1US（R）

BRH-5U（R）

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

mm in mm in bpm mm in kg lb mm in mm in in mm in m3/min ft3/min R H

SBH-0 2.3 No.2 - - 6500 123 4 27/32 0.32 0.7 10.00 25/64 23 29/32 NPT1/8 6.35 1/4 0.10 3.5 70012 -
SBH-1A(R,H) 2.6 No.3 - - 4000 209 8 15/64 0.86 1.9 11.11 7/16 56 2 3/16 NPT1/4 6.35 1/4 0.15 5.0 70112 78412
BRH-1U(R,H) 3.2 No.5 2.4 No.3 2800 122 4 15/16 1.05 2.4 14.30 9/16 38 1 1/2 NPT1/4 9.5 3/8 0.34 12.0 70512 78612
BRH-1US(R,H) 3.2 No.5 2.4 No.3 2800 180 7 1/8 1.00 2.2 14.30 9/16 38 1 1/2 NPT1/4 9.5 3/8 0.34 12.0 70612 78712
BRH-1UG(R,H) 3.2 No.5 2.4 No.3 2800 187 7 3/8 1.78 3.9 14.30 9/16 38 1 1/2 NPT1/4 9.5 3/8 0.34 12.0 70712 78812
BRH-5U(R,H) 6.4 1/4 4.8 No.10 1800 189 7 7/16 1.40 3.1 12.70 1/2 100 4 NPT1/4 9.5 3/8 0.37 13.0 71012 78912
BRH-5US(R,H) 6.4 1/4 4.8 No.10 1800 246 9 11/16 1.45 3.2 12.70 1/2 100 4 NPT1/4 9.5 3/8 0.37 13.0 71112 79012
BRH-5UG(R,H) 6.4 1/4 4.8 No.10 1800 258 10 5/32 2.13 4.7 12.70 1/2 100 4 NPT1/4 9.5 3/8 0.37 13.0 71212 79112

72 P OW E R TO O LS G E NE R AL C ATALO G
STANDARD ACCESSORIES SHANK SIZE FRONT VIEW OF SPRING CHISEL RETAINER
for BRH-5U(H) series 876-179-1 for BRH-1UD & BRH-5UD series
Model Retainer Spring Rivet Sets
705-813-1 for BRH-1U & BRH-5U series
SBH-0 ① a,b BRH-5U(H) series
SBH-1A (R) ②、⑥ c,i 15

φ10.2
②、⑥ d,i

φ19
BRH-1U (R) series
BRH-1U (H) series ②、⑥ 8.6
BRH-5U (R) series ④、⑥ g,i
BRH-5U (H) series ④、⑥ φ16.5

BRH-1UD (R) series ②、⑤ d,i

BRH-1UD (H) series ②、⑤
BRH-5UD (R) series ④、⑤ g,i
BRH-5UD (H) series ④、⑤
Rivet Set is not attached to the H type.
*Retainer Spring No. ③ and Rivet Set e/f/h are optional accessories.

RIVETS for SBH & BRH Series （mm）

Retainer Spring Rivet Set
Model
Part Number Part Number
55
25
a 920-810-0 R1.3

φ12
φ8

φ8
22

① 700-810-1 55 SBH-0
φ16
φ9

25
φ6.4 R1.87 R1.3

φ8
b 920-004-0 φ3.5

φ8
1.2

φ12
90.1
41.6

φ10.2
R2.34 2.7
R1

c 920-020-0
φ7.5

SBH-1A（R）
φ4.5

1.6
φ12.7

36 BRH-1U（R）Series
φ19

② 705-810-1 BRH-5U（R）Series
φ13

φ28

90.1
41.6 BRH-1UD（R）Series
φ10.2

BRH-5UD（R）Series
2.7

R2.98
R1

d 920-021-0
φ8.9
φ5.7

2.1
φ12.7
φ19

PERC U SSIO N T OOLS

90.1
41.6
φ10.2

R3.71
2.7

e
R1

920-030-0
φ10.6

SBH-1A（R）
φ16
φ19

BRH-1U（R）Series
φ7.2

35 2.8
Round Shank

③ 710-811-1 BRH-5U（R）Series
φ16

φ28

90.1
41.6
BRH-1UD（R）Series
BRH-5UD（R）Series
φ10.2

R4.65
2.7

f 920-032-0
R1
φ12.7

φ16
φ19
φ9

3.5

90.3
43.8
φ10.2

R5.08
2.7

g 920-040-0
R1
φ25.4
φ13.5

φ19
φ10

40
4.2 BRH-5U（R）Series
④ 710-812-1
φ28
φ19

90.3
43.8
BRH-5UD（R）Series
φ10.2

R8.07
2.7

h 920-042-0
R1
φ25.4
φ19
φ16

φ19

BRH-1UD（R）Series
⑤ 876-179-1
BRH-5UD（R）Series
φ28

84.4
41.6
φ15.9

φ10.2

i
.7

920-800-0
R12
φ19

φ19

40
SBH-1A（R）
⑥ 705-813-1 BRH-1U（R）Series
φ28

BRH-5U（R）Series

POWER T OOLS G EN E R A L C ATA L O G 73

PERCUSSION TOOLS

IMPACT CUTTERS / FLUX CHIPPERS

BRH-7（R）
UFC-0N

OPTION
Chisels For BRH-7 Chisels for UFC-0N, 1N
Part Number Dimension(mm)
Chisel Chisel Part Number
Round Shank Hex. Shank A B
○ 921-134-0(φ13) ○ 921-135-0(φ13)
B
135 43 43
135
135 43
43
135 43 Blank 13.5 14.5
＊921-136-0(φ12.7) ＊921-137-0(φ12.7)
○ 921-201-0 31.5
12.3
A

135 43
150

12
135
135 43
43
○（7"） ○ 921-127-0

.7
135 43 Flat 921-087-0 38 Scraper
22

27°
109 43
109
109 43
43 B
109 43
Sheet Metal(A) ○ 921-096-0 ○ 921-115-0 43
13.5 14.5 921-202-0 35 158
12.3
A

109 43
109
109 43
43
109 43
Sheet Metal(B) 921-092-0 　 921-117-0 Flat Chisel
12
.7
56
921-206-0 60 140
1.6

103 43
103
103 43
43
103 43
Spot Weld Breaker ○ 921-085-0 ○ 921-125-0
125
125
43
43
BRH-7 Retainer Spring
125 43
125 43
921-091-0 　 921-121-0
P ER CU SSIO N T O O L S

Taper Punch 40 12.5

109 43
109
109 43
43
109 43

Bushing Remover 921-094-0 　 921-119-0 φ13.5 ○ 714-813-1

φ28
R8

109 43

Fork 921-097-0 　 921-122-0

Shank Size Of Rivet Sets
55 43
SBH-0 SBH-1A, BRH-1U & 5U BRH-7 UFC series
Hammer 921-098-0 　 921-123-0
14
14
14.5
14

.5
.5
.5

.5
φ10.5

φ10.2

φ10.2
φ10.5
φ10.5
φ10.5

φ10.5

φ10.2
φ10.2
φ10.2

φ10.2

φ10.2
φ10.2

φ10.2

φ10.2
φ8

8.6
φ8
φ8
φ8

φ8

8.6
8.6

8.6

122 43
○ 921-088-0 ○ 921-128-0
.7

Scraper
12.7
.7
.7

φ8 φ8 φ8 φ8 φ8 φ10.5φ10.5φ10.5φ10.5 φ10.2φ10.2φ10.2φ10.2 φ19 φ19 φ19 φ19 φ19

φ8 φ10.5
φ10.5 φ10.2
φ10.2 φ19
12

12
13.5
13.5
13.5
13.5

39.21 13.5

13.5

122 43
25
25
25
25

921-093-0 　 921-118-0
39.21
39.21
39.21
39.21

39.21

39.21
39.21
39.21

39.21

Tail Pipe Cutter

41.5

41.6
41.5
41.5
41.5

41.5

41.6
41.6
41.6

41.6

43
43
43
43

12.312.3 12.3 12.3 12.3

12.3

125 43
Double Blade
Panel Cutter 921-089-0 　 921-129-0
Round Hex. Round Round Hex. Flux
＊If you use small Retainer Spring 705-810-1, use φ12.7 chisel. Standard Chisels are marked with "○" Shank Shank Shank Shank Shank Chippers

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Blow Overall Weight Less Piston Piston Air Inlet Air Average
Per Min. Length Chisel Diameter Stroke Thread Hose Air
Model (about) (about) (about) (about) (about) (Pipe Tap) Size Consumption Code

bpm mm in kg lb mm in mm in in mm in m3/min ft3/min

BRH-7(R) 3400 168 6 39/64 1.64 3.60 19.05 3/4 50 1 31/32 NPT1/4 9.5 3/8 0.48 17.0 71412
BRH-7(H) 3400 168 6 39/64 1.64 3.60 19.05 3/4 50 1 31/32 NPT1/4 9.5 3/8 0.48 17.0 77112
UFC-0N 5300 180 7 1/8 1.38 3.04 25.00 63/64 28 1 1/4 NPT1/4 9.5 3/8 0.3 10.7 75412
UFC-1N 4200 190 7 1/2 1.50 3.30 25.00 63/64 34 1 11/32 NPT1/4 9.5 3/8 0.3 10.7 75712
R= Round Shank H=Hex. Shank BRH-7= with Built-in Air Regulator

74 P OW E R TO O LS G E NE R AL C ATALO G
PERCUSSION TOOLS

CHIPPING HAMMERS

AA-20（R）

AA-00（R）

PB-20（R）

OPTION
CHISELS for AA-00 SERIES (Collared type) CHISELSφ17.5
for AA
60
& φ17.5
PB SERIES
14.7㎜
60 60
14.7㎜
60

Round Shank φ12.7 46㎜ φ12.7 Hex. Shank

10.5㎜
46㎜ 46㎜ 10.5㎜ 46㎜ Round Shank 20 20 Hex. Shank 14.7㎜
14.7㎜
60 60 60 60

φ17.5 φ17.5

Overall Length Part Number Overall Length Part Number

POINT shape POINT shape
φ12.7 46㎜ 10.5㎜ 46㎜
mm in Round Shank Hex.Shank mm in Collared Type
R
φ12.7 10.5㎜

921-072-0
46㎜ 46㎜

200 7 7/8" 921-224-0 921-049-0 200 7 7/8"

PERC U SSIO N T OOLS

φ12.7 46㎜ 10.5㎜ 46㎜

H 921-075-0
φ12.7 46㎜ 10.5㎜ 46㎜

176 6 15/16" 877-035-1 921-221-0 R 921-070-0

220 8 21/32"
220 8 21/32" 921-225-0 921-220-0 H 921-073-0
200 7 7/8" R 921-071-0
220 8 21/32" H 921-074-0

SPECIFICATIONS Recommended Air Pressure : 0.6MPa (85psi)

Chisel Shank Size

Blow Overall Weight Less Piston Piston Air Inlet Air Average
Per Min. Length Chisel Diameter Stroke Thread Hose Air Code
Model Round Hexagonal (about) (about) (about) (about) (about) (Pipe Tap) Size Consumption

mm in mm in bpm mm in kg lb mm in mm in in mm in m3/min ft3/min R H

AA-00(R,H) 12.7 1/2 10.5 3/8 2700 228 8 31/32 2.3 5.00 20.0 25/32 50 1 31/32 NPT1/4 9.5 3/8 0.35 12.3 71952 77252
AA-20(R,H) 17.5 5/8 14.7 9/16 2300 270 10 5/8 5.3 11.60 28.0 1 7/64 55 2 5/32 NPT3/8 12.7 1/2 0.60 21.1 72152 77452
AA-30(R,H) 17.5 5/8 14.7 9/16 2000 298 11 23/32 5.7 12.50 28.0 1 7/64 79 3 1/8 NPT3/8 12.7 1/2 0.60 21.1 72252 77552
AA-40(R,H) 17.5 5/8 14.7 9/16 1450 340 13 3/8 6.1 13.40 28.0 1 7/64 111 4 3/8 NPT3/8 12.7 1/2 0.60 21.1 72352 77652
PB-20(R,H) 17.5 5/8 14.7 9/16 1900 350 13 25/32 6.6 14.50 28.5 1 1/8 76 3 NPT3/8 12.7 1/2 0.80 28.0 72752 77852
PB-30(R,H) 17.5 5/8 14.7 9/16 1500 397 15 5/8 7.1 15.60 28.5 1 1/8 102 4 1/62 NPT3/8 12.7 1/2 0.80 28.0 72852 77952

POWER T OOLS G EN E R A L C ATA L O G 75

Compressor
Theoretical Consumption Energy of Compressor
You can refer to the table 1 to find the theoretical consumption Table 1
energy of compressor, which is created through the adiabatic Single Stage Compression (Adiabatic Compression)
compression, to compress 1m3/min (normal cubic meter per
minute) of free air to the various pressure levels. It is highly Gauge pressure Theoretical Machine Various Losses
Consumption Efficiency
recommended that you should make the consumption energy (30% Included)
Energy (15% Included)
value greater than the actual value by taking into consideration MPa kW kW kW
the machine efficiency including friction loss caused by
0.3 2.84 3.27 4.25
compressor.
0.4 3.41 3.92 5.10
The consumption energy of compressor providing a pneumatic 0.5 3.91 4.49 5.84
tool with 1m3/min (normal cubic meter per minute) of air at the 0.6 4.35 5.00 6.50
gauge pressure 0.6MPa will be some 6.5kW or larger, if we 0.7 4.74 5.45 7.09
consider the possible losses.

