Scribd
Upload
210 views

Swissauto 250 - Engine Rebuild Packages

Swissauto is offering two new engine rebuild packages, SP15 and SP45, for its 250 VT1 race engine. SP15 contains parts for a rebuild every 15 running hours and costs €269 plus VAT. SP45 contains more extensive parts for a rebuild every 45 running hours and costs €1,099 plus VAT. Both packages must be installed by an authorized Swissauto dealer and do not include certain wear parts like clutches or filters that require replacement as needed.

Uploaded by

Simon Cooper
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
210 views

Swissauto 250 - Engine Rebuild Packages

Swissauto is offering two new engine rebuild packages, SP15 and SP45, for its 250 VT1 race engine. SP15 contains parts for a rebuild every 15 running hours and costs €269 plus VAT. SP45 contains more extensive parts for a rebuild every 45 running hours and costs €1,099 plus VAT. Both packages must be installed by an authorized Swissauto dealer and do not include certain wear parts like clutches or filters that require replacement as needed.

Uploaded by

Simon Cooper
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Last update 06-2013

ENGINE REBUILD PACKAGES


Based on our latest market research,
research Swissauto decided to offer with immediate effect 2 new rebuild packages:
packages
SP15 & SP45. Both of these kits contain all necessary parts + labor to rebuild a Swissauto 250 VT1 race
engine. The digits behind “SP” correspond with the number of hours when a rebuild shall be accomplished. (ex.
Every 15 running
ing hours, SP15 must be executed.) These complete rebuild sets are indivisible and contain the
following parts:

• SERVICE PACK 15  € 269,-


269, + VAT

Retainer set,, valve springs (B008)


Valve collets set (B010)
Valve spring set (B007)
Valve spring pressure washer set (B009)
Fixing bolt set, bearing hangers (B017)
Clearance shim (4 x B011)
Bearing balancing shaft (2 x F002)
Mounting
unting at an official Swissauto reseller (EU only)

• SERVICE PACK 45  € 1.099,-


1.099, + VAT

Valve lifter (4 x B012)


Retainer set, valve springs (B008)
Valve collets set (B010)
Valve spring set (B007)
Oil seal set , valve
alve stem (B006)
Valve spring pressure washer set (B009)
Fixing bolt set bearing hangers (B017)
Clearance shim (4 x B011)
Valve, IN (2 x B004)
Valve, EX (2 x B005)
Gasket, chain tensioner (B021)
Piston (D001)
Piston rings ( D002)
Gudgion pin (D003)
Clip set, piston (D004)
Gasket, cylinder (C002)
O-ring, cylinder (C003)
Conrod assembly (E002)
Bearing set, crankshaft (E003)
Bearing holder set,, crankshaft (G011)
Oil seal, crankshaft (G007)
Oil seal, crankcase cover (H003)
(H003
Oil valve assembly ( G010)
Oil sieve (G004)
Bearing balancing shaft (2 x F002)
Oil seal assembly, waterpump (I004)
Mounting
ounting at an official Swissauto reseller (EU only)

Parts classified as “wear


wear and teartear” (ex. Clutch parts, the spark-plug,
plug, rubber between carburetor and
cylinder head, air filter, etc.) are not part of the rebuild schedule and shall be replaced when necessary.

Rebuild packages can be ordered and executed by official SWISSAUTO resellerss only!
only
Above listed summary is not limitative; when notice of wear on further parts, also these items must be
checked and replaced in case they are out of tolerance! All extra parts will be taken into account confirm
the normal indicated sales prices
price on the website www.swissauto250.eu
When the engine is being used for endurance racing, the service intervals times are set to 50% of normal!
Example: Engine rebuild must take place after 22,5
2 hours instead of 45 hours.

You might also like