Scribd
Upload
75 views

SMAW1st Summative Testq4

This document contains a practice test for students in Technical-Vocational Livelihood Education (TLE) 8. The test has two sections - a matching section where students must match tools to their definitions, and a multiple choice section testing knowledge of different tools. Some example questions are identifying what type of wrench is used to tighten hoses on an oxy-acetylene unit, what tool is used for loosening and tightening nuts and bolts, and which tool is not a measuring tool. The test covers a range of tools used in welding and metalworking.

Uploaded by

Mark Dexter Mejia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
75 views

SMAW1st Summative Testq4

This document contains a practice test for students in Technical-Vocational Livelihood Education (TLE) 8. The test has two sections - a matching section where students must match tools to their definitions, and a multiple choice section testing knowledge of different tools. Some example questions are identifying what type of wrench is used to tighten hoses on an oxy-acetylene unit, what tool is used for loosening and tightening nuts and bolts, and which tool is not a measuring tool. The test covers a range of tools used in welding and metalworking.

Uploaded by

Mark Dexter Mejia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

1st Summative Test in TLE 8- Q4 1st Summative Test in TLE 8- Q4

SY: 2021-2022 SY: 2021-2022


Name: ________________________________________ Name: ________________________________________
Section: _____________________ Section: _____________________
I.Directions: Match the items in Column A with their meaning in Column B. I.Directions: Match the items in Column A with their meaning in Column B.
Write the letter of your choice on the space provided Write the letter of your choice on the space provided
Column A Column B Column A Column B
____1. Arc A. A tool that can be rolled up and down. ____1. Arc A. A tool that can be rolled up and down.
____2. Width B. It is a one-foot long measuring tool. ____2. Width B. It is a one-foot long measuring tool.
____3. Push-pull rule C. It is the horizontal distance from side to side. ____3. Push-pull rule C. It is the horizontal distance from side to side.
____4. Divider D. A tool used to lay out arcs and circles. ____4. Divider D. A tool used to lay out arcs and circles.
____5. Length E. Used to determine the dimension of an object. ____5. Length E. Used to determine the dimension of an object.
____6. Measuring tool F. It is a measure of vertical distance. ____6. Measuring tool F. It is a measure of vertical distance.
____7. Try square G. It is also called a curved line. ____7. Try square G. It is also called a curved line.
____8. Protractor H. A tool which is divided into 180 equal parts. ____8. Protractor H. A tool which is divided into 180 equal parts.
____9. Height I. It describes how long an object. ____9. Height I. It describes how long an object.
____10. Ruler J. It is a skill that requires measuring ability. ____10. Ruler J. It is a skill that requires measuring ability.
K. A tool used to measure right angles. K. A tool used to measure right angles.

Multiple Choice.Directions: Read each sentence carefully. Choose the letter of the correct answer. Write Multiple Choice.Directions: Read each sentence carefully. Choose the letter of the correct answer. Write
the answer in your SMAW activity notebook. the answer in your SMAW activity notebook.
1. Which type of wrench that is used for tightening hose and fitting connection on oxy-acetylene unit? 1. Which type of wrench that is used for tightening hose and fitting connection on oxy-acetylene unit?
a. Adjustable wrench c. Open-end wrench b. Closed-end wrench d. Oxy acetylene wrench a. Adjustable wrench c. Open-end wrench b. Closed-end wrench d. Oxy acetylene wrench
2. What tool is used for loosening and tightening light and heavy nuts and bolts? 2. What tool is used for loosening and tightening light and heavy nuts and bolts?
a. Hacksaw c. Screw driver b. Hammer d. Wrench a. Hacksaw c. Screw driver b. Hammer d. Wrench
3. What type of measuring tool that is made of tampered steel about 1/8-inch-thick and ¾ inch wide 3. What type of measuring tool that is made of tampered steel about 1/8-inch-thick and ¾ inch wide
and 6to 12 inches long? and 6to 12 inches long?
a. Pull-push rule c. Steel tape b. Steel rule d. Try square a. Pull-push rule c. Steel tape b. Steel rule d. Try square
4. What tool that has a wedge-shaped and used to shear, cut, and chip metal? 4. What tool that has a wedge-shaped and used to shear, cut, and chip metal?
a. Cold chisel c. Punches b. Hammer d. Scraper a. Cold chisel c. Punches b. Hammer d. Scraper
5. Which of the following tools does not belong to measuring tools? 5. Which of the following tools does not belong to measuring tools?
a. Clamps c. Micrometer caliper b. Combination square d. Steel rule a. Clamps c. Micrometer caliper b. Combination square d. Steel rule
6. What kind of hand tool that is designed to turn screws? 6. What kind of hand tool that is designed to turn screws?
a. Center punch c. Screwdriver b. Hammers d. Try square a. Center punch c. Screwdriver b. Hammers d. Try square
7. What type of file that is used for enlarging holes? 7. What type of file that is used for enlarging holes?
a. Flat file c. Round file b. Mill file d. Square file a. Flat file c. Round file b. Mill file d. Square file
8. What kind of cutting tool that has a solid and adjustable frame? It is used in cutting metals but of 8. What kind of cutting tool that has a solid and adjustable frame? It is used in cutting metals but of
minimal thickness, width, and length. minimal thickness, width, and length.
a. Combination square c. Micrometer caliper b. Hacksaw d. Scraper a. Combination square c. Micrometer caliper b. Hacksaw d. Scraper
9. Which of the following tools does not belong to holding tools? 9. Which of the following tools does not belong to holding tools?
a. Clamps c. Tong b. Pliers d. Try square a. Clamps c. Tong b. Pliers d. Try square
10. What kind of tool that is used for measuring or setting of distances, and to lay out arcs and circles? 10. What kind of tool that is used for measuring or setting of distances, and to lay out arcs and circles?
a. Dividers c. Helical- Ratchet b. Files d. Philips a. Dividers c. Helical- Ratchet b. Files d. Philips

You might also like