Configuration guide

HPE COMPLETE BOM GUIDELINES:

COMMVAULT HYPERSCALE X

CONTENTS
HPE Apollo 4200 Gen10 for Commvault HyperScale X ................................................................................................................................................................................................................... 2
Baseline components ................................................................................................................................................................................................................................................................................................... 2
Flex component guidelines .................................................................................................................................................................................................................................................................................... 3
HPE ProLiant DL380 Gen10 for Commvault HyperScale X ......................................................................................................................................................................................................... 4
Baseline components ................................................................................................................................................................................................................................................................................................... 4
Flex component guidelines .................................................................................................................................................................................................................................................................................... 5
HPE ProLiant DL360 Gen10 for Commvault HyperScale X ......................................................................................................................................................................................................... 6
Baseline components ................................................................................................................................................................................................................................................................................................... 6
Flex component guidelines .................................................................................................................................................................................................................................................................................... 7
Configuration guide Page 2

HPE APOLLO 4200 GEN10 FOR COMMVAULT HYPERSCALE X

Baseline components
The components below are required in all configurations. HPE Apollo 4200 Gen10 for Commvault HyperScale X™ nodes require 24 data
drives are configured per node. Commvault licensing is per node for HyperScale X configurations. Initial HyperScale X deployments must a
minimum of 3 nodes. Single node increments are allowed to be added beyond 3.

TABLE 1. Baseline components—HPE Apollo 4200 Gen10 for Commvault HyperScale X

Quantity Part number Description Flex component Notes

1 P07244-B21 HPE Apollo 4200 Gen10 24LFF Configure-to-order Server

1 P07907-L21 Intel® Xeon® Silver 4216 (2.1GHz/16-core/100W) FIO Processor Kit
1 P07907-B21 Intel Xeon Silver 4216 (2.1GHz/16-core/100W) Processor Kit
16 P00924-K21 HPE 32GB (1x32GB) Dual Rank x4 DDR4-2933 CAS-21-21-21 Registered
Smart Memory Kit
1 869083-B21 HPE Smart Array P816i-a SR Gen10 (16 Internal Lanes/4GB Cache/SmartCache)
12G SAS Modular LH Controller
1 P01367-B21 HPE 96W Smart Storage Battery (up to 20 Devices) with 260mm Cable Kit
2 * Networking  Refer to Table 2
1 830824-B21 HPE Smart Array P408i-p SR Gen10 12G SAS PCIe Plug-in Controller
1 P14010-B21 HPE Apollo 4200 Gen10 6SFF SAS/SATA Rear Drive Cage Kit
1 P09656-B21 HPE Smart Array E/P SR FIO Controller Mode for Rear Storage
* * Boot Drives  Refer to Table 2
* * Metadata Drives  Refer to Table 2
24 * Data Storage Options  Refer to Table 2
* * Optional I/O  Refer to Table 2
* * Transceivers and Network Cables  Refer to Table 2
2 830272-B21 HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
1 * Rail Kit  Refer to Table 2
1 BD505A HPE iLO Advanced 1-server License with 3yr Support on HPE iLO Licensed Features
* * HPE Support  Refer to Table 2
* * Commvault HyperScale X node license  Refer to Table 2

* Refer to Table 2 HPE Apollo 4200 Gen10 for Commvault HyperScale X Flex components
Configuration guide Page 3

Flex component guidelines

The guidelines below must be satisfied for each component category.
TABLE 2. HPE Apollo 4200 Gen10 for Commvault HyperScale X Flex components
Flex component Guidelines