Energy Needed for Compressor Table 2

Number of Tool Coefficient of Multiple Tools in Operation
Q≧6.5 kW × (V×n + V×n + V×n・・・) × K × S ×α
1〜5 1.0
Q : Energy needed for compressor (kW)
6〜10 0.8
V : Air consumption per tool (m3/min (normal cubic meter per 11〜20 0.7
minute))
21〜30 0.6
n : Number of tool 31〜50 0.5
K : Coefficient of multiple tools in operation (table 2) 50〜100 0.4
S : Coefficient of tool usage (table 3)
① Continuous operation: 1.0
Tool model for this category: Grinder, Sander, and Table 3
Percussion Tool
Operation Coefficient of Tool Usage
② Discontinuous operation: 0.5
Continuous Operation 1.0
Tool model for this category: Oil-pulse tool, Impact Discontinuous Operation 0.5
Wrench, and Screwdriver
α : Loss caused by air leakage from connection between pipes

Table 4
The table 4 refers to the major compressor power, which is Energy Needed for
Air Consumption
Category Tool Model Compressor
sorted by tool category and model number, to operate a tool
P ER CU SSIO N T O O L S

based on the catalogue air consumption value. m3/min (kW)

It takes long for a tool to complete a job at 0.4MPa as a UAT60 0.35 2.28
Oil-pulse Tool
compressor generates less power. On the other hand, it will UL90 0.53 3.45
not take long for a tool to do at 0.6MPa as a compressor UW-6SLRK 0.35 2.28
Impact Wrench
generates more power. You should decide which helps you UW-13SRK 0.45 2.93
save cost, based on your various applications. US-3.5A 0.20 1.02
The table 2 gives you an idea of coefficient of operation. The Screwdriver
US-5W 0.30 1.53
value to operate a number of tools simultaneously is smaller as
UG-38N 0.40 2.60
there are an increasing number of tools in operation. Grinder
The air consumption rate refers to the value in which a tool is USG-7S 1.10 7.15
used continuously for 1 minute. It is recommended, as shown UD-60-29 0.50 3.25
Drill
in the table 3, that you should make the consumption energy UD-80-12 0.65 4.23
value smaller than the actual value when you operate tools in SBH-1A 0.15 0.98
the above-mentioned discontinuous operation and that you Percussion Tool
BRH-7 0.45 2.93
should make the consumption energy value larger than the
Note: Value for tools except Screwdriver: 0.6MPa at gauge
actual value when you operate tools in the above-mentioned Value for Screwdriver: 0.4MPa at gauge.
continuous condition.

76 P OW E R TO O LS G E NE R AL C ATALO G
TESTERS &
ACCESSORIES
DIGITAL TORQUE TESTERS

TESTERS

ACCESSORIES

POWER T OOLS G EN E R A L C ATA L O G 77

TESTERS & ACCESSORIES

DIGITAL TORQUE TESTERS

UDT-200 & UDT-500
UDT-200 & UDT-500 series help you check the performance of oil-pulse tool and hand
torque wrench at regular intervals, allowing you to store and download the data.

FEATURES
• The built-in NiMH battery operation gives you hand-carry mobile use in your assembly
site especially for pulse-tools’commencement of one day operation. AC power source
from your plug can be used together.
• 11-hour continuous operation by battery is possible. Full recharging time is approx.
4-hours.
• Memory function can store maximum 250 torque data.
• Torque check and adjustment for angle nutrunner and shut-off pulse tool using optional
soft-joint attachment for traceability.
• Red color LED display gives clear visual confirmation.
• PC output terminal RS-232C is built in the UDT series.
• Torque transducer mounted in pick-up has optimum function to measure oil-pulse tool.

SPECIFICATIONS
Torque Capacity Range Blow Dimensions Code
Model Applicable Tool Type Weight
(Recommended Torque Capacity Accuracy mm(about) (A) Accessories
Kg(about)
Capacity Range) Range (W × D × H) (E)
Socket Adapter (3/8) 836-520-0
Pulse Wrench, Angle Nutrunner
(Soft-joint attachment assembly is Amplifier Amplifier Socket Adaptor (1/2) 836-520-1
UDT-200A (115V) required to measure shut-off type pulse 3 - 200 Nm 0-99 blows ±0.5% at (198 × 171 × 115) (1.7) 83102 TX-C46E-75 919-700-0
-200E (230V) wrench and angle nutrunner.) (15 - 200 Nm) (* ) rated output Pick-up Pick-up 83112 (Socket Bit)
Hand torque wrench (245 × 125 × 75) (8.5) AC Adaptor (120V) 910-217-0
*Never use impact wrench
AC Adaptor (230V) 910-218-0
Pulse Wrench, Angle Nutrunner Socket Adapter (1/2) 836-520-7
(Soft-joint attachment assembly is Amplifier Amplifier Socket Adaptor (5/8) 836-520-8
UDT-500A (115V) required to measure shut-off type pulse 30 - 500 Nm 0-99 blows ±0.5% at (198 × 171 × 115) (1.7) 83132 Socket Adaptor (3/4) 836-520-9
-500E (230V) wrench and angle nutrunner.) (150 - 500 Nm) (* ) rated output Pick-up Pick-up 83142
Hand torque wrench (280 × 150 × 90) (15.0) AC Adaptor (120V) 910-217-0
*Never use impact wrench AC Adaptor (230V) 910-218-0
(*) On condition that blow measurements start when input torque exceeds 60% of peak torque. Operating Voltage: 120V for UDT-**A , 220V for UDT-**E Operating Environment: (10-40˚C)
Humidity (20-80%), No Dew.

OPTION
Soft-joint Attachment Assembly
UDT-200 UDT-500
TE S TE RS & ACCE SSORI ES

For pulse tools or angle nutrunner

（M8）878-740-1 （M10）836-890-7 （M12）836-890-9 （M14）878-840-1 （M16）878-800-1 （M18）878-804-1

For angle nutrunner

（M8）836-890-1 （M10）836-890-2 （M12）836-890-5 （M20）878-807-1

Choose the correct size for your usage.

Other optional soft-joint attachment assemblies are available. Please contact your nearest URYU distributor.

78 P OW E R TO O LS G E NE R AL C ATALO G
UDT-25
UDT-25 is designed to check fastening torque and its number of pulses for the small
models (e.g. UL30, 40 and UAT30D・40・50) with the torque capacity range 0.3 Nm-25
Nm.
FEATURES
• Compact design for torque measurement and torque display sections gives hand-carry
mobile.
• Power source is nickel hydride battery. Full recharging time is approx. 4-hours.
11-hour continuous operation is possible after full charging. *1
• Applicable to reversing torque as well. *2
• UDT-25 tester can be used to check the capacity of US-LT, US-LD, and hand torque
wrench as well.
• Red color LED display gives you clear visual confirmation.
• Supreme accuracy of within ±0.5 % at the rated output.
• The RS232C port for data output is built in the UDT-25 tester.
• Data storage capacity: 250 data points.

*1: Never use during charging.

*2: Only forward rotation is available for Soft-Joint Attachment.

SPECIFICATIONS
Torque Capacity Range Weight
Applicable Tool Type (Recommended Torque BlowRange
Capacity Accuracy Power Source Environmental Dimensions
Model kg Code Accessories
Condition mm (about)
Capacity Range) (about)
Carrying Case 910-955-0
AC Adapter (115V) 910-950-0
UDT-25A
83062 AC Adapter (230V) 910-951-0
(115V) Test Socket (3/8") 830-520-6
Pulse Wrench,
Operation
Torque Control Hexagon Socket Bit
±0.5% Built-in Nickel Temperature: 918-223-0
Screwdriver, Direct 0.3 - 25 Nm 0 - 99 190 (W) × 180 (D) (13 × 100)
at rated Hydride 10 - 40℃ (No Dew) 2.3 Driver Adaptor 919-700-0
Drive Screwdriver, (2 - 25 Nm) blows (*) × 59 (H)
output Battery Humidity: 20 - 80%
Angle Nutrunner, Soft Joint
(No Dew) 830-890-6
Hand Torque Wrench Attachment
UDT-25E 83072 Soft Joint
(230V) 830-890-7
Attachment
Hexagon Head Bolt 946-928-0
(M8 × 20)
(*) On condition that blow measurements start when input torque exceeds 60% of peak torque. Operating Environment : (10-40˚C, no freeze) Humidity(20-80%), No Dew

Soft joint Attachments

TEST ERS & A CCE SSORI E S

830-890-6 / For Pulse Tools 830-890-7 / For Screwdrivers

Hexagon Head Bolt Hexagon Head Bolt

(M8 x 35) (12.9) (M8 x 35) (12.9)
(９４６-930-０) (９４６-９３０-０)
Adaptor Spacer Adaptor Spacer
（８３０-１６６-６）（８３０-１６６-６）

（８３６-１６５-３）
Adaptor （８３６-１６５-３）
Adaptor

Belleville Spring Belleville Spring

25 x 12.2 x 1.5 8 pcs. 25 x 12.2 x 0.9 9 pcs.
（962-601-0）（962-600-0）

Inner Snap Ring IRTW-25 Inner Snap Ring IRTW-25

（979-325-0）（979-325-0）

（８３０-１７５-６）
Casing （８３６-１７５-４）
Casing
Gear Cage Spacer Gear Cage Spacer
（４０８-４８３-０）（４０８-４８３-０）

Spindle Nut (M8) Spindle Nut (M8)

（830-359-6）（830-359-6）

POWER T OOLS G EN E R A L C ATA L O G 79

TESTERS & ACCESSORIES

DIGITAL TORQUE TESTERS

UET SERIES
URYU UET-10CUA/10CUE torque tester is designed to check
output torque of US-LT series Torque-Control Screwdriver. Its
built-in torque sensor shows the torque reading on LED display.

FEATURES
• Its built-in torque sensor reads the torque ranging from 0.1 to 10 Nm.
• LED digital display helps you read the reading in the darkness.
• Hit the RESET button for zero point adjustment.
• Supreme accuracy: within ±0.5%. Never use during charging.

• The CAL diagnostic features help you find any error in the built-in amplifier.
• The portability with a built-in battery helps you check tools on site.
• The soft-joint attachment comes standard with UET-10CU tester, which allows you to simulate the actual
application.
• The USB/RS232C port for data output is built in the UET-10CU tester.
• Full recharging time is approx. 2-hours. 16-hour continuous operation is possible after full charging.

SPECIFICATIONS
Torque Capacity Range
Applicable Tool (Recommended Environmental Dimensions Weight Code
Model Torque Accuracy Power Source Accessories
Type Condition (unit: mm) (about)
Capacity Range)
Carrying Case 909-418-0
AC Adapter (115V) 910-907-0
UET-10CUA Operation 83932 AC Adapter (230V) 910-908-0
(115V) US-LT series Temperature: 160 (W)
Torque-Control Built-in Nickel 0 - 40℃ (No Dew) × Hexagon Socket Bit (13 × 100) (5 Hex) 918-129-0
0.1 - 10 Nm ±0.5%
Screwdriver Hydride 190 (D) 2.3 kg Hexagon Socket Bit (13 × 100) (6.35 Hex) 918-223-0
(0.15 - 10 Nm) at rated output
Small-type Hand Battery × Driver Attachment Assembly 836-890-4
Torque Wrench Humidity: 30 - 90% 65 (H)
UET-10CUE (No Dew) Hexagon Head Bolt (M8 × 20) (12.9)
83942 946-928-0
(230V) (For Hard Joint)
Plate Spring 25 × 12.2 × 1.5 962-601-0

Driver Attachment Assembly

Hexagon Head Bolt (M8 x 35) (12.9) 946-930-0

San Blade Holder Flange 836-397-3

Thrust Needle Bearing (NTB 1024) 988-835-0

TE S TE RS & ACCE SSORI ES

Adaptor 836-165-3

Belleville Spring (25x12.2x0.9) 9 pcs. 962-600-0

Inner Snap Ring (25) 979-018-0

836-890-4
Casing 836-175-4

Hexagon Nut (1-M8) 960-050-0

Usage of Testing Attachment

Soft Joint Apply Plate Springs, Hard Joint

Testing Bolt (for soft-joint Apply Testing Bolt
Typically 3 turns to full torque test) Spacer, Nut, and Typically 1/10 turn to full
(for heard joint test)
after the bolt head or nut seats Casing. The Plate Springs and Nut (without
torque after the bolt head or nut
on the surface. are available in both weak Casing, Spacer
seats on the surface
and strong tensions. and Plate Spring).

