Scribd
Upload
47 views

Release Note - English

This firmware release note provides information on firmware version 2.00.02.34, 2.00.60.38, and 2.00.60.52 for several Samsung printer models. The updates include fixes for issues such as missing menu options, network security problems, print quality defects, and errors occurring when specific file types are printed. Instructions are provided for updating the firmware using a USB cable or over the network. The updates are tested for compatibility with Samsung toner cartridges only.

Uploaded by

Roberto Bernardi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views

Release Note - English

This firmware release note provides information on firmware version 2.00.02.34, 2.00.60.38, and 2.00.60.52 for several Samsung printer models. The updates include fixes for issues such as missing menu options, network security problems, print quality defects, and errors occurring when specific file types are printed. Instructions are provided for updating the firmware using a USB cable or over the network. The updates are tested for compatibility with Samsung toner cartridges only.

Uploaded by

Roberto Bernardi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Firmware Release Note

Model : ML-5510N, 5510ND, 5512ND,6510ND, 6512ND Date : March 21, 2016

Version Category Change Description

Add Func. Add the error code (M3-1112, Jam Inside of Machine)
V2.00.02.34
(27-Nov, 2014)
Fix Defect Few options are missing or added extra to the printed Menu map.

Control Panel Lock Feature is hanging when enble Control Panel Lock option

Fix the newwork security issues

Wireless key setting dose not work peorerly if user input special chat such as(<,>,&,")

V2.00.60.38
Fix Defect Tray confirm message is disappeared after machine wakes up from power save
(8-Dec, 2014)
in Network configuration report SMTP sever is displayed as 0.0.0.0.25

System crashes and reboots when PCI Wireless card is installed in the machine

Fix the print quality problem

Add Func. Add Authentication Menu on SyncThru Web Service


V2.00.60.48
[Job Accounting] Device didn't send  a reponse to SyncThru Web Admin Service
(4-Mar, 2015)
Fix Defect
XOA Web Issues

Add Func. Feature Support for SPDS Android App

Fix Russia summer time issue

Fix the printing issue on Unix system(printer hang issue when test prn file is fired)
V2.00.60.52
(21th-Mar, 2016) Wrong permission is set for community name in SyncThru Web Service
Fix Defect
when it is Set through Fleet admin pro.

Fix the Fuser Motor Failure error

Fix PCL5 printing error(Image decoding error is occurred in specific size)

※ Note
- Please do not turn off the printer and your computer until firmware update finishes.
- If you are using USB connection, disconnect all other USB printers from the PC.
- The firmware update you are about to install has been tested for compatibility
with Samsung toner cartridge products ONLY.
Installing The upgrade may cause a non-Samsung toner cartridge to malfunction.
- Do not run your printer during the firmware update.(Do not have any print job)
How to update the firmware using a USB cable.
1. Make sure that the machine is connected to the PC with a USB cable.
2. Drag the firmware file(*.hd) and Drop down it on usblist2.exe.
And then, firmware update will be started automatically.

3. The firmware update will start.


Once the firmware update is complete, the machine will be rebooted automatically.

Updating from the Network


1. Go to the SyncThruWeb Service (SWS) main home page.
Login as Admin in SyncThruWeb Service.
NOTE: Login using the Administrator ID and Password established
during initial machine setup.
2. Click [Maintenance] on the top menu.
And then click [Firmware Upgrade] or Application Management > Application
3. Click Add button
4. Click [Browse]. Choose installation file by browsing file system. And click OK button
5. The uploading step will start. After this step, next step will be started automatically.
6. The firmware update will start.
7. Once the f/w update is complete, the machine power-off and power-on automatically.

You might also like