Scribd
Upload
38 views

Coordinate Measuring System

This document summarizes the manufacturing equipment available at a facility, including: - A coordinate measuring system and CAD software for inspection and reverse engineering. - Several computer-aided design (CAD) stations and CNC programming software. - Various CNC milling machines, lathes, grinders, and presses with capacities up to 1200 tons. - Additional fabrication equipment such as welders, shears, and a press brake. - Service equipment like overhead cranes and forklifts for production and material handling.

Uploaded by

digpal zala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views

Coordinate Measuring System

This document summarizes the manufacturing equipment available at a facility, including: - A coordinate measuring system and CAD software for inspection and reverse engineering. - Several computer-aided design (CAD) stations and CNC programming software. - Various CNC milling machines, lathes, grinders, and presses with capacities up to 1200 tons. - Additional fabrication equipment such as welders, shears, and a press brake. - Service equipment like overhead cranes and forklifts for production and material handling.

Uploaded by

digpal zala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

COORDINATE MEASURING SYSTEM

•Giddings & Lewis Cordax Apollo II Model RS-50 DCC High Performance Coordinate Measuring
System Measuring envelope 40" x 48" x 30" tall. Equipped with G&L "Direct Inspect" inspection
software and "Direct Design", reverse engineering software.

COMPUTER AIDED DESIGN SYSTEM


•Three stations Solid Works 2015
•Complete 3D Modeling capability –Full translation capability with most software

CNC PROGRAMMING
•2 Seats of Mastercam2017

WIRE E.D.M.
•Pratt and Whitney model W1 five axis (independent U and V axis) Maximum work piece 13.8"
x 17.7” x 10" -electronic Z axis.—Max work piece weight 600lbs

 Sodick Model AQ535L (independent U and V axis) Maximum travels: X=21.6”, Y=13.7”,
Z=11.8”. Maximum weight of work piece: 1496lbs.

MILLING MACHINES
•All CNC machining centers are 3D capable

•OKK VM-5 X40”x Y20”x Z20”-20 station tool changer

•OKK VM-7 vertical machining center X60” x Y30” x Z24”with 20 station tool changer

•Topwell CNC vertical milling machine, X50" x Y20" x Z24"

•Cincinnati Hydrotel, 120" x 28" x 14", maximum work height 32" with Sony 3 axis readout.

•DeVlieg 3H-48, with automatic positioning, capacity 48" right to left, 36" vertical.

•Manual milling machines (5 units), capacity 12" x 48", with readout.

LATHES
•Monarch, 24" swing x 102" centers.

•Clausing lathe 12" swing with readouts

•Hardinge super precision HLV-H, 11" swing with readouts

•HAAS SL-10T CNC Lathe, 16.25” swing

•HAAS SL-30 CNC Lathe, 29’’ swing


GRINDERS
•Mattison, high powered surface grinder, capacity 36" x 120" x 36" high.

•Mattison, high powered surface grinder, capacity 16" x 48" length x 16" high.

•Clausing 12-24 surface grinder, capacity 12" x 24".

•Brown & Sharp, 6" x 18" micromaster surface grinder.

•Chevalier 6" x 18" surface grinder.

PRESSES
•Hamilton 1200Ton, 4 point -Single action, 72" x 108" ram and bolster -18" stroke -30" ram
adjustment -Complete with air cushions.

•Hamilton 900Ton TS-1249, 88" x 124" ram and bolster -24" stroke -60" maximum shut height

•Verson300Ton, 2 point -single action -96” X 60” ram & bolster -14” stroke -12” ram adjustment

•Clearing 250Ton straight side -72" x 42" ram -30" maximum shut height.

•Minster 60Ton OBI.

•Niagara, 35Ton OBI, 120 strokes per minute, 10 1/4" maximum shut height.

•Servo feeds and coil lines up to 20,000 lbs

FABRICATION EQUIPMENT
•MIG, TIG and Arc Welding.

•Cincinnati, 1/4" x 10 foot mechanical gap shear.

•Cincinnati, 10 foot press brake.

•Hypertherm MAX 43 plasma cutter, 1/2" capacity.

SERVICE AND TRANSPORT EQUIPMENT


•5 and 10 ton overhead bridge cranes servicing production and machining bays.

•Forklift capacity up to 40,000 lbs.

You might also like