80 P OW E R TO O LS G E NE R AL C ATALO G
TESTERS & ACCESSORIES

TESTERS
UFT SERIES HYDRAULIC TESTER
Verify tool’s performance with UFT prior to start of daily operation and you will find
out less power on tools that can cause under torque troubles during the operation.
UFT-6 UFT-10 UFT-16 UFT-24

FEATURES
• Hard and Soft joint can easily be changed.
• Equipped with digital display.
• Shift between Torque value and tension value can easily be changed.
• Decimal point can also be moved easily.
• Applicable for pulse tools, impact wrenches, angle nutrunner, and any other fastening tools.

SPECIFICATIONS
Weight (about) Code Weight (about) Code
Bolt Size Tension Range Torque Range
Bolt Size Tension
Model Range Torque Range
(kN) (Nm) Model
Kg Ib 120V 230V (kN) (Nm) Kg Ib 120V 230V
M5 3.6-6.1 3.2-5.4 M12 25.5-41.7 53.9-88.2
UFT-6 3.6 7.9 84022 84042
M6 5.1-13.9 5.4-14.7 UFT-16 M14 35.7-60.3 88.2-149 22.0 48.4 84092 84062
M6 5.1-13.9 5.4-14.7 M16 52.8-67.4 149-190
UFT-10 M8 10.4-22.2 14.7-31.4 12.0 26.4 84032 84052 M18 59.9-92.6 190-294
M10 17.8-30.6 31.4-53.9 UFT-24 M20 83.3-125 294-441 50.0 110.0 84082 84072
M24 104-162 441-686
*Never provide UFT with torque greater than maximum torque or tension of each bolt size.

UHT SERIES HYDRAULIC TORQUE TESTER

The UHT-series simply designed hydraulic torque testers are suitable to be applied to Screwdrivers (Cushion, Positive, Impact Clutch types), Impact
Wrenches and similar Impact action fastening tools in monitoring torque output of new and repaired tools in comparison with their master tools. The
readout in the dial indicator does not show absolute torque value, but just comparative degree of power of the tool being tested.

TEST ERS & A CCE SSORI E S

UHT-35 UHT-25 UHT-12 UHT-50

SPECIFICATIONS
Applicable Tool Type Applicable Torque Range Weight (about)
Model Code
or Square Drive Size Nm ft-lbs Kg Ib
UHT-12 Cushion/Positive Clutch 1-8 0.7-5.9 2.5 5.5 83912
UHT-16 Impact Clutch 3-20 2.2-14.8 7.5 16.5 83812
UHT-25 3/8"(9.5mm) 20-50 14-36 13.0 28.6 84012
UHT-35 1/2"(12.7mm) 50-300 36-215 19.0 41.8 84112
UHT-50 3/4"-1"(19.0-25.4mm) 300-2000 215-1450 150.0 330.0 84212

POWER T OOLS G EN E R A L C ATA L O G 81

TESTERS & ACCESSORIES

ACCESSORIES
Air Regulator Assembly Lock Plug
Dimensions Dimensions L
Item Part Number Item Part Number
D1 D2 L (mm) T L (mm) A（mm）C（mm）
A C
Air Regulator Assembly 1/8 NPT1/8 NPT1/8 42 932-100-0 Lock Plug NPT1/4 NPT1/4 43 14.7 20.3 933-042-0

Air Regulator Assembly 1/4 NPT1/4 NPT1/4 42 932-110-0 Lock Plug NPT3/8 NPT3/8 45 16.7 20.3 933-043-0

L D1

S
Spanner L

Dimensions A type
Item Part Number Used for

St
S (mm) L (mm) t (mm)
L
Spanner 8×2×90 8 90 2 936-100-0 UD-50S-22A
Spanner 17×3.2×135 17 135 3.2 936-051-0 UG-65/650E

t
A Spanner 21 21 173 5 936-521-0 AG-50, AG-50L B type
Spanner 29×4.76×150 29 150 4.76 936-054-0 USG-4S

S
L
Spanner 32×4×150 32 150 4 936-072-0 AG-100S, AG-100SL
Spanner 12 12 125 4.5 936-512-0 UD-50S-22A

St
L
UG-25NA, UG-25NSA Motor Oil (200mL) 998-725-0
Spanner 14 14 145 4.5 936-514-0 UG-38N, UG-38NA, UG-38NS, UG-38NSA

t
UG-38NL, UG-38NSL, UG-50S-200A
B
UG-25NA, UG-25NSA
Spanner 17 17 159 4 936-517-0 UG-65/650E

Spanner 23×5×195 23 195 5 936-053-0 USG-7S

Spanner 26×5×195 26 195 5 936-004-0 UP-80-40

Tool Holders
Dimension (mm) Ⅰ （6） G

Part Number Used for φC

A B C D E F G
15
2°
20
50
UAT30D~70 SERIES, UL30~70 SERIES,
E

20
Small φ34 φ49 φ54 38 60 100 84 852-644-1 US-5PW, -6PW, UD-50-200, -45, -22, D
F

7.7 2-φ10

UD-60-29, -20, -15, UT-66B-15 φB

18.9

UAT70~90 SERIES, UL70~90 SERIES, φA

VIEW FROM Ⅰ

Middle φ36 φ54 φ68 38 66 115 106.5 852-669-1 UA40MC~90MC, BP-T40~60 SERIES,
UW-6SLRK, -6SBRK, -6SHBRK, -B6SLK, -ST6SHK SERIES

UAT90~130 SERIES, UL90~130 SERIES,

TE S TE RS & ACCE SSORI ES

Large φ50 φ74 φ78 42 80 125 115 852-645-1 UA100MC, UX-ST800 SERIES,
UW-6SRK, -6SHBRK, -8SHRK, -9SRK SERIES Large Middle Small

HEXAGONAL SOCKET* SOCKET FOR STUD-BOLT DRIVING* BIT CHUCK ASSEMBLY* JOINT ASSEMBLY*

*Please contact your nearest URYU distributor for available sizes.

Extension Bars for Oil-Pulse Tools C

A
B
Part Number A&C Sq.Drive
(mm)

904-049-0 75
904-050-0 100 9.5mm (3/8")
904-051-0 150
904-155-0 76 12.7mm (1/2") B
904-156-0 125 D=φ15.875
904-157-0 204 Following o-ring and pin are fitted with the extension bar.
904-168-0 76 O-ring Pin
12.7mm (1/2") Sq. Drive (mm)
904-169-0 125 D=φ16 Part Number Description Part Number Description
904-172-0 204
9.5 990-290-0 O-ring JW12 971-990-0 Pin 3 × 16.5
*12.7mm square drive with φ15.875 is for UX-900S.
*Please contact your nearest URYU distributor for other available sizes. 12.7 990-291-0 O-ring JW17 971-991-0 Pin 3.2 × 24

82 P OW E R TO O LS G E NE R AL C ATALO G
OPERATOR'S SAFETY MANUAL FOR URYU POWER TOOLS

Safety Instructions

General Safety
-Only qualified and trained operators should install, adjust or use the tool.

-Do not modify the tool. Modifications can reduce the effectiveness of safety measures and increase the risks to the
operator.

Work Area Safety

-Keep work area clean and well lit. Cluttered or dark areas invite accidents.

-Do not use the tool in potentially explosive atmospheres, such as in the presence of flammable liquids, gases or dust.

-Always secure workpiece. Use clamps or other practical way to secure and support the workpiece to a stable platform.

-Be aware of slippery surfaces caused by use of the tool and of trip hazards caused by the air line.

-Keep bystanders and visitors away while operating the tool. Distraction can cause you to lose control.

Personal Safety
-Maintain a balanced body position and secure footing. Avoid awkward or off-balanced postures.

-Prevent unintentional or inadvertent start. Ensure that the throttle trigger / lever is in the off-position before connecting
the tool to air supply, picking up or carrying the tool. Carry the tool only by the handle. Carrying the tool with your finger
on the throttle trigger / lever or energising the tool that has the throttle trigger / lever on invites accidents.

-Dress properly. Do not wear loose clothing, jewellery and neck ware. Keep your hair, clothing and gloves away from all
moving parts.

-Use personal protective equipments such as dust mask, non-skid safety shoes and hard hat as instructed by the
employer and as required by occupational health and safety regulations.

-Wear suitable gloves to protect hands against hazards such as crushing, impacts, cuts and abrasions and heat.

-Always wear impact-resistant eye protection during the operation of the tool. The grade of protection
required should be assessed for each use.

-Remove any adjusting wrench before turning the tool on. A wrench that is left attached to a rotating part of
the tool may result in personal injury.

-Ensure that the workpiece is securely fixed.

Noise
-Use hearing protection in accordance with employer’s instructions and as required by occupational health
and safety regulations. Look after your hearing protection.

-Always ensure that the silencer is in place and in good working order when the tool is operating.

POWER T OOLS G EN E R A L C ATA L O G 83

OPERATOR'S SAFETY MANUAL FOR URYU POWER TOOLS
Vibration
-Support the weight of the tool in a stand, tensioner or balancer if possible.

-Hold the tool with a light but safe grip taking account of the required hand reaction forces. The risk from vibration is
generally greater when the grip force is higher.

-Wear warm clothing when working in cold conditions and keep your hands warm and dry. Direct cold air away from the
hands.

-Use sleeve fittings where practicable.

Dust and Fumes

-Direct the exhaust so as to minimise disturbance of dust in a dust-filled environment. Where dusts or fumes are created,
the priority shall be to control them at the point of emission.

Pneumatic Safety
-Do not exceed the maximum air pressure stated on the tool.

-Use correct hoses and always check for damaged or loose hoses and fittings. Whipping hoses can cause severe injury.

-Do not abuse the hose. Never use the hose for carrying, pulling or hanging the tool.

-Keep the hose away from heat, oil, sharp edges or moving parts. Damaged or entangled hoses increase the risk.

-Never direct air at yourself or anyone else.

Electrical Safety
-Do not handle the tool, controller, battery or charger with wet hands.

-Do not expose the tool, controller, battery and charger to rain or wet conditions.

-Do not abuse the power cable. Do not pull the power cable for carrying the tool, controller or charger or disconnecting
the power plug from the power point.

-Arrange the power cable so that it may not be stepped, caught or stressed for damages.

-Do not attempt to open, disassemble, modify or service the battery pack.

-Do not crush, puncture, shorten external contracts or circuits, dispose of in fire or water. Keep the battery away from
metal objects such as paper clips, coins, keys, screws or other small metal objects that can lead to short circuit.

-Do not expose batteries to temperatures above 40˚C.

-Keep the battery and charger dry and away from water or any liquid as it may cause a short circuit.

-Do not use a battery that appears damaged, deformed or discoloured or the one that has any rust on its casing,
overheats or emits a foul odour.

-Do not attempt to solder anything to the battery. It will dissolve insulations, destroy the gas exhaust valve

or the protection circuit.

-Do not place any object on the charger nor cover the battery with flammable things while charging.

-Leaks from battery cells can occur under extreme conditions. Do not allow the leaking fluid to come in contact with skin
or clothing. If already in contact, flush the affected area immediately with clean water and seek medical advice. If the
liquid comes in contact with eyes, DO NOT rub; rinse with clean water immediately for minimum 10 minutes and seek
medical help. Liquid ejected from the battery may cause irritation or burns.

-Take extra precautions to keep a leaking battery away from fire as there is a danger of ignition or explosion.

-Do not use charger if it is damaged by a drop or is with a damaged power cable.

84 P OW E R TO O LS G E NE R AL C ATALO G
Residual Risks
-Gloves can become entangled with the rotating drive, causing severed or broken fingers. Rotating drive sockets and drive
extensions can easily entangle rubber coated or metal reinforced gloves.

-Additional residual risks may arise when using the tool which may not be included in the safety warnings. These risks can
arise from misuse, prolonged use and so on. Even with the application of the relevant safety regulations and the
implementation of safety devices, certain residual risks cannot be avoided. (e.g. injuries caused when changing any
parts, blades or accessories)

Tool Use and Care

-Hold the tool correctly: be ready to counteract normal or sudden movements – have both hands available.

-Keep the tool dry and clean – free from oil and grease for better control of the tool.

-Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate
for which it is designed.

-Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the tool
operation. If damaged, get the tool repaired before use.

-Select and maintain and replace the socket / bit properly to prevent an unnecessary increase in noise / vibration level(s).

-Check attached tools such as sockets, grinding wheel etc. and replace them if worn or damaged.

-Clean the exhaust silencer and filter frequently or replace in order to prevent clogging and decreased power.

-Store the tool out of the reach of children and do not allow persons unfamiliar with these instructions to operate the tool.
Tools are dangerous in the hands of untrained users.

Branch Pipe Main Pipe should

RECOMMENDED AIR PIPING SYSTEM have approx. ① ② ③
1/100 downward
Main Pipe pitch.

Aftercooler
and Moisture Shutoff
Collector Valve Drain Drain
Trap Trap

Air
①Air Filter :
Air Receiver removes water and dirt particles from
Compressor
Drain
(Tool Station) compressed air.
Pressure ②Pressure Regulator :
Regulator
gives steady and dependable regulation at
Drain 0.6MPa (85psi).
Filter
③Air Oiler (Lubricator) :
Oiler
Tool assures longer and more dependable tool life.

