3M Ultra S800 - Sepc
3M Ultra S800 - Sepc
Performance Testing
Film
Method Glass Substrate Rating
Attachment
Safety Glazing
16 CFR 1201 Category 2, 400 ft-lbs
¼” & 1/8” annealed --
ANSI Z97.1 Class A (Unlimited), 400 ft-lbs
Impact Resistance
ASTMs E1886 / E1996 ¼” tempered Missile Level A, +/- 75 psf
IPA
ASTM E330 3/16” tempered +/- 100 psf
Blast Mitigation Blast Load Rating
IPA 9 psi, 60 psi*msec GSA Level 2 / ASTM “Minimal Hazard”
¼” annealed
IPP 7 psi, 42 psi*msec GSA Level 2 / ASTM “Minimal Hazard”
GSA TS01-2003 / IPA 9 psi, 60 psi*msec GSA Level 2 / ASTM “No Hazard”
¼” tempered
ASTM F1642 IPP 7 psi, 42 psi*msec GSA Level 2 / ASTM “Minimal Hazard”
IPA 10 psi, 80 psi*msec GSA Level 2 / ASTM “No Hazard”
1” double pane (annealed)
IPP 9 psi, 60 psi*msec GSA Level 2 / ASTM “Minimal Hazard”
*Glazing systems vary. Contact 3M for more information.
IMPORTANT NOTICE:
This product is not approved in the State of Florida for use as hurricane, windstorm, or impact protection from wind-borne debris from a hurricane or
windstorm. In compliance with Florida Statute 553.842, this product may not be advertised, sold, offered, provided, distributed, or marketed in the State of
Florida as hurricane, windstorm, or impact protection from wind-borne debris from a hurricane or windstorm.
The information provided in this report is believed to be reliable; however, due to the wide variety of intervening factors, 3M does not warrant that the
results will necessarily be obtained. All details concerning product specifications and terms of sale are available from 3M
1 /2
3M™ Scotchshield™ Safety & Security Window Film Technical Data Sheet
Revision A, April 2019
Ultra S800
Technical Information
Technical information and data, recommendations, and other statements provided by 3M are based on
information, tests, or experience which 3M believes to be reliable, but the accuracy or completeness of such
information is not guaranteed. Such technical information and data are intended for persons with knowledge
and technical skills sufficient to assess and apply their own informed judgment to the information. The typical
values shown should not be used for the purpose of specification limits. If you have questions about this
Product, contact the Customer Service Department at 18008529722.
Product Use
Many factors beyond 3M's control and uniquely within user's knowledge and control can affect the use and
performance of a 3M product in a particular application. Given the variety of factors that can affect the use
and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining
whether it is fit for a particular purpose and suitable for user's method of application.
Warranty
3M warrants that each 3M product will be free from defects in material and manufacture for the length of the
product warranty. 3M MAKES NO OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Limited Remedy
If a 3M product does not conform to this warranty, the sole and exclusive remedy is, at 3M's option,
replacement of the 3M product or refund of the purchase price.
No Extension of Warranty
In the case of an approved warranty claim, the replacement Product will carry only the remaining term of the
original warranty period.
Limitation of Liability
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted.
IMPORTANT NOTICE:
This product is not approved in the State of Florida for use as hurricane, windstorm, or impact protection from wind-borne debris from a hurricane or
windstorm. In compliance with Florida Statute 553.842, this product may not be advertised, sold, offered, provided, distributed, or marketed in the State of
Florida as hurricane, windstorm, or impact protection from wind-borne debris from a hurricane or windstorm.
The information provided in this report is believed to be reliable; however, due to the wide variety of intervening factors, 3M does not warrant that the
results will necessarily be obtained. All details concerning product specifications and terms of sale are available from 3M
2 /2