Boot drives Required. Quantity 2. Select one of the supported drives below:
Quantity Part number Description
2 P18432-K21 HPE 480GB SATA 6G Mixed Use SFF SC 3yr Wty Multi Vendor SSD
2 P47323-K21 HPE 480GB SATA 6G Mixed Use SFF SC S4620 SSD
Metadata drives Required. Quantity one 6.4 TB and quantity one 3.2 TB or 3.84 TB drive must be configured.
Configure quantity one 6.4 TB SSD from the below list of supported drives:
Quantity Part number Description
1 P49056-K21 HPE 6.4TB SAS Mixed Use SFF SC MV SSD
Configure quantity one 3.2 TB or 3.84 TB drives from the below list of supported drives. Drives are listed in order of preference:
Quantity Part number Description
1 P49052-K21 HPE 3.2TB SAS Mixed Use SFF SC MV SSD
1 P37017-K21 HPE 3.84TB SAS 12G Mixed Use SFF SC Value SAS MV SSD
1 P18438-K21 HPE 3.84TB SATA 6G Mixed Use SFF SC MV SSD
Networking Required. Must configure a minimum of 2 adapters. Supported adapters are listed below:
Quantity Part number Description
2 817753-B21 HPE 10/25GbE 2p SFP28 MCX4121A Adapter
2 813661-B21 HPE 10GbE 2p BASE-T BCM57416 Adapter
2 817718-B21 HPE 10/25GbE 2p SFP28 BCM57414 Adapter
Data Storage Required. Quantity 24 must be configured. One of the below supported data storage options must be included. Mixing data drive capacities within a
Options node is not supported.
Quantity Part number Description
24 834031-K21 HPE 8TB SAS 7.2K LFF LP 512e MV HDD
24 P09149-K21 HPE 10TB SAS 7.2K LFF LP He 512e HDD
24 881781-K21 HPE 12TB SAS 7.2K LFF LP He 512e MV HDD
24 P09155-K21 HPE 14TB SAS 7.2K LFF LP He 512e MV HDD
24 P23608-K21 HPE 16TB SAS 7.2K LFF LP ISE MV HDD
24 P37669-K21 HPE 18TB SAS 7.2K LFF LP ISE MV HDD
Optional I/O The Optional I/O add-on cards below are supported.
Part number Description
817753-B21 HPE 10/25GbE 2p SFP28 MCX4121A Adapter
813661-B21 HPE 10GbE 2p BASE-T BCM57416 Adapter
817718-B21 HPE 10/25GbE 2p SFP28 BCM57414 Adapter
P9M76A HPE SN1600Q 32Gb Dual Port FC Adapter
Q0L12A HPE SN1600E 32Gb Dual Port FC Adapter
P9D94A HPE SN1100Q 16Gb Dual Port FC HBA
Q0L14A HPE SN1200E 16Gb Dual Port FC HBA
Note: Two PCIe slots are available for Optional I/O when the Recommended Boot/Metadata configuration is used.
Note: One PCIe slot is available for Optional I/O when the Optional Boot/Metadata configuration is used.
Transceivers and A minimum of four 10 Gb or higher speed network connections per HyperScale server are required. Transceivers and network cables are required for
Network Cables these server-to-network switch connections. The type and quantity of transceivers and cables required is dependent on planned implementation
speed (10 Gb/25 Gb), switch type and medium type (copper or optical). For more information refer to the HPE Ethernet 10/25Gb Adapters QuickSpecs
and the HPE Ethernet Transceivers and Cables QuickSpecs.
Rail Kit Any HPE rail kit supported with server platform.
HPE Support HPE Support is required.
Configuration guide Page 4

TABLE 2. HPE Apollo 4200 Gen10 for Commvault HyperScale X Flex components (continued)
Flex component Guidelines

Commvault A Commvault HyperScale X 24-drive node subscription E-LTU or perpetual E-LTU must be included with each node. If perpetual E-LTU is selected,
HyperScale X then a minimum quantity of 12 Commvault HyperScale X 24-drive Node per Node 1-month Maintenance is required.
node license Commvault HyperScale X 24-drive node E-LTUs
R7K56AAE Commvault HyperScale X 24-drive Node per Node Perpetual E-LTU
R7K58AAE Commvault HyperScale X 24-drive Node per Node 1-year Subscription E-LTU
R7K59AAE Commvault HyperScale X 24-drive Node per Node 2-year Subscription E-LTU
R7K60AAE Commvault HyperScale X 24-drive Node per Node 3-year Subscription E-LTU
R7K61AAE Commvault HyperScale X 24-drive Node per Node 4-year Subscription E-LTU
R7K62AAE Commvault HyperScale X 24-drive Node per Node 5-year Subscription E-LTU
Commvault HyperScale X 24-drive Node Maintenance SKUs
R7K57AAE Commvault HyperScale X 24-drive Node per Node 1-month Maintenance