POWER T OOLS G EN E R A L C ATA L O G 85

NOISE &
VIBRATION

86 P OW E R TO O LS G E NE R AL C ATALO G
DECLARATION OF NOISE & VIBRATION EMISSION

NOISE LEVELS AND VIBRATION VALUES

On 29 December 2009 EU new Machinery Directive, 2006/42/EC, came into force. Requirements concerning noise and
vibration are made more precise. We, URYU SEISAKU, LTD., measured and declare noise levels and vibration
emission values in accordance with EU Machinery Directive, 2006/42/EC.

Noise Levels
1) Measurement
Noise Levels are measured in accordance with ISO 15744 for hand-held non-electric power tools and EN62841-1 for
electric power tools.

Five microphone positions shall be located 1 m from the geometric centre of the tool. Four
positions shall be spaced at regular intervals on a plane defined as passing through the
geometric centre of the tool and parallel to the reflecting plane; the fifth position shall be
located at a distance of 1 m above the geometric centre of the tool. See the figure 1.

Figure 1 : Microphone Positions

2) Declaration
We declare sound pressure levels (Lp) and sound power level (Lw) in accordance with EU machinery directive, 2006/42/
EC. Sound pressure levels are given as numbers when they are 70dB(A) or over. For tools with sound pressure levels
lower than 70dB(A), we state < 70dB(A). If the sound pressure level exceeds 80dB(A), we also state the sound power
level (Lw) which is 11dB(A) higher than the sound pressure level. To the measured level, 3dB(A) can be added to
incorporate variations in production and method. ISO 15744 and EN62841-1 describes how to calculate these figures.

3) Risk Assessment & Risk Management

Noise is part of everyday life, but loud noise can permanently damage your hearing. Once you lose your
hearing, you can never get it back. Generally hearing loss is gradual. By the time you notice it, it is
probably too late. Manage the risk to exposure to noise at workplace to prevent hearing loss.

-Always use hearing protection in accordance with employer’s instructions and as required by occupational health
and safety regulations. Look after your hearing protection.
-Ensure that the silencer is in place and in good working order when the tool is operating.
N OI SE & VI BRATI ON

We would recommend ‘ISO 9612’ for measurement and assessment of exposure to

noise in a working environment, for risk assessment.

POWER T OOLS G EN E R A L C ATA L O G 87

DECLARATION OF NOISE & VIBRATION EMISSION

NOISE LEVELS AND VIBRATION VALUES

Vibration Values
1) Measurement
Vibration is measured according to the relevant part of ISO 28927 series. For some tools that are not covered by ISO
28927 series, ISO 20643 is used to develop a suitable test procedure.

The new Machinery Directive requires vibration total values. A vibration total value is based on a vibration
measurement in three directions, x, y and z.

Ex. Measurement Locations for Pistol Grip Type Oil-Pulse Tools

Figure 2 : without Support Handle Figure 3: with Support Handle

Oil-pulse tools with a mass less than 2kg are normally operated using only one hand and therefore only the hand
position on the trigger handle is measured. Tools of a mass of 2kg or more are normally operated using both
hands and measurements are made in two positions. For tools without a side handle, the second hand position
is on the front casing or – if that is not possible – on the motor housing (see figure 2). For tools with a side
handle, vibrations are measured in three directions both on the trigger and the support handle (see figure 3). On
the tools intended to be used with two hands, two positions are measured and the position with the higher value
is declared.

The vibration total value (ahv) is the vector sum of the three different directions (ahwx, ahwy & ahwz) at one transducer
position. See the equation (1).

ahv = ahwx2+ ahwy2+ ahwz2 Equation (1) *See 6 Characterization of vibration, 6.4 Combination of vibration directions.

Three different operators carry out three series of five consecutive measurements on each model, using three
different units. Vibration measurement are made in two positions when the tool has mass of 2 kg or over (see figure
2) or when the tool has a support handle (see figure 3). For each hand position,
_
we combine
_
the result from the
three operators into one value (ah), using the arithmetic mean of the three ahv values. ah values for each hand position
are calculated as the arithmetic_mean of the ah values for the different tools on that hand position. The declared
value, ahd, is the highest of the ah values reported for the two hand positions. The uncertainty K value is
N OI SE & V IB RATI ON

estimated by the equation (2).

K = 1.5σt Equation (2) *See Annex B Determination of uncertainty, B.3 Tests on three machines.

2) Declaration
We declare vibration total values (Ahd) and measurement uncertainty (K). Vibration total values are to be given as
numbers when they are 2.5m/s2 or over. For tools with vibration total values lower than 2.5m/s2, we state < 2.5m/s2.
Measurement uncertainty K values are given as numbers.

88 P OW E R TO O LS G E NE R AL C ATALO G
3) Triaxial Vibration Values and Single Direction Vibration Values
There is no fixed relation between triaxial vibration values measured in accordance with ISO 28927 series and one
single direction vibration values measured in accordance with ISO 8662 series. Therefore, it is adequate to compare
values from the same tool type, referring to the same part of the same standard.

Attention ! ISO 28927-2 is applicable to all hand-held tools for threaded fasteners, but ISO 28927-2
adopts a procedure for testing tools with an impact or impulse mechanism using a test device
based on break blocks acting on the outer diameter of a test socket, and a free running test for
other type of tools without an impact or impulse mechanism. Therefore, it may not be adequate to
compare a value from an oil-pulse tool (under load) and one from a nutrunner without impact or
impulse mechanism (free running).

4) Risk Assessment & Risk Management

Using hand-held power tools may cause hand-arm vibration syndrome*1 and carpal tunnel syndrome*2.
We recommend risk assessment and regular health checks of the workforce for early symptoms which
may relate to vibration exposure to prevent problems developing.

*1: Hand-arm vibration syndrome affects the nerves, blood vessels, muscles and joints of the hand, wrist and arm.
It includes vibration white finger, which can cause severe pain in the affected fingers.
*2: Carpal tunnel syndrome is a nerve disorder which may involve pain, tingling, numbness and weakness in parts of the hand,
and can be caused by, among other things, exposure to vibration.

-Manage the risk by reducing the exposure to vibrations.

・Employ work process or a tool which has lower vibrations.
・Employ work process or a tool which can do the job more quickly.
-Check tools and accessories before using them to make sure that they have been properly
maintained and repaired to avoid increased vibration caused by faults or general wear.
-Support the weight of the tool in a stand, tensioner or balancer if possible.
-Avoid gripping or forcing a tool more than you have to. The risk from vibration is generally
greater when the grip force is higher.
-Encourage good blood circulation by:
・keeping your hands warm and dry.
・massaging and exercising your fingers during work breaks.

We would recommend ‘ISO 5349-1’ and ‘ISO 5349-2’ for human exposure to hand-
transmitted vibration measurement at workplace, for risk assessment.

Noise & Vibration Emission Values

N OI SE & VI BRATI ON

The declared values were obtained by laboratory type testing in accordance with the stated standards and
are suitable for comparison with the declared values of other tools tested in accordance with the same
standard. These declared values are not adequate for use in risk assessments. Values measured in
individual work places may be higher. The actual exposure values and risk of harm experienced by an
individual user are unique and depend upon the way the user works, the workpiece and the workstation
design, as well as upon the exposure time and the physical condition of the user.

We, URYU SEISAKU, LTD., cannot be held liable for the consequences of using the declared values,
instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation
over which we have no control.

POWER T OOLS G EN E R A L C ATA L O G 89

DECLARATION OF NOISE & VIBRATION EMISSION

NOISE LEVELS AND VIBRATION VALUES

The uncertainty in the sound levels is 3dB (A).
ISO 28927-2 UA400AMC 78 - < 2.5 0.54
EN62841-1
*measured under load UA500AMC 78 - < 2.5 0.55
Model Sound Pressure Sound Power Vibration Total Vibration UA600AMC 80 - < 2.5 0.55
Level (LpA) Level (LWA) Value (Ahd) Uncertainty (K ) UA700AMC 80 - < 2.5 0.56
dB(A) dB(A) m/sec2 m/sec2 UA800AMC 80 - < 2.5 0.57
Transducerized Battery Pulse Tools UA900AMC 82 93 < 2.5 0.57
UBX-AF500Z < 70 - < 2.5 0.59 UA1000AMC 82 93 < 2.5 0.60
UBX-AF600Z 72 - < 2.5 0.60 UA1300AMC 82 93 < 2.5 0.60
UBX-AF700Z 72 - < 2.5 0.61 UXR-1820MC 84 95 < 2.5 0.6
Pistol Grip Battery Pulse Tools UXR-2000MC 85 96 2.7 0.7
UBX-T70 75 - < 2.5 0.67 Straight Type Transducerized Pulse Tools
UBX-T70(RF8) 75 - < 2.5 0.67 UXR-2400SMC 85 96 3.8 0.8
UBX-T70(Z) 75 - < 2.5 0.67 Pistol Grip Shut-off Pulse Tools
UBX-T80 76 - < 2.5 0.67 UAT30D 76 - < 2.5 0.58
UBX-T80(RF8) 76 - < 2.5 0.67 UAT40 75 - < 2.5 0.54
UBX-T80(Z) 76 - < 2.5 0.67 UAT50 78 - < 2.5 0.55
BP-T40D < 70 - < 2.5 0.54 UAT60 80 - < 2.5 0.57
BP-T50D < 70 - < 2.5 0.54 UAT70 80 - < 2.5 0.59
BP-T60D 73 - < 2.5 0.57 UAT80 80 - < 2.5 0.62
BP-T40 < 70 - < 2.5 0.54 UAT90 82 93 < 2.5 0.63
BP-T50 < 70 - < 2.5 0.54 UAT100 82 93 < 2.5 0.6
BP-T60 71 - < 2.5 0.55 UAT130 82 93 2.6 0.7
BP-T40D(RF8) < 70 - < 2.5 0.54 UAT150 82 93 2.9 0.7
BP-T50D(RF8) < 70 - < 2.5 0.54 UAT180 84 95 3.2 0.7
BP-T60D(RF8) 73 - < 2.5 0.57 UAT200 85 96 2.8 0.7
BP-T40(RF8) < 70 - < 2.5 0.54 UAT40D 75 - < 2.5 0.7
BP-T50(RF8) < 70 - < 2.5 0.54 UAT50D 78 - < 2.5 0.7
BP-T60(RF8) 71 - < 2.5 0.55 UAT60D 80 - < 2.5 0.7
BP-T40D(Z) < 70 - < 2.5 0.54 UAT50L 75 - < 2.5 0.55
BP-T50D(Z) < 70 - < 2.5 0.54 UAT60L 77 - < 2.5 0.58
BP-T60D(Z) 73 - < 2.5 0.57 UAT70L 78 - < 2.5 0.59
BP-T40(Z) < 70 - < 2.5 0.54 UAT80L 78 - < 2.5 0.63
BP-T50(Z) < 70 - < 2.5 0.54 UAT90L 79 - < 2.5 0.6
BP-T60(Z) 71 - < 2.5 0.55 UAT100L 79 - < 2.5 0.6
BP-T40D(TK) < 70 - < 2.5 0.54 UAT130L 79 - < 2.5 0.7
BP-T50D(TK) < 70 - < 2.5 0.54 UAT150L 79 - 2.8 0.7
BP-T60D(TK) 73 - < 2.5 0.57 UAT180L 80 - 3.1 0.7
BP-T40(TK) < 70 - < 2.5 0.54 UAT200L 85 96 2.6 0.7
BP-T50(TK) < 70 - < 2.5 0.54 UAT50DL 75 - < 2.5 0.7
BP-T60(TK) 71 - < 2.5 0.55 UAT60DL 77 - < 2.5 0.7
Pistol Grip Electric Pulse Tools Straight Type Shut-off Pulse Tools
UCX-AF600L 73 - < 2.5 0.60 UAT40S 70 - < 2.5 0.7
UCX-AF600 74 - < 2.5 0.61 UAT50S 78 - 2.7 0.7
UCX-AF700 76 - < 2.5 0.62 UAT60S 80 - 3.1 0.7
UDP-A600LMC, (TL) 74 - < 2.5 0.6 UAT70S 80 - 3.4 0.8
UDP-A700MC, (TL) 76 - < 2.5 0.63 UAT30SD 79 - < 2.5 0.60
UDP-A100MC, (TL) 76 - < 2.5 0.63 UAT40SD 70 - 2.7 0.7
UDP-A120MC, (TL) 78 - < 2.5 0.64 UAT50SD 78 - 3.1 0.7
The noise measurement method of EN62841-1 is much aligned with ISO15744. UAT60SD 80 - 3.5 0.8
UAT50SL 75 - 2.6 0.7
ISO 28927-2 UAT60SL 77 - 3.0 0.7
ISO 15744
*measured under load UAT70SL 78 - 3.2 0.7
Model Sound Pressure Sound Power Vibration Total Vibration UAT50SDL 75 - 2.9 0.7
Level (LpA) Level (LWA) Value (Ahd) Uncertainty (K ) UAT60SDL 77 - 3.4 0.8
dB(A) dB(A) m/sec2 m/sec2 UXR-T2400S 85 96 4.0 0.8
Transducerized Pulse Tools UXR-T3000S 85 96 4.6 0.9
UA40MC 78 - < 2.5 0.53 Angle Head Shut-off Pulse Tools
N OI SE & V IB RATI ON

