Wireless Endoscope

User Manual
HD WIFI Inspection Camera

Mfr.P/N:Bur3084
 Technical Parameters
Catalogue
Mfr. P/N Bur3084

Model F130
General Safety Information ------------------1
Imaging Sensor CMOS

Camera Resolution 1600X1200

Product Description

Horizontal View Angle 70degrees Packing List ------------------------------2

Transmitting Frequency 2412-2612MHZ Structure Introduction --------------------3
Minimum Illumination 0 LUX
Waterproof part -------------------------3
Power Supply 3.7V 800mah lithium battery

Unobstructed Effective Range 5-10 meter

Operation Instruction

Waterproof Grade IP68(for lens / tube only) Basic Operation ---------------------------4

Diameter of Len 8.0mm Operation On Mobile Phone -------------5
Charging 5V-2A / 1A / 500mA
Operation On Windows Computer -------8
Focal Distance 1.2Inch-3.2Inch
Operation On Mac ------------------------10
Charging Time fully 2 hours

Hard Wire Length 5 meter Important Notices ------------------------10

Technical Parameters ------------------------11

Please read the user manual carefully before using the product.
Operation On Mac OS
If you have any question or concern about the operation of this
endoscope, please contact us at following Email: 1. Connect the endoscope to computer via USB adapter.
[email protected] Note：There is no need to use the wireless tranmitter.

You are suggested to write down the model & the specific scenario and
consult us should you find the endoscope abnormal. 2. To use it on Mac OS, you do not need to install software “ViewPlay Cap”.
Please take photos and record video with Mac’s own software below listed:

General Safety Information Photo Booth

Failure to follow the all instuctions listed below may result in electric shock, Please use the “Quicktime player” to play the video.
fire or serious personal injurey.

1. If immersing camera in water, please install waterproof part avoiding

moisture and store product on dry place. The lens and the tube are Important Notices
water-resistant when the unit is fully assembled, but the wireless
transmitter and light switch is not.
1. Green light will be flashign after turning on the power switch,
2. Never spill liquid of any kind on the wireless transmitter and light switch.
Liquid increase the risk of electrical shock and damage to the product.
2.Charging the device with the power of the 5V, 2A / 1A / 500ma. Red light
3. The unit is not shock-resistant. Do not use it as a hammer and avoid will be on when charging, and goes out when fully charged. It takes 2 hours
high impact result from things such as dropping the unit from height. to be fully charged.

4. Do not use the camera if condensation fogs inside the lens. Let the 3. Featuring IP68 waterproof camera probe and cable allows it to work in
water evaporate before using again. multiple enviroment, but please install waterproof part.

5. Turn off the system if it is not in use. 4. Please note, camera is featured with fixed focus, instead of zoom focus.
Therefore, in order to get the best image quality, the best observation
distance is about 1.2 inch-3.2 inch.

1
 6. Properly dispose of battery. Explosure to high temperatures can cause
B:How to record a video on computer? battery to explode, so do not dispose it into a fire. Attention should be
1: Set the “file” in the PC first. given to the environmental aspects of the battery disposal. Some countries
have regulations concerning battery disposal, please follow all applicable
2: Click the “Capture”at the begin and the end, then the video will be regulations.
saved in the file you have set .
7. Please charge with 5V adapter.
Video path can be set in here

Product Description
Recording Video
This product is a utility class equipment with the function of a real-time
video viewing, video recording and picture capturing which is suitable
for usage in narrow area and the area which can not be observed by
sight such as: vehicle repair, sewer inspection maintenance etc.

Packing List
C.How to convert PC camera to endoscope camera?

Choose the camera

Wireless Transmitter X 1 Endoscope X 1 USB Adapter X 1 Charging Cable X 1 Accessories X 1

Structure Introduction Operation On Windows Computer
① Power 1. Download and install “ViewPlay Cap”software by below link:

WIFI singnal indicator(green) ⑤ ② Endoscope input http://www.51scope.cn/files/setup.rar

Reset ⑥
Battery indicator(red) ④ ③ Charging 2. Instrument Connection
Connect the endoscope to computer via USB adapter.
Note：There is no need to use the wireless tranmitter.

3. Software Operation
Open the ViewPlay Cap and then choose the “integrated Webcam” in
8mm Len the “Device”.
Hard wire
A.How to take photo on computer?

Light switch
Waterproof Part
take photo
waterproof part
4). Taking photos, video recording, viewing pictures and video play back,
Operating Instruction
setting and other operations can be done on the smart client-side.
Basic Operation
1. Long press the power button on wireless transmitter for 5 seconds, the
green indicator on the transmitter will be flashing.
Long press the power button for 2 seconds to power off the transmitter.

2. When the LED lens is used the dark environment, the brightness of
illuminating light can be adjusted by rotating the rotary switch.

⑤ ④ ③ ② ①

①Taking photos: Click on it to take photos and pictures will be saved auto-
Rotary switch
matically in smart mobile device. 3. The flexible tube can be bent into any shape which will be convenient
for entering any zones to check for you.
②Video recording: Click on it to start the video recording and then click
on it again to stop the video recording and save it automatically. 4. Three kinds of attachments (hook,mirror and magnet) can help you to
find out any small objects, such as ring or small screws.
③Folders: Click on it to check the saved pictures or play-back the video.

④Rotate button: Rotate 90 degrees clock wise each time.

⑤Setting：Choose resolution of 640*480，1280*720,1600*1200.

Operation On Mobile Phone
Support mobile phone : Android 4.2 and higher / iOS 7.0 and higher. 2. Instrument Connection
Turn on the wireless transmitter, plug the endoscope into endoscope input.
1.Download and install HD Scope APP
For iPhone/iPad： 3. Wi-Fi Connection
Search for “HD Scope” on App Store, download and install it. 1). Click on the setting icon on main interface of smart mobile device;
Or scan the QR code and choose “iOS” to download HD Scope. 2). Click on the “Wi-Fi/WLAN”， click “HD Scope-XXX” and it will
connect automatically.

Settings

OR
HD scope_146b9c4c7afd
HD Scope QR code

For Android phone：

Search for “HD Scope ”on Google Play Shop, download and install it.
Or scan the QR code and choose“GooglePlay” to download HD Scope.

OR 3). After the connection is successful, click on HD Scope app to view real
time video.

HD Scope QR code