APFC-UNO 3CT

FEATURES
·•3 CT Sensing
•Intelligent Algorithm •which automatically switches
between various capacitive bank
•Upto 12 stage
•Configurable Alarm Settings for Voltage / Current / THD
•ModBus - RTU communication

96 x 96mm

Display Specifications Settable Parameters

Type : 7 Segment LED CT Primary : 5A to 5000A AC (Programmable for any value)

Digits : 3 lines 3 digits to show electrical parameters CT Secondary : 5A AC (Programmable)
Relay Indications : 15 LED for parameter & upto 12 LED for Relay PT Primary : 1OOV to 5OOkV AC (Programmable for any value)
status PT Secondary : 1OOV - 5OOV AC (Programmable for any value)

Input Specifications Output Specifications

Rated Input Voltage : 11 to 3O0V AC (L-N) Output Contacts : NO, One common point Max fuse 6A
50 to 520V AC (L-L) Steps : 1 upto 12 steps
Rated Input Current : Nominal SAAC (Min-11mA, Max 6A) Relay Contact : 5A @ 250V AC (SPST)
Frequency : 45 - 65Hz
Communication
Burden : 8 VA max.
Accuracy : Voltage (L-N / L-L) : ± +_ 0.5% of F.S. Communication Interface : RS485 & Modbus RTU

Current : ± +_ 0.5% of F.S. Auxiliary Supply Specifications

Power Factor : +_ ±1.0% Frequency : ± +_ 0.2%
Input voltage range : 90 - 550VAC
Power (Active, Reactive, Apparent) : +_ 1.0%
Consumption : 15VA max
Energy (Active, Reactive, Apparent) : Class +_ 1.0%
Frequency : 50-60 Hz±
Resolution : For energy : 0.01k, 0.1k, 1k, 0.01M, 0.1M, 1M
(depending Upon CT ratio x PT ratio) Control Specifications

For Power, Voltage, Current : Auto Resolution Target PF : 0.8 lag - 0.8 lead
For Power Factor : 0.001, Harmonics 0.1% Switching program : Auto / Manual
Display scrolling : Automatic / Manual / Default Control Sensitivity : 5% to 100%
Memory Retention : 10 Years (for Energy) Step Time : 1 to 999 sec
Measuring Parameters : Voltage (L-L / L-N) (Individual / Average), Control Mode : Automatic / Manual
Current (Individual / Average), Frequency, Auto initialization : Yes / No
Power Factor (Individual / Total), Active, Reactive
Environmental Specifications
& Apparent Power (Individual / Total), Active,
Reactive & Apparent Energy (Total) Temperature : Operating Temperature : 0°0 to 600C
% THD upto 31st Harmonic for Voltage & : Storage Temperature : -20°0 to 600C
Current / Maximum (Rising) Demand, Humidity : Upto 95% RH without moisture consideration
Auxillary interrupt, Phase Sequence Detection
Mechanical Specifications
Measurement Range
Mounting : Panel Mount
Power Factor : 0.8 lag - 0.8 lead
Size : 96X96mm
Alarm Indications : Over Voltage, Under Voltage, Over Current,
Weight : 350gms (approx)
Under Current, OVER Hz, Under Hz, THD% for Amp
& Voltage Screw Tightening Torque : 0.5 NM

www.nippenco.com
 APFC-UNO 3CT

Mechanical Specifications

96 92 1.4
25.2 26.4

Panel
Front View 96 Cut Out 92 Side View 90.5

Bezel 96 x 96 mm
Depth 54 mm behind bezel

Connection Diagram

UNO-APFC 3CT LED

N PH
+

RS 485 Input : 90-550VAC-LL

: 50/60Hz , 15VA max AUX.SUPPLY
NO Contact : 5A@250VAC ! NO
ALM1 ALM2
K1-K12
6 COM2
TO COM

5 12
4 11
3 I3 10
L3 I2
2 L2 S1 S2 9
I1 S1 S2
1 L1 8
S1 S2
N TO LOAD
COM1
I1 I2 I3 7
L1 L2 L3 N S1 S2 S1 S2 S1 S2

Ordering Information

PRODUCT NAME DESCRIPTIONS

APFC UNO-6R APFC UNO 6 RELAY
APFC UNO-8R APFC UNO 8 RELAY
APFC UNO-12R APFC UNO 12 RELAY
APFC UNO-6R-ENERGY APFC UNO 6 RELAY ENERGY
APFC UNO-8R-ENERGY APFC UNO 8 RELAY ENERGY
APFC UNO-12R-ENERGY APFC UNO 12 RELAY ENERGY
APFC UNO-6R-RS APFC UNO 6 RELAY RS485
APFC UNO-8R-RS APFC UNO 8 RELAY RS485
APFC UNO-12R-RS APFC UNO 12 RELAY Rs485
APFC UNO-6R-ENERGY-RS APFC UNO 6 RELAY ENERGY RS485
APFC UNO-8R-ENERGY-RS APFC UNO 8 RELAY ENERGY RS485
APFC UNO-12R-ENERGY-RS APFC UNO 12 RELAY ENERGY Rs485

6 Relay- 1 Alarm Output Std

8 Relay & 12 Relay- 2 Alarm Output Std

www.nippenco.com