Scribd
Upload
155 views

Boost Converter - MATLAB & Simulink

A boost converter is a DC/DC power converter that steps up voltage from its input to its output. This example shows a boost converter with a 24V source feeding an RC load, using pulse-width modulation at 20kHz to produce an output voltage of approximately 48V, as predicted by the theoretical transfer function.

Uploaded by

october87
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
155 views

Boost Converter - MATLAB & Simulink

A boost converter is a DC/DC power converter that steps up voltage from its input to its output. This example shows a boost converter with a 24V source feeding an RC load, using pulse-width modulation at 20kHz to produce an output voltage of approximately 48V, as predicted by the theoretical transfer function.

Uploaded by

october87
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Boost Converter

This example shows the operation of a boost converter.


Copy Command  

Description
A boost converter is a DC/DC power converter which steps up voltage from its input (source) to its output (load). In continuous
conduction mode (current through the inductor never falls to zero), the theoretical transfer function of the boost converter is:

where is the duty cycle.

In this example, the converter is feeding an RC load from a 24 V source and the PWM frequency is set to 20 kHz.

Simulation
Run the simulation and observe waveforms on Scope. Verify that the mean value of the load voltage (Vout) is very close to the
theoretical value of: Vout = 24 / (1 - 0.5) = 48 V.

You might also like