Electromagnetic Flow Meter: DN3-DN3000mm / Flange Connection / Integrated Type
Electromagnetic Flow Meter: DN3-DN3000mm / Flange Connection / Integrated Type
Benefit
Standard Specification
3 3 3
● Flow Unit : L/h, L/m, L/s, m /H, m /m, m /s
● Exciting Current : 125mA, 187mA, 250mA
● Electrode No. :3
● Exciting Frequency : 3.12Hz, 4.16Hz, 6.25Hz
2 measuring electrode
12.5Hz, 25Hz, 30Hz
1 grounding electrode
● Material
External
Nominal
Weight
Diameter
Dimension (mm)
mm L D Kg
3 200 90 4
6 200 90 5
10 200 90 6
15 200 95 8
20 200 105 10
25 200 115 12
32 200 140 13
40 200 150 14
50 200 165 15
65 200 185 18
80 200 200 20
Electrode Liner
Mag1100/Electromagnetic Flow Meter
DN3-DN3000mm / Flange Connection / Integrated Type
Installation Notice
Installed at the lowest point and vertical upward direction Install exhaust valve at the downstream of flow meter
Don’t install at the highest point and vertical downward direction when drop is more than 5m
Installed at the lowest point when used in open drain pipe Need 10D of upstream and 5D of downstream
Don’t install it at the entrance of pump, install it at the exit of pump Installed at the rising direction
Electrode Property
Having strong resistance to HydrochloriC acid of any concentration which is below boiling point.
Hastelloy B Also resistant against vitriol,phosphate,Hydrofluoric acid,organic acid etc,which are Oxidizing
acid,alkali and non oxidizing salt.
Be resistant to oxidizing acid such as Nitric acid,mixed acid as well as oxidizing salt such as
Hastelloy C
Fe+++,Cu++ and sea water
Having strong resistance to corrosive mediums that is similar with glass. Almost applicable in all
Tantalum
chemical mediums.Except for Hydrofluoric acid,Oleum and Alkali.
Platinum-iridium Almost be applicable in all chemical mediums except for aqua fortis,ammonium salt.
Mag1100/Electromagnetic Flow Meter
DN3-DN3000mm / Flange Connection / Integrated Type