Pt. Amman Mineral Nusa Tenggara Batu Hijau Project Specifcation Fire Extinguiser and Cabinets
Pt. Amman Mineral Nusa Tenggara Batu Hijau Project Specifcation Fire Extinguiser and Cabinets
Page 1 of 4
PROJECT DEVELOPMENT
Version: 4
Approval Date: 02 Nov 2022
DEPARTMENT
Review Cycle: 4 years
Author: Sr. Eng - CSA
AuthorPosID:[Type here]
PRD1514
FIRE EXTINGUISER AND CABINETS
Approval: Chief Engineering
ApprovalPosID: PRD1502
SPECIFCATION
DETAILS OF REVISIONS
TABLE OF CONTENTS
Page
Not Applicable
1.0 GENERAL
1.1 Summary
A. Related Specification
Work in this specification shall be coordinated with Specification SP-AMNT-3-001: General Requirements.
1.2 References
The publications listed below form part of this specification to the extent referenced in this specification. If there is a discrepancy
between the references and the specifications, the specifications shall govern. The list of the references will include international
and local Code. Indonesian code will be used if such a local practice is cost effective. All process buildings shall be designed to U.S.
standards only.
1.3 Submittals
A. Product Data
2.0 PRODUCTS
2.1 Materials
A. Fire Extinguishers
Fire extinguishers shall be Yamato Protect, CHUBB or an approved substitute. Fire extinguishers shall be dry chemical ABC
fire class, 3.5 kilo capacity.
3.0 EXECUTION
3.1 Installation
A. Fire extinguishers shall be installed as shown on the drawings and in accordance with the manufacturer recommendations
(as required).
B. Place fire extinguishers in accordance with the drawings and verify that all equipment is properly functioning. Touch-up all
damaged finishes.
4.0 ATTACHMENTS
Not applicable.
End of Specification