HPE PROLIANT DL380 GEN10 FOR COMMVAULT HYPERSCALE X

Baseline components
The components below are required in all configurations. HPE ProLiant DL380 Gen10 for Commvault HyperScale X nodes require 12 data
drives are configured per node. Commvault licensing is per node for HyperScale X configurations. Initial HyperScale X deployments must a
minimum of 3 nodes. Single node increments are allowed to be added beyond 3.
TABLE 3. HPE ProLiant DL380 Gen10 Baseline components for Commvault HyperScale X
Quantity Part number Description Flex component Notes

1 P19718-B21 HPE DL380 Gen10 12LFF NC CTO Server

1 P02495-L21 Intel Xeon Silver 4216 (2.1GHz/16-core/100W) FIO Processor Kit
1 P02495-B21 Intel Xeon Silver 4216 (2.1GHz/16-core/100W) Processor Kit
16 P00924-B21 HPE 32GB Dual Rank x4 DDR-2933 CAS-21-21-21 Registered Smart Memory Kit
1 P01366-B21 HPE 96W Smart Storage Battery (up to 20 Devices/145mm Cable) Kit
1 804338-B21 HPE Smart Array P816i-a SR Gen10 (16 Internal Lanes/4GB Cache/SmartCache) 12G
SAS Modular Controller
2 * Networking  Refer to Table 4
1 826687-B21 HPE DL38X Gen10 2SFF Premium HDD Front NVMe or Front/Rear SAS/SATA Kit
* * Boot Drives  Refer to Table 4
* * Metadata Drives  Refer to Table 4
12 * Data Storage Options  Refer to Table 4
* * Optional I/O  Refer to Table 4
* * Transceivers and Network Cables  Refer to Table 4
2 * Power Supply  Refer to Table 4
1 BD505A HPE iLO Advanced 1-server License with 3yr Support on HPE iLO Licensed Features
1 * Rail Kit  Refer to Table 4
* * HPE Support  Refer to Table 4
* * Commvault HyperScale X node license  Refer to Table 4

* Refer to Table 4 HPE ProLiant DL380 Gen10 for Commvault HyperScale X Flex component
Configuration guide Page 5

Flex component guidelines

The guidelines below must be satisfied for each component category.
TABLE 4. HPE ProLiant DL380 Gen10 for Commvault HyperScale X Flex component
Flex component Guidelines

Networking Required. Must configure a minimum of 2 adapters, one FlexLOM adapter and one PCIe adapter.
Configure one of the supported FlexLOM adapters listed below:
Quantity Part number Description
1 817749-B21 HPE 10/25GbE 2p FLR-SFP28 MCX4121A Adapter
1 817709-B21 HPE 10/25GbE 2p FLR-SFP28 BCM57414 Adapter
1 817721-B21 HPE 10GbE 2p FLR-T BCM57416 Adapter
1 P08440-B21 HPE 10GbE 2p FLR-SFP+ BCM57414 Adapter
Configure minimum 1 of the PCIe Network adapters listed below:
1 817753-B21 HPE 10/25GbE 2p SFP28 MCX4121A Adapter
1 813661-B21 HPE 10GbE 2p BASE-T BCM57416 Adapter
1 817718-B21 HPE 10/25GbE 2p SFP28 BCM57414 Adapter
1 P08421-B21 HPE 10GbE 2p SFP+ BCM57414 Adapter