UA40DMC 78 - < 2.5 0.55 ULT40C 70 - 10.3 1.4

UA50MC 78 - < 2.5 0.54 ULT50C 78 - 15.4 1.8
UA50DMC 78 - < 2.5 0.55 ULT60C 80 - 16.5 1.9
UA60MC 80 - < 2.5 0.54 ULT70C 82 93 16.7 2.0
UA70MC 80 - < 2.5 0.55 ULT70CH 82 93 17.1 2.0
UA80MC 80 - < 2.5 0.56 ULT50CL 75 - 13.6 1.7
UA90MC 82 93 < 2.5 0.58 ULT60CL 78 - 14.8 1.8
UA100MC 82 93 < 2.5 0.60 ULT70CL 78 - 15.2 1.8
UA130MC 82 93 < 2.5 0.63 ULT70CHL 78 - 15.6 1.9
UA150MC 83 94 2.7 0.7 Angle Head Non Shut-Off Pulse Tools
UA40SMC 78 - < 2.5 0.7 UX-500C 82 93 12.4 1.6
UA40SDMC 78 - 2.7 0.7 UX-612C 85 96 14.9 1.8
UA50SMC 78 - 2.7 0.7 UX-700C 85 96 18.6 2.4
UA50SDMC 78 - 3.0 0.7 UX-800C 86 97 20.0 2.0
UA60SMC 80 - 3.1 0.7 UX-900C 90 101 26.0 3.0
UA60SDMC 80 - 3.4 0.8 UX-1000C 90 101 18.9 2.9
UA70SMC 80 - 3.3 0.7 UX-612A 85 96 14.1 1.7

90 P OW E R TO O LS G E NE R AL C ATALO G
The uncertainty in the sound levels is 3dB (A).
Pistol Grip Non Shut-off Pulse Tools UW-6SSRDK 90 101 6.1 1.0
UL30 75 - < 2.5 0.56 UW-6SSHRDK 91 102 7.0 1.1
UL30D 75 - < 2.5 0.57 UW-9SSRK 95 106 10.7 1.4
UL40 75 - < 2.5 0.57 UW-13SSK 97 108 12.7 1.6
UL40D 75 - < 2.5 0.58 UW-22S(IN) 103 114 6.5 1.0
UL50 78 - < 2.5 0.59 UW-22S(SHORT) 103 114 6.6 1.0
UL50D 78 - < 2.5 0.62 UW-22S(LONG) 103 114 6.3 1.0
UL60 80 - < 2.5 0.60 UW-32SLA(SHORT) 109 120 6.2 1.0
UL60D 80 - < 2.5 0.7 UW-32SLA(LONG) 109 120 5.9 1.0
UL70 80 - < 2.5 0.60 UW-381 100 111 7.6 1.1
UL80 80 - < 2.5 0.60 UW-381L 100 111 7.5 1.1
UL90 82 93 < 2.5 0.6 UW-401(SHORT) 110 121 8.9 1.3
UL100 80 - < 2.5 0.6 UW-401L 110 121 9.0 1.3
UL130 83 94 2.7 0.7 Angle Head Impact Wrenches
UL150 84 95 3.0 0.7 UW-6CSLRK 93 104 18.4 2.1
Straight Type Non Shut-off Pulse Tools UW-6CSRK 94 105 18.0 2.1
UL30S 72 - < 2.5 0.7 UW-6CSHRK 94 105 27.0 3.0
UL30SD 75 - 2.5 0.7 UW-6ASLRK 92 103 17.8 2.0
UL40S 72 - 2.9 0.7 UW-9CSRK 95 106 33.0 3
UL40SD 75 - 3.0 0.7 UW-13CSK 97 108 35.0 4
UL50S 78 - 3.3 0.8 Stud Bolt Impact Wrenches
UL50SD 78 - 3.2 0.7 UW-ST6SHK 92 103 4.1 0.8
UL60S 80 - 3.5 0.8 UW-ST9SK 97 108 4.9 0.9
UL60SD 80 - 3.7 0.8 UW-ST10SHK 97 108 5.8 1.0
UL70S 84 95 3.7 0.8 UW-ST6SSHK 92 103 6.6 1.0
Pistol Grip Non Shut-Off Pulse Tools Ratchet Wrenches
U-350D 74 - < 2.5 0.53 URW-6 81 92 3.2 0.7
UXR-2000 85 96 2.6 0.7 URW-60 85 96 3.4 0.8
Straight Type Non Shut-Off Pulse Tools URW-60R 85 96 3.4 0.8
U-310SD 74 - < 2.5 0.57 URW-8N 90 101 3.2 0.7
U-350SD 74 - < 2.5 0.58 URW-80 93 104 4.0 0.8
UX-900S 75 - < 2.5 0.6 URW-80R 93 104 4.0 0.8
UX-1000S 75 - 2.8 0.7 URW-81 93 104 4.0 0.8
UX-1300S 77 - 2.9 0.7 URW-81R 93 104 4.0 0.8
UXR-2000S 85 96 3.2 0.7 URW-8 86 97 3.3 0.8
UXR-2400S 85 96 4.1 0.8 URW-9N 90 101 3.3 0.7
UXR-3000S 85 96 4.7 0.9 URW-10N 90 101 3.3 0.8
Stud Bolt Non Shut-off Pulse Tools URW-12N 91 102 3.6 0.8
UX-ST800 75 - < 2.5 0.54 URW-12NA 91 102 3.6 0.8
UX-ST1000 75 - < 2.5 0.56 URW-12NB 91 102 4.1 0.8
Pistol Grip Impact Wrenches
UW-6SLRK 91 102 3.8 0.8 ISO 28927-2
ISO15744
UW-6SHBRK 92 103 4.3 0.8 *measured at free running
UW-B6SLK 92 103 4.2 0.8 Model Sound Pressure Sound Power Vibration Total Vibration
UW-6SLRDK 91 102 4.1 0.8 Level (LpA) Level (LWA) Value (Ahd) Uncertainty (K )
UW-6SHBRDK 91 102 4.6 0.9 dB(A) dB(A) m/sec2 m/sec2
UW-B6SLDK 92 103 4.8 0.9 Open-Ended Wrenches
UW-61ERK 91 102 4.0 0.8 UOW-11-10 76 - < 2.5 0.47
UW-101ERK 96 107 5.8 1.0 UOW-11-14 76 - < 2.5 0.47
UW-131ERK 97 108 7.6 1.1 UOW-11-22 76 - < 2.5 0.47
UW-161ER 96 107 6.3 1.0 UOW-11-30 76 - < 2.5 0.47
UW-8SHRK 93 104 5.6 1.0 UOW-T60-10 76 - < 2.5 0.47
UW-9SRK 93 104 5.1 0.9 UOW-T60-14 76 - < 2.5 0.47
UW-10SHRK 95 106 5.8 1.0 UOW-T60-22 76 - < 2.5 0.47
UW-13SRK 95 106 7.7 1.1 UOW-T60-30 76 - < 2.5 0.48
UW-140P 93 104 6.3 1.0 Geared Wrenches
UW-140PR 93 104 6.6 1.0 UGW-6N 76 - < 2.5 0.48
N OI SE & VI BRATI ON

UW-140PL 93 104 6.4 1.0 UGW-8N 76 - < 2.5 0.48

UW-140PRL 93 104 6.7 1.0 Angle Nutrunners
UW-220P 95 106 5.6 1.0 UAN-611R-60C 80 - < 2.5 0.48
UW-220PL 95 106 5.7 1.0 UAN-611R-50C 80 - < 2.5 0.48
UW-251P 95 106 5.7 1.0 UAN-611R-40C 80 - < 2.5 0.48
UW-251PL 95 106 5.8 1.0 UAN-611R-30C 80 - < 2.5 0.48
UW-O22S(SHORT) 103 114 6.0 1.0 UAN-701R-60C 85 96 < 2.5 0.51
UW-O22S(LONG) 103 114 5.7 1.0 UAN-701R-40C 85 96 < 2.5 0.50
UW-O32S(SHORT) 109 120 6.2 1.0 UAN-701R-30C 85 96 < 2.5 0.50
UW-O32S(LONG) 109 120 5.9 1.0 UAN-611RM-60C 80 - < 2.5 0.49
UW-381P 99 110 6.2 1.0 UAN-611RM-50C 80 - < 2.5 0.48
UW-381PL 99 110 6.0 1.0 UAN-611RM-40C 80 - < 2.5 0.48
Straight Type Impact Wrenches UAN-611RM-30C 80 - < 2.5 0.48
UW-6SSLRK 90 101 5.3 0.9 UAN-701RM-60C 85 96 < 2.5 0.51
UW-6SSRK 90 101 5.0 0.9 UAN-701RM-40C 85 96 < 2.5 0.50
UW-6SSHRK 91 102 6.7 1.1 UAN-701RM-30C 85 96 < 2.5 0.50
UW-6SSLRDK 90 101 6.0 1.0

POWER T OOLS G EN E R A L C ATA L O G 91

DECLARATION OF NOISE & VIBRATION EMISSION

NOISE LEVELS AND VIBRATION VALUES

The uncertainty in the sound levels is 3dB (A).
Straight Screwdrivers US-5W 85 96 4.7 0.9
US-LT10B 75 - < 2.5 0.48 US-6W 85 96 4.9 0.9
US-LT20A(B)-26 71 - < 2.5 0.48 US-350PW 81 92 2.8 0.7
US-LT20A(B)-18 70 - < 2.5 0.48 US-450PW 79 - 2.9 0.7
US-LT20A(B)-10 70 - < 2.5 0.48 US-5PW 85 96 2.8 0.7
US-LT30A(B)-23 71 - < 2.5 0.48 US-6PW 85 96 3.0 0.7
US-LT30A(B)-17 70 - < 2.5 0.48 US-652PW 79 - 3.7 0.8
US-LT30A(B)-11 70 - < 2.5 0.48
US-LT40A(B)-21 74 - < 2.5 0.48 ISO 15744 ISO 28927-12
US-LT40A(B)-15 70 - < 2.5 0.48 Sound Pressure Sound Power Vibration Total Vibration
US-LT40A(B)-08 70 - < 2.5 0.48 Model
Level (LpA) Level (LWA) Value (Ahd) Uncertainty (K )
US-LT50B-17 75 - < 2.5 0.48 dB(A) dB(A) m/sec2 m/sec2
US-LT50B-08 75 - < 2.5 0.48
Die Grinders
US-LT50B-05 74 - < 2.5 0.49
UG-25NA 82 93 < 2.5 0.60
US-LT30A(B)L-23 71 - < 2.5 0.48
G-38EB 85 96 < 2.5 0.6
US-LT30A(B)L-17 70 - < 2.5 0.48
UG-38N 85 96 < 2.5 0.6
US-LT30A(B)L-11 70 - < 2.5 0.48
UG-38NA 75 - < 2.5 0.6
US-LT40BL-21 74 - < 2.5 0.48
UG-38NL 85 96 4.0 0.8
US-LT40A(B)L-15 70 - < 2.5 0.48
UG-50S-200 73 - 2.6 0.7
US-LT40BL-08 70 - < 2.5 0.48
UG-25NSA 82 93 < 2.5 0.59
Pistol Grip Screwdrivers
UG-38NS 85 96 < 2.5 0.7
US-LT31PB-23 70 - < 2.5 0.48
UG-38NSA 75 - < 2.5 0.7
US-LT31PB-17 70 - < 2.5 0.48
UG-38NSL 85 96 4.1 0.8
US-LT31PB-11 70 - < 2.5 0.48
UMG-450 75 - < 2.5 0.58
US-LT31PB-05 70 - < 2.5 0.48
UG-45H 76 - < 2.5 0.63
US-LT41PB-21 74 - < 2.5 0.48
UG-50S-200A 75 - 2.8 0.7
US-LT41PB-15 70 - < 2.5 0.48
US-LT41PB-08 70 - < 2.5 0.48
ISO 15744 ISO 28927-4
US-LT51PB-17 75 - < 2.5 0.48
US-LT51PB-08 75 - < 2.5 0.48 Sound Pressure Sound Power Vibration Total Vibration
Model
Level (LpA) Level (LWA) Value (Ahd) Uncertainty (K )
US-LT51PB-05 74 - < 2.5 0.49
US-LT60P-11 77 - < 2.5 0.48 dB(A) dB(A) m/sec2 m/sec2
US-LT60P-07 76 - < 2.5 0.49 Straight Grinders
US-LT60P-03 75 - < 2.5 0.49 UG-65E 88 99 < 2.5 0.6
Angle Head Screwdrivers UG-65ER 85 96 < 2.5 0.6
US-LT30B-17C 73 - < 2.5 0.48 UG-65EL 85 96 < 2.5 0.7
US-LT30B-11C 73 - < 2.5 0.48 UG-65EB 95 106 < 2.5 0.7
US-LT40B-15C 75 - < 2.5 0.48 UG-65EBR 95 106 < 2.5 0.7
US-LT40B-08C 75 - < 2.5 0.48 UG-65EBL 95 106 < 2.5 0.7
US-LT40B-05C 75 - < 2.5 0.48 UG-650E 85 96 < 2.5 0.7
US-LT40-08C(P) 75 - < 2.5 0.48 UG-650ER 85 96 2.5 0.7
US-LT40-05C(P) 75 - < 2.5 0.48 UG-650EL 85 96 < 2.5 0.7
US-LT40-03C(P) 72 - < 2.5 0.48 UG-1250-72 88 99 < 2.5 0.7
Cushion Clutch Type Screwdrivers UG-1250L-72 88 99 < 2.5 0.7
US-3.5A 75 - < 2.5 0.48 UG-1500-60 88 99 < 2.5 0.48
US-3.5B 75 - < 2.5 0.48 UG-1500-41 88 99 < 2.5 0.44
US-4 75 - < 2.5 0.48 UG-1500L-60 88 99 < 2.5 0.45
US-5 75 - < 2.5 0.48 UG-1500L-41 88 99 < 2.5 0.41
US-3.5MA 75 - < 2.5 0.48
US-40 70 - < 2.5 0.48 ISO 15744 ISO 28927-1
US-50 76 - < 2.5 0.48 Sound Pressure Sound Power Vibration Total Vibration
Model
US-3.5PB 75 - < 2.5 0.48 Level (LpA) Level (LWA) Value (Ahd) Uncertainty (K )
US-4PB 75 - < 2.5 0.48 dB(A) dB(A) m/sec2 m/sec2
US-5PB 75 - < 2.5 0.48 Angle Grinders
US-4CA 85 96 < 2.5 0.48 AG-50 80 - < 2.5 0.7
US-5CA 85 96 < 2.5 0.48 AG-50L 80 - < 2.5 0.7
Direct Drive Screwdrivers
N OI SE & V IB RATI ON

