3126E Truck Engine CKM00001-UP(SEBP3273 - 41) - Documentation Page 1 of 4
Shutdown SIS
Previous Screen
Product: TRUCK ENGINE
Model: 3126E TRUCK ENGINE CKM25935
Configuration: 3126E Truck Engine CKM00001-UP
Disassembly and Assembly
3126B and 3126E On-highway Engines
Media Number -RENR1369-15 Publication Date -01/12/2005 Date Updated -09/12/2005
i01982699
Cylinder Head - Install
SMCS - 1100-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-4876 Lubricant 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 27/04/2020
3126E Truck Engine CKM00001-UP(SEBP3273 - 41) - Documentation Page 2 of 4
Illustration 1 g01027450
1. Install a new cylinder head gasket (4).
Illustration 2 g01027447
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 27/04/2020
3126E Truck Engine CKM00001-UP(SEBP3273 - 41) - Documentation Page 3 of 4
2. Attach a suitable lifting device to cylinder head (3). The weight of the cylinder head is
approximately 85 kg (187 lb). Position cylinder head (3) onto the dowels in the cylinder block.
3. Lubricate the cylinder head bolts (1) and (2) and the washers with Tooling (A). Install cylinder
head bolts (1) and (2).
Illustration 3 g00611358
4. Tighten the cylinder head bolts according to the following procedure:
a. Tighten bolt (1) through bolt (14) in a numerical sequence to a torque of 300 ± 15 N·m
(221 ± 11 lb ft).
b. Loosen bolt (1) through bolt (14) until the washers are loose under the bolt heads.
c. Tighten bolt (1) through bolt (14) again in a numerical sequence to a torque of
130 ± 15 N·m (95 ± 11 lb ft).
d. Again tighten bolt (1) through bolt (14) in a numerical sequence to a torque of
130 ± 15 N·m (95 ± 11 lb ft).
e. Turn bolt (1) through bolt (14) in a numerical sequence for an additional 90° (1/4 turn).
f. Tighten bolt (15) through bolt (20) in a numerical sequence to a torque of 55 ± 7 N·m
(41 ± 5 lb ft).
End By:
a. Install the unit injectors. Refer to Disassembly and Assembly, "Unit Injector - Install".
b. Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 27/04/2020
3126E Truck Engine CKM00001-UP(SEBP3273 - 41) - Documentation Page 4 of 4
c. Install the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Install".
Copyright 1993 - 2020 Caterpillar Inc. Mon Apr 27 19:46:47 CDT 2020
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 27/04/2020