AG-100L 80 - < 2.5 0.55

US-LD40P-21 74 - < 2.5 0.48 AG-100S 80 - < 2.5 0.51
US-LD40P-15 70 - < 2.5 0.48 AG-100SL 80 - < 2.5 0.52
US-LD40P-08 70 - < 2.5 0.48 USG-4S 80 - 3.5 1.1
US-LD50P-17 75 - < 2.5 0.48 USG-7S 85 96 4.7 1.4
US-LD50P-08 75 - < 2.5 0.48 USG-L180D 85 96 4.6 1.4
US-LD50P-05 74 - < 2.5 0.49 Vertical Grinders
US-3.5ACB 85 96 < 2.5 0.48 USG-4VL 88 99 < 2.5 0.6
USG-5VLA 88 99 < 2.5 0.7
ISO 28927-2 UVG-1500SL-76 78 - 4.0 1.2
ISO15744
*measured under load UVG-1500SL-84 78 - 3.9 1.2
Model Sound Pressure Sound Power Vibration Total Vibration UVG-1800SL-76 78 - 4.2 1.3
Level (LpA) Level (LWA) Value (Ahd) Uncertainty (K ) UVG-1800SL-84 78 - 4.1 1.3
dB(A) dB(A) m/sec2 m/sec2 UVG-2300SL-59 82 93 4.1 1.2
Impact Screwdrivers Angle Grinders
US-350W 80 - 3.6 0.8 UAG-40SB-136 84 95 4.1 1.2
US-450WB 80 - 3.8 0.8 UAG-40SBL-136 84 95 4.1 1.3
US-45W 80 - 4.0 0.8 UAG-40SC-136 84 95 4.1 1.3

92 P OW E R TO O LS G E NE R AL C ATALO G
The uncertainty in the sound levels is 3dB (A).
UAG-40SCL-136 84 95 4.1 1.3 UD-80S-07 79 - < 2.5 0.6
UAG-50SBL-120 82 93 4.1 1.2 UD-80S-04 79 - < 2.5 0.6
UAG-50SCL-120 82 93 4.1 1.2 UD-80-12G 79 - < 2.5 0.65
UAG-50SC-120 82 93 4.0 1.2 UD-80-07G 79 - < 2.5 0.65
UAG-50SB-109 82 93 4.0 1.2 UD-80-04G 79 - < 2.5 0.63
UAG-50SBL-109 82 93 4.0 1.2 Angle Head Drills
UAG-70SBL-76 83 94 5.2 1.6 UD-50S-45A 79 - < 2.5 0.68
UAG-70SB-76 83 94 5.2 1.6 UD-50S-22A 79 - < 2.5 0.67
UAG-70SC-76 83 94 5.2 1.6 UD-60S-29C 79 - < 2.5 0.7
UAG-70SCL-76 83 94 5.2 1.6 UD-60S-15C 79 - < 2.5 0.69
UAG-90SBL-59 88 99 6.0 1.8
ISO 15744 ISO 28927-10
ISO 15744 ISO 28927-3 Sound Pressure Sound Power Vibration Total Vibration
Model
Sound Pressure Sound Power Vibration Total Vibration Level (LpA) Level (LWA) Value (Ahd) Uncertainty (K )
Model
Level (LpA) Level (LWA) Value (Ahd) Uncertainty (K ) dB(A) dB(A) m/sec2 m/sec2
dB(A) dB(A) m/sec 2
m/sec 2
Heavy Duty Drills
Sanders & Polishers URD-22RR 95 106 < 2.5 0.7
USG-45P 81 92 < 2.5 0.63 Pistol/Straight Super Vibration-Proof Riveting Hammers
AG-180W 86 97 < 2.5 0.7 BRH-1UD (R, H) 89 100 < 2.5 0.7
UP-80-15 82 93 < 2.5 0.55 BRH-1USD(R, H) 89 100 < 2.5 0.7
UP-80-40 84 95 < 2.5 0.56 BRH-5UD (R, H) 89 100 < 2.5 0.7
UP-80-60 85 96 < 2.5 0.57 BRH-5USD (R, H) 89 100 < 2.5 0.7
UP-15 87 98 6.3 1.0 Pistol/Straight Type Riveting Hammers
UP-25DB 73 - 5.5 0.9 SBH-0 90 101 < 2.5 0.6
UP-26DB 74 - 5.8 0.9 SBH-1A (R, H) 92 103 4.5 0.9
UP-15N 94 105 6.4 1.0 BRH-1U (R, H) 95 106 7.8 1.1
UP-25NB 97 108 5.9 0.9 BRH-1US (R, H) 95 106 7.5 1.1
UP-26NB 98 109 6.0 1.0 BRH-1UG (R, H) 95 106 7.5 1.1
BRH-5U (R, H) 95 106 7.6 1.1
ISO 15744 ISO 28927-5 BRH-5US (R, H) 95 106 7.4 1.1
BRH-5UG (R, H) 95 106 7.3 1.1
Sound Pressure Sound Power Vibration Total Vibration
Model Impact Cutters & Flux Chippers
Level (LpA) Level (LWA) Value (Ahd) Uncertainty (K )
BRH-7 (R, H) 100 111 7.5 1.1
dB(A) dB(A) m/sec2 m/sec2
UFC-0N 90 101 6.0 1.0
Pistol-Grip Drills
UFC-1N 90 101 5.9 1.0
UD-50-200 73 - < 2.5 0.61
Chipping & Caulking Hammers
UD-50-45 72 - < 2.5 0.58
AA-00 (R,H) 95 106 5.0 0.9
UD-50-22 72 - < 2.5 0.59
AA-20 (R,H) 100 111 5.6 1.0
UD-60-29 77 - < 2.5 0.61
AA-30 (R,H) 100 111 6.0 1.0
UD-60-20 77 - < 2.5 0.60
AA-40 (R,H) 100 111 6.3 1.0
UD-60-15 76 - < 2.5 0.57
PB-20 (R, H) 100 111 6.6 1.0
UD-60-07 75 - < 2.5 0.58
PB-30 (R, H) 100 111 7.1 1.1
UD-60-04 75 - < 2.5 0.57
UD-80-12 79 - < 2.5 0.60
ISO 15744 ISO 20643
UD-80-07 79 - < 2.5 0.6
UD-80-04 79 - < 2.5 0.62 Sound Pressure Sound Power Vibration Total Vibration
Model
Level (LpA) Level (LWA) Value (Ahd) Uncertainty (K )
Straight Drills
UD-50S-200 78 - < 2.5 0.6 dB(A) dB(A) m/sec2 m/sec2
UD-50S-45 77 - < 2.5 0.61 Tappers
UD-50S-22 77 - < 2.5 0.61 UT-66B-15 85 96 < 2.5 0.61
UD-60S-29 77 - < 2.5 0.6 UT-66B-07 85 96 < 2.5 0.61
UD-60S-20 77 - < 2.5 0.68 UT-60-07 75 - < 2.5 0.69
UD-60S-15 77 - < 2.5 0.67 UT-60-04 75 - < 2.5 0.59
UD-60S-07 75 - < 2.5 0.63 UT-60S-07 75 - < 2.5 0.59
UD-60S-04 75 - < 2.5 0.63 UT-60S-04 75 - < 2.5 0.56
UD-80S-12 79 - < 2.5 0.6
N OI SE & VI BRATI ON

POWER T OOLS G EN E R A L C ATA L O G 93

CONVERSION TABLE

CONVERSION TABLE
TORQUE HORSE POWER
Unit to be Unit to be
Nm kgf.cm kgf.m in.Ibs ft.Ibs kw kgf m/s PS HP
converted converted
1Nm - 10.2 0.102 8.8 0.74 kw 1 1.02×102 1.36 1.34
1kgf.cm 0.098 - 0.01 0.868 0.072 kgf m/s 9.8×10-5 1 1.33×10-2 1.32×10-2
1kgf.m 9.8 100 - 86.8 7.2 PS 0.74 75 1 0.99
1in.Ibs 0.114 1.152 1.16×10-2 - 8.3×10-2 HP 0.75 76 1.01 1
1ft.Ibs 1.36 13.83 0.138 12 -
FLOW
Unit to be m3/s m3/min I/s ft3/s
converted
3 3
m /s 1 60 1.00×10 35
m3/min 1.67×10-2 1 17 0.59
I/s 1.00×10-3 6.0×10-2 1 3.5×10-2
ft3/s 2.8×10-2 1.7 28 1
PRESSURE
Unit to be MPa Bar kgf/cm2 psi LENGTH
converted
2
WEIGHT Unit to be m in ft
MPa 1 10 10.2 1.44×10 Unit to be converted
Bar 10 1 1.02 14.4 kg Ibs m 1 39 3.3
converted
kgf/cm2 9.8×10-2 0.98 1 14.1 kg 1 2.2 in 2.54×10-2 1 8.3×10-2
psi 6.9×10-2 6.9×10-2 7.1×10-2 1 Ibs 0.45 1 ft 0.31 12.0 1

INDIVIDUAL CATALOG SHEETS AND PARTS LISTS ARE AVAILABLE FOR FURTHER INFORMATION.
N OI SE & V IB RATI ON

94 P OW E R TO O LS G E NE R AL C ATALO G
MEMO

POWER T OOLS G EN E R A L C ATA L O G 95

INDEX Model names of models listed in this catalog are listed in ABC order.

AA-00（R,H） 75 UA1300AMC 29 UD-50-22 68 UHT-25 81 US-6W 56 UTM-1500A/E（RA-CN） 46

AA-20（R,H） 75 UAG-40SB-136 62 UD-50-45 68 UHT-35 81 US-40 54 UTM-1500A/E（RA-PS） 46
AA-30（R,H） 75 UAG-40SBL-136 62 UD-50-200 68 UHT-50 81 US-45W 56 UVG-1500SL-76 61
AA-40（R,H） 75 UAG-40SC-136 62 UD-50S-22 68 UL30 34 US-50 54 UVG-1500SL-84 61
AG-50（OUT） 60 UAG-40SCL-136 62 UD-50S-22A 69 UL30D 34 US-350PW 56 UVG-1800SL-76 61
AG-50L（OUT） 60 UAG-50SB-109 62 UD-50S-45 68 UL30S 34 US-350W 56 UVG-1800SL-84 61
AG-100L（IN） 60 UAG-50SBL-109 62 UD-50S-45A 69 UL30SD 34 US-450PW 56 UVG-2300SL-59 61
AG-100L（OUT） 60 UAG-50SBL-120 62 UD-50S-200 68 UL40 34 US-450WB 56 UW-6ASLRK 43
AG-100S（IN） 60 UAG-50SC-120 62 UD-60-04 68 UL40D 34 US-652PW 56 UW-6CSHRK 43
AG-100S（OUT） 60 UAG-50SCL-120 62 UD-60-07 68 UL40S 34 US-LD40P-08 55 UW-6CSLRK 43
AG-100SL（IN） 60 UAG-70SB-76 62 UD-60-15 68 UL40SD 34 US-LD40P-15 55 UW-6CSRK 43
AG-100SL（OUT） 60 UAG-70SBL-76 62 UD-60-20 68 UL50 34 US-LD40P-21 55 UW-6SHBRK 42
AG-180W 64 UAG-70SC-76 62 UD-60-29 68 UL50D 34 US-LD50P-05 55 UW-6SLRK 42
BP-T40 14 UAG-70SCL-76 62 UD-60S-04 68 UL50S 34 US-LD50P-08 55 UW-6SSHRK 43
BP-T40（RF8） 15 UAG-90SBL-59 62 UD-60S-07 68 UL50SD 34 US-LD50P-17 55 UW-6SSLRK 43
BP-T40（TK） 16 UAN-611R-30C 39 UD-60S-15 68 UL60 34 US-LT10B 52 UW-6SSRK 43
BP-T40（Z） 15 UAN-611R-40C 39 UD-60S-15C 69 UL60D 34 US-LT20A-10 52 UW-8SHRK 42
BP-T40D 14 UAN-611R-50C 39 UD-60S-20 68 UL60S 34 US-LT20A-18 52 UW-9CSRK 43
BP-T40D（RF8） 15 UAN-611R-60C 39 UD-60S-29 68 UL60SD 34 US-LT20A-26 52 UW-9SRK 42
BP-T40D（TK） 16 UAN-611RM-30C 39 UD-60S-29C 69 UL70 34 US-LT20B-10 52 UW-9SSRK 43
BP-T40D（Z） 15 UAN-611RM-40C 39 UD-80-04 68 UL70S 34 US-LT20B-18 52 UW-10SHRK 42
BP-T50 14 UAN-611RM-50C 39 UD-80-04G 68 UL80 34 US-LT20B-26 52 UW-13CSK 43
BP-T50（RF8） 15 UAN-611RM-60C 39 UD-80-07 68 UL90 34 US-LT30A-11 52 UW-13SRK 42
BP-T50（TK） 16 UAN-701R-30C 39 UD-80-07G 68 UL100 34 US-LT30A-17 52 UW-13SSK 43
BP-T50（Z） 15 UAN-701R-40C 39 UD-80-12 68 UL130 34 US-LT30A-23 52 UW-22S 43
BP-T50D 14 UAN-701R-60C 39 UD-80-12G 68 UL150 34 US-LT30AL-11 52 UW-22S（L） 43
BP-T50D（RF8） 15 UAN-701RM-30C 39 UD-80S-04 68 ULT40C 35 US-LT30AL-17 52 UW-32SLA 43
BP-T50D（TK） 16 UAN-701RM-40C 39 UD-80S-07 68 ULT50C 35 US-LT30AL-23 52 UW-32SLA（L） 43
BP-T50D（Z） 15 UAN-701RM-60C 39 UD-80S-12 68 ULT50CL 35 US-LT30B-11 52 UW-61ERK 42
BP-T60 14 UAT30D 33 UDP-A100MC,（TL） 23 ULT60C 35 US-LT30B-11C 53 UW-75S 45
BP-T60（RF8） 15 UAT30SD 33 UDP-A120MC,（TL） 23 ULT60CL 35 US-LT30B-17 52 UW-75S（1 1/2） 45
BP-T60（TK） 16 UAT40 33 UDP-A600LMC,（TL） 23 ULT70C 35 US-LT30B-17C 53 UW-101ERK 42
BP-T60（Z） 15 UAT40D 33 UDP-A700MC,（TL） 23 ULT70CH 35 US-LT30B-23 52 UW-131ERK 42
BP-T60D 14 UAT40S 33 UDT-25A/E 79 ULT70CHL 35 US-LT30BL-11 52 UW-140P 44
BP-T60D（RF8） 15 UAT40SD 33 UDT-200A/E 78 ULT70CL 35 US-LT30BL-17 52 UW-140PL 44
BP-T60D（TK） 16 UAT50 33 UDT-500A/E 78 UMG-450 59 US-LT30BL-23 52 UW-140PR 44
BP-T60D（Z） 15 UAT50D 33 UEC-4801A/E 25 UOW-11-10 38 US-LT31PB-05 53 UW-140PRL 44
BRH-1U（R,H） 72 UAT50DL 33 UEC-4801A/E（ANGLE）25 UOW-11-14 38 US-LT31PB-11 53 UW-161ER 42
BRH-1UD（R,H） 72 UAT50L 33 UEC-4801TPA/E 25 UOW-11-22 38 US-LT31PB-17 53 UW-220P 44
BRH-1UG（R,H） 72 UAT50S 33 UEC-4801TPA/E（ANGLE）25 UOW-11-30 38 US-LT31PB-23 53 UW-220PL 44
BRH-1US（R,H） 72 UAT50SD 33 UEC-5500A/E 27 UOW-T60-10 38 US-LT40-03C（P） 53 UW-251P 44
BRH-1USD（R,H） 72 UAT50SDL 33 UECP-4811A/E 22 UOW-T60-14 38 US-LT40-05C（P） 53 UW-251PL 44
BRH-5U（R,H） 72 UAT50SL 33 UECP-4900A 20 UOW-T60-22 38 US-LT40-08C（P） 53 UW-381 44
BRH-5UD（R,H） 72 UAT60 33 UECP-4900E 20 UOW-T60-30 38 US-LT40A-08 52 UW-381L 44
BRH-5UG（R,H） 72 UAT60D 33 UET-10CUA（115V） 80 UP-15 64 US-LT40A-15 52 UW-381P 44
BRH-5US（R,H） 72 UAT60DL 33 UET-10CUE（230V） 80 UP-15N 64 US-LT40A-21 52 UW-381PL 44
BRH-5USD（R,H） 72 UAT60L 33 UFC-0N 74 UP-25DB 64 US-LT40AL-15 52 UW-401 43
BRH-7（H） 74 UAT60S 33 UFC-1N 74 UP-25NB 64 US-LT40B-05C 53 UW-401L 43
BRH-7（R） 74 UAT60SD 33 UFT-6 81 UP-26DB 64 US-LT40B-08 52 UW-550 45
G-38EB 59 UAT60SDL 33 UFT-10 81 UP-26NB 64 US-LT40B-08C 53 UW-B6SLK 42
PB-20（R,H） 75 UAT60SL 33 UFT-16 81 UP-80-15 64 US-LT40B-15 52 UW-O22S 43
PB-30（R,H） 75 UAT70 33 UFT-24 81 UP-80-40 64 US-LT40B-15C 53 UW-O32S 43
SBH-0 72 UAT70L 33 UG-25NA 59 UP-80-60 64 US-LT40B-21 52 UW-ST6SHK 45
SBH-1A（R,H） 72 UAT70S 33 UG-25NSA 59 URD-22RR 70 US-LT40BL-08 52 UW-ST6SSHK 45
U-310SD 36 UAT70SL 33 UG-38N 59 URW-6 37 US-LT40BL-15 52 UW-ST9SK 45
U-350D 36 UAT80 33 UG-38NA 59 URW-8 37 US-LT40BL-21 52 UW-ST10SHK 45
U-350SD 36 UAT80L 33 UG-38NL 59 URW-8N 37 US-LT41PB-08 53 UX-500C 35
UA40DMC 31 UAT90 33 UG-38NS 59 URW-9N 37 US-LT41PB-15 53 UX-612A 35
UA40MC 31 UAT90L 33 UG-38NSA 59 URW-10N 37 US-LT41PB-21 53 UX-612C 35
UA40SDMC 31 UAT100 33 UG-38NSL 59 URW-12N 37 US-LT50B-05 52 UX-700C 35
UA40SMC 31 UAT100L 33 UG-45H 59 URW-12NA 37 US-LT50B-08 52 UX-800C 35
UA50DMC 31 UAT130 33 UG-50S-200 59 URW-12NB 37 US-LT50B-17 52 UX-900C 35
UA50MC 31 UAT130L 33 UG-50S-200A 59 URW-60 37 US-LT51PB-05 53 UX-900S 36
UA50SDMC 31 UAT150 33 UG-65E 60 URW-60R 37 US-LT51PB-08 53 UX-1000C 35
UA50SMC 31 UAT150L 33 UG-65EB 60 URW-80 37 US-LT51PB-17 53 UX-1000S 36
UA60MC 31 UAT180 33 UG-65EBL 60 URW-80R 37 US-LT60P-03 53 UX-1300S 36
UA60SDMC 31 UAT180L 33 UG-65EBR 60 URW-81 37 US-LT60P-07 53 UX-ST800 36
UA60SMC 31 UAT200 33 UG-65EL 60 URW-81R 37 US-LT60P-11 53 UX-ST1000 36
UA70MC 31 UAT200L 33 UG-65ER 60 US-3.5A 54 USG-4S 60 UXR-1820MC 31
UA70SMC 31 UBX-AF500Z 12 UG-650E 60 US-3.5ACB 54 USG-4VL 61 UXR-2000 36
UA80MC 31 UBX-AF600Z 12 UG-650EL 60 US-3.5B 54 USG-5VLA 61 UXR-2000MC 31
UA90MC 31 UBX-AF700Z 12 UG-650ER 60 US-3.5MA 54 USG-7S 60 UXR-2000S 36
I ND EX

UA100MC 31 UBX-T70 13 UG-1250-72 63 US-3.5PB 54 USG-45P 64 UXR-2400S 36

UA130MC 31 UBX-T70（RF8） 13 UG-1250L-72 63 US-4 54 USG-L180D 60 UXR-2400SMC 31
UA150MC 31 UBX-T70（Z） 13 UG-1500-41 63 US-4CA 54 UT-60-04 70 UXR-3000S 36
UA400AMC 29 UBX-T80 13 UG-1500-60 63 US-4PB 54 UT-60-07 70 UXR-T2400S 33
UA500AMC 29 UBX-T80（RF8） 13 UG-1500L-41 63 US-5 54 UT-60S-04 70 UXR-T3000S 33
UA600AMC 29 UBX-T80（Z） 13 UG-1500L-60 63 US-5CA 54 UT-60S-07 70
UA700AMC 29 UCC-100Z 11 UGW-6N 38 US-5PB 54 UT-66B-07 70
UA800AMC 29 UCX-AF600 21 UGW-8N 38 US-5PW 56 UT-66B-15 70
UA900AMC 29 UCX-AF600L 21 UHT-12 81 US-5W 56 UTM-1500A/E（CN） 46
UA1000AMC 29 UCX-AF700 21 UHT-16 81 US-6PW 56 UTM-1500A/E（PS） 46

96 P OW E R TO O LS G E NE R AL C ATALO G
URYU
NETWORK
URYU have gained market share with the highest
satisfaction of our customers not only island but also far
abroad in more than 40 countries through a world-
wide network of independent distributors
who offer tool inspection, repair,
SE N D A I
testing, maintenance
and quick
delivery. JAPAN KIT A - KA N T O H EAD OFFIC E
F ACTORIES
T OKYO
KA N A GA W A SALES D EP OT S
N A GOYA
T OYOT A

OKA YA M A OSA KA
T OYOH A SH I
KA M IJ I
NARA
H IR OSH IM A

KYU SH U

RUSSIA & C.I.S.

EUROPE

N O RT H AMERIC A

MIDDLE EAST
ASIA
MIDDLE AMERIC A

WORLD
SO U T H AM ERI CA
AFRICA
O C EAN IA

O V E RS E AS MARK ETS

POWER T OOLS G EN E R A L C ATA L O G 97

POWER TOOLS GENERAL CATALOG URYU
BOLT & NUT SETTERS / SCREWDRIVERS / ABRASIVE TOOLS / Power
Tools
DRILLS & TAPPERS / PERCUSSION TOOLS / TESTERS & ACCESSORIES

ww w .u r y u .c o .jp

www.uryu.co .jp

Specifications & contents are subject to change without notice.

DISTRIBUTED BY :

P.O. Box 7 Higashinari, Osaka, Japan.

Telephone No : 816-6973-9414~9415
Fax : 816-6972-0346
E-Mail : [email protected]
https : //www.uryu.co.jp

22-03
Printed in Japan
(DAI-22-03-1523)

Buku Manual F1ZR (4WHH-4WHJ)
84% (101)
Buku Manual F1ZR (4WHH-4WHJ)
65 pages
Dometic Service Manual MC16, M27, M28, MA35, MA40, M50, M52, MA52, MB52, M70
0% (1)
Dometic Service Manual MC16, M27, M28, MA35, MA40, M50, M52, MA52, MB52, M70
52 pages
Werkstatthandbuch Honda BF130 PDF
100% (3)
Werkstatthandbuch Honda BF130 PDF
486 pages
Spindelhubtisch-Spindel Lifting Table TASK PDF
No ratings yet
Spindelhubtisch-Spindel Lifting Table TASK PDF
17 pages
Fisher 500tx Service Manual
No ratings yet
Fisher 500tx Service Manual
38 pages
Getting Started Guide MAN
No ratings yet
Getting Started Guide MAN
133 pages
Business Pages 2011 v2
100% (1)
Business Pages 2011 v2
52 pages
OME-5200LA-01H Inst Manual
No ratings yet
OME-5200LA-01H Inst Manual
26 pages
Bosch Power Tools
No ratings yet
Bosch Power Tools
152 pages
3.wiring Diagram Loto 2 System, Esd Cabin, ST Light Amber)
No ratings yet
3.wiring Diagram Loto 2 System, Esd Cabin, ST Light Amber)
2 pages
d45ks d50ks Brochure English
No ratings yet
d45ks d50ks Brochure English
12 pages
Horizontal /vertical Metal Cutting Band Saw: Instruction Manual
No ratings yet
Horizontal /vertical Metal Cutting Band Saw: Instruction Manual
19 pages
7280kg Isuzu Cp-4Le2Xa-S 5 Year / 5,000 Hour: Product Info
No ratings yet
7280kg Isuzu Cp-4Le2Xa-S 5 Year / 5,000 Hour: Product Info
2 pages
HP LFP Signage and Display
No ratings yet
HP LFP Signage and Display
78 pages
Turbocharger (T12) : Specifications
No ratings yet
Turbocharger (T12) : Specifications
2 pages
Blasting Basics - Empire Abrasive
No ratings yet
Blasting Basics - Empire Abrasive
5 pages
Craftsman 2010-2011
No ratings yet
Craftsman 2010-2011
213 pages
Cross Reference Xtreme Filters
No ratings yet
Cross Reference Xtreme Filters
3 pages
VisionLink Administrator Customer Guide
No ratings yet
VisionLink Administrator Customer Guide
3 pages
Cat Engine c32
No ratings yet
Cat Engine c32
5 pages
Caterpillar ISO Symbols
100% (1)
Caterpillar ISO Symbols
55 pages
Circular Saw Manual Makita
No ratings yet
Circular Saw Manual Makita
16 pages
SK Tools 2020 Brand Standards 4-16-2020
No ratings yet
SK Tools 2020 Brand Standards 4-16-2020
31 pages
Ammco 800OTV Operation Manual
No ratings yet
Ammco 800OTV Operation Manual
27 pages
VIC 0301 0215 Installation Instructions
100% (1)
VIC 0301 0215 Installation Instructions
6 pages
Smartroc D65: DTH Surface Drill Rig For Quarrying and Mining
No ratings yet
Smartroc D65: DTH Surface Drill Rig For Quarrying and Mining
5 pages
Reuse Final Drive
No ratings yet
Reuse Final Drive
65 pages
IntercompanyProcessing PDF
No ratings yet
IntercompanyProcessing PDF
42 pages
Dyson Big Ball Cy23 Operating Manual
No ratings yet
Dyson Big Ball Cy23 Operating Manual
16 pages
2015 Pricing Guide 1
No ratings yet
2015 Pricing Guide 1
8 pages
Runner Training Material For Dealers
No ratings yet
Runner Training Material For Dealers
50 pages
Komatsu
100% (1)
Komatsu
28 pages
Pest Inspection Checklist
No ratings yet
Pest Inspection Checklist
8 pages
Mounthly Service Schedule
No ratings yet
Mounthly Service Schedule
4 pages
Siria: Al Frat
No ratings yet
Siria: Al Frat
57 pages
Gravely Manual
No ratings yet
Gravely Manual
34 pages
Saber BDS69 100379 Belt Disc Sander BDS-69 MANUAL
No ratings yet
Saber BDS69 100379 Belt Disc Sander BDS-69 MANUAL
14 pages
PT Catalogue 2023
100% (1)
PT Catalogue 2023
75 pages
Kobalt 7.24 Inch Circular Saw User Manual
No ratings yet
Kobalt 7.24 Inch Circular Saw User Manual
41 pages
Brave Printable Stickers
No ratings yet
Brave Printable Stickers
2 pages
Catalog Wurth MRO
No ratings yet
Catalog Wurth MRO
22 pages
Kioti-Brochure-03 01
No ratings yet
Kioti-Brochure-03 01
6 pages
Madrigal Trucking LLC - Historical DOT Inspection Reports
100% (1)
Madrigal Trucking LLC - Historical DOT Inspection Reports
11 pages
ALE Buyers Guide - Feb 2022
No ratings yet
ALE Buyers Guide - Feb 2022
164 pages
Kendo Tools
No ratings yet
Kendo Tools
16 pages
LN25 Parts Manual 2
No ratings yet
LN25 Parts Manual 2
32 pages
Popular Mechanics Diy Auto Problems Starting Up 02 - 2009
100% (1)
Popular Mechanics Diy Auto Problems Starting Up 02 - 2009
3 pages
BOSCH GSB 550 Professional Impact Drill Instruction Manual
No ratings yet
BOSCH GSB 550 Professional Impact Drill Instruction Manual
26 pages
Hydraulic Cylinders and Lifting Products EN-AU
No ratings yet
Hydraulic Cylinders and Lifting Products EN-AU
58 pages
CRIMSON TRACE-Catalog - LSC PDF
100% (1)
CRIMSON TRACE-Catalog - LSC PDF
27 pages
Truck Type Appendix
No ratings yet
Truck Type Appendix
25 pages
2015.04.10, Manual of Hydraulic System
No ratings yet
2015.04.10, Manual of Hydraulic System
83 pages
CNC Routers Video List 2021 12 A
No ratings yet
CNC Routers Video List 2021 12 A
16 pages
Bodine Catalog
No ratings yet
Bodine Catalog
140 pages
Customer Value Agreements
No ratings yet
Customer Value Agreements
8 pages
Industry Classification Benchmark - Wikipedia, The Free Encyclopedia
No ratings yet
Industry Classification Benchmark - Wikipedia, The Free Encyclopedia
5 pages
994 Cat ODRV4 Maint v1 (+)
No ratings yet
994 Cat ODRV4 Maint v1 (+)
45 pages
Cohbaines Catalogue
100% (1)
Cohbaines Catalogue
111 pages
Sistema de Fuel MCRI
No ratings yet
Sistema de Fuel MCRI
9 pages
Abbrasive Blasting
No ratings yet
Abbrasive Blasting
8 pages
6 in 1 Air Framing Nailer: Set Up and Operating Instructions
No ratings yet
6 in 1 Air Framing Nailer: Set Up and Operating Instructions
13 pages
Power Tools General Catalog
No ratings yet
Power Tools General Catalog
96 pages
PowerTools URYU
No ratings yet
PowerTools URYU
100 pages
CPR1215 30
No ratings yet
CPR1215 30
16 pages
Spare+parts+Documentation+V7 0+
No ratings yet
Spare+parts+Documentation+V7 0+
551 pages
Instructions 11-301
No ratings yet
Instructions 11-301
59 pages
Sodi Kart SR5 Manual
No ratings yet
Sodi Kart SR5 Manual
36 pages
6-DOF Installation Instructions: Package List
No ratings yet
6-DOF Installation Instructions: Package List
15 pages
IAME MY09 Assembly Manual
No ratings yet
IAME MY09 Assembly Manual
45 pages
Instruction Manual: Lock Valve CL-420 CL-500
No ratings yet
Instruction Manual: Lock Valve CL-420 CL-500
10 pages
Astm 183 PDF
No ratings yet
Astm 183 PDF
5 pages
03 PDF
No ratings yet
03 PDF
26 pages
Business Class M2 Workshop Manual-8
No ratings yet
Business Class M2 Workshop Manual-8
289 pages
Charging System
No ratings yet
Charging System
22 pages
JOE EKM Fuel Injector Overhaul WM
No ratings yet
JOE EKM Fuel Injector Overhaul WM
9 pages
Mower Lift Kit and Deck Installation
No ratings yet
Mower Lift Kit and Deck Installation
16 pages
MTD 24A 465A000 Chipper
No ratings yet
MTD 24A 465A000 Chipper
28 pages
Group 2 Tightening Torque: 1. Major Components
No ratings yet
Group 2 Tightening Torque: 1. Major Components
3 pages
Power Steering: Section 6A
No ratings yet
Power Steering: Section 6A
23 pages
User Guide: AM14U4 Chassis Base Kit For The FIRST® Robotics Competition
No ratings yet
User Guide: AM14U4 Chassis Base Kit For The FIRST® Robotics Competition
16 pages
Suspension Delantera
No ratings yet
Suspension Delantera
22 pages
Komatsu Backhoe Loader Wb97s 5 Shop Manual Webm007500
No ratings yet
Komatsu Backhoe Loader Wb97s 5 Shop Manual Webm007500
20 pages
ISUZU SAMMARY pms schedule
No ratings yet
ISUZU SAMMARY pms schedule
3 pages
Parts Manual: MODEL 3000 Rigid Frame Planter
No ratings yet
Parts Manual: MODEL 3000 Rigid Frame Planter
152 pages
Bus Duct / Bus Ways (Metabar & Isobar)
No ratings yet
Bus Duct / Bus Ways (Metabar & Isobar)
32 pages
Safe Erection of Structures Part 2 - Site Management and Procedures.
No ratings yet
Safe Erection of Structures Part 2 - Site Management and Procedures.
20 pages
Skider Giii
86% (7)
Skider Giii
770 pages
Design of Screw: Adama Science and Technology University Department of Mechanical Engineering Fourth Year Section Two
No ratings yet
Design of Screw: Adama Science and Technology University Department of Mechanical Engineering Fourth Year Section Two
10 pages
Komatsu Backhoe Loader Wb146 5 Shop Manual
100% (65)
Komatsu Backhoe Loader Wb146 5 Shop Manual
20 pages
84-01 4.5" XJ Cherokee Lift Kit: Thank You For Choosing Rough Country For Your Suspension Needs
No ratings yet
84-01 4.5" XJ Cherokee Lift Kit: Thank You For Choosing Rough Country For Your Suspension Needs
8 pages

Power Tools

Uploaded by

Power Tools

Uploaded by

POWER TOOLS GENERAL CATALOG

BATTERY OIL-PULSE TOOLS

UBX-AF series UBX-AF500Z / AF600Z / AF700Z

ELECTRIC OIL-PULSE TOOLS

UCX-AF series UCX-AF600L / AF600 / AF700

POWER T OOLS G EN E R A L C ATA L O G 1

Since established in 1915 as the pioneer manufacturer of pneumatic tools in Japan,

URYU has acquired ISO14001 and ISO9001 certifications.

BATTERY OIL-PULSE TOOLS

BOLT & NUT SE T T E R S

SUPER "INTELEC" SYSTEM SERIES 19

OPEN-END / GEARED WRENCHES 38

FASTENING COUNTER WITH POKA-YOKE 46

DRILLS & TAP P ERS

P ERC U SSIO N T O OLS

DRILLS & TAPPERS 67

T ESTERS & AC CESSO RIES

IMPACT CUTTERS / FLUX CHIPPERS 74

TESTERS & ACCESSORIES 77

NOISE & VIBRATION 86

INDEX / URYU NETWORK 96

POWER T OOLS G EN E R A L C ATA L O G 3

1 Model 10 Air Hose Size

3 Torque Range 12 Code

9 Air Inlet Thread (Pipe Tap)

SUPER "INTELEC" SYSTEM CONTROLLER

SUPER "INTELEC" SYSTEM ELECTRIC OIL-PULSE TOOLS

SUPER "INTELEC" SYSTEM AMC・MC TOOLS

UAT・ULT・UL SERIES OIL-PULSE TOOLS

U・UX・UXR SERIES OIL-PULSE TOOLS

OPEN-END WRENCHES・GEARED WRENCHES

FASTENING COUNTER WITH POKA-YOKE

POWER T OOLS G EN E R A L C ATA L O G 5

New design with No springs helps to overcome challenges with

Long Life High Output High-efficiency

Number of Pulse 65 61.5℃

Newly Developed Pulse Unit

Front Plate Rear Plate

Guide pins provided on one side of each driving blade are

High-quality Fastening Accuracy

BOLT & NUT SE T T E R S

The center of gravity is offset from the center of

₂ Before Pulsing ₄ Just after Pulsing

Newly Developed Small Torque & Angle Sensor

POWER T OOLS G EN E R A L C ATA L O G 7

∼±20% UBX-T Series P.13

Electric (all series with Shut-off)

UDP-MC Series P.23

∼±15% UXR-MC Series P.31

(Attention) The torque accuracy in this chart

H-joint When selecting the tool for fastening operation, it is

neccesary to consider bolt size, fastening torque, working

Fastening Time Fastening Time

TORQUE CHART FOR OIL-PULSE WRENCHES

ELECTRIC TOOL ( BATTERY )

BOLT & NUT SE T T E R S

ELECTRIC TOOL ( TRANSDUCERIZED TYPE )

AIR TOOL ( TRANSDUCERIZED TYPE )

●UAMC series（P.30, 31）

TORQUE CHART FOR OIL-PULSE WRENCHES

AIR TOOL ( SHUT-OFF TYPE )

UAT60L UAT60DL UAT60SL UAT60SDL ULT60C ULT60CL

AIR TOOL ( NON SHUT-OFF TYPE )

UL30 UL30S UL30D UL30SD

●U ／ UX ／ UXR series（P.35, 36）

Multifunctional Coordinator with built-in Wireless unit

BOLT & NUT SE T T E R S

UCC-100Z ＵＢＸ-ＡＦ Series

UCC-100Z Series System Layout

Host computer LAN Cable

*2 UBX-AF tools can be paired to 1 UCC-100Z. Sequencer (PLC)

POWER T OOLS G EN E R A L C ATA L O G 11

Newly designed Auto-Relief (PAT.) is not affected by oil degradation.

Upsized LED lamp enables

Pairing parameter is selectable from 3 types;

1. Manual Pairing by dip switches

∼±20% UBX-T Series P.13

UDP-MC Series P.23

∼±15% UXR-MC Series P.31

Specifications (Shut-off Type)

Specifications (Shut-off Type)

Tool UBX-AF UCX-AF UDP-MC UAAMC UAMC UXR-MC