Note: Additional PCIe network adapters can be configured in any open PCIe slot.
Boot drives Required. Must be quantity 2. The drives below are supported for boot drives:
Quantity Part number Description
2 P18432-B21 HPE 480GB SATA 6G Mixed Use SFF SC Multi Vendor SSD
2 P47323-B21 HPE 480GB SATA 6G Mixed Use SFF SC S4620 SSD
Metadata drives Required. Must configure two 3.2 TB or larger Mixed Use SSDs. Configure either option A or option B below, not both.
Option A: Configure all the following:
Quantity Part number Description
1 870548-B21 HPE DL Gen10 x8/x16/x8 Riser Kit
2 P26936-B21 HPE 3.2TB NVMe MU HH PM1735 SSD
Option B: Configure all the following:
Quantity Part number Description
1 826688-B21 HPE DL38X Gen10 2SFF HDD Riser Kit
And for option B configure one of the below:
Quantity Part number Description
1 870549-B21 HPE DL38X Gen10 12Gb SAS Expander
1 830824-B21 HPE Smart Array P408i-p SR Gen10 Ctrlr
1 804394-B21 HPE Smart Array E208i-p SR Gen10 Ctrlr
And for option B configure quantity 2 of one of the following SSDs:
Quantity Part number Description
2 P37017-B21 HPE 3.84TB SAS MU SFF SC VS MV SSD
2 P18438-B21 HPE 3.84TB SATA MU SFF SC MV SSD
Data Storage Required. Quantity 12 must be configured. One of the below supported data storage options must be included. Mixing data drive capacities within a
Options node is not supported.
Quantity Part number Description
12 819201-B21 HPE 8TB SAS 7.2K LFF SC 512e MV HDD
12 857644-B21 HPE 10TB SAS 7.2K LFF SC He 512e MV HDD
12 881779-B21 HPE 12TB SAS 7.2K LFF SC He 512e MV HDD
12 P09153-B21 HPE 14TB SAS 7.2K LFF SC He 512e MV HDD
12 P23863-B21 HPE 16TB SAS 7.2K LFF SC ISE MV HDD
12 P37664-B21 HPE 18TB SAS 7.2K LFF SC ISE MV HDD
Optional I/O The Optional I/O add-on cards below are supported.
Part number Description
817753-B21 HPE 10/25GbE 2p SFP28 MCX4121A Adapter
813661-B21 HPE 10GbE 2p BASE-T BCM57416 Adapter
817718-B21 HPE 10/25GbE 2p SFP28 BCM57414 Adapter
P08421-B21 HPE 10GbE 2p SFP+ BCM57414 Adapter
P9D94A HPE SN1100Q 16Gb Dual Port Fibre Channel Host Bus Adapter
Q0L14A HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter
P9M76A HPE SN1600Q 32Gb Dual Port FC Adapter
Q0L12A HPE SN1600E 32Gb Dual Port FC Adapter
Configuration guide Page 6

TABLE 4. HPE ProLiant DL380 Gen10 for Commvault HyperScale X Flex component (continued)
Flex component Guidelines

Transceivers and A minimum of four 10 Gb or higher speed network connections per HyperScale server are required. Transceivers and network cables are required for
Network Cables these server-to-network switch connections. The type and quantity of transceivers and cables required is dependent on planned implementation
speed (10 Gb/25 Gb), switch type and medium type (copper or optical). For more information refer to the HPE Ethernet 10/25Gb Adapters QuickSpecs
and the HPE Ethernet Transceivers and Cables QuickSpecs.
Power Supply Dual Power Supplies recommended. Any HPE power supply supported with server platform. Refer to the HPE Power Advisor for wattage
requirements.
Rail Kit Any HPE rail kit supported with server platform.
HPE Support HPE Support is required.
Commvault A Commvault HyperScale X 12-drive node subscription E-LTU or perpetual E-LTU must be included with each node. If perpetual E-LTU is selected,
HyperScale X then a minimum quantity of 12 Commvault HyperScale X 12-drive Node per Node 1-month Maintenance is required.
node license Commvault HyperScale X 12-drive node E-LTUs
R7K49AAE Commvault HyperScale X 12-drive Node per Node Perpetual E-LTU
R7K51AAE Commvault HyperScale X 12-drive Node per Node 1-year Subscription E-LTU
R7K52AAE Commvault HyperScale X 12-drive Node per Node 2-year Subscription E-LTU
R7K53AAE Commvault HyperScale X 12-drive Node per Node 3-year Subscription E-LTU
R7K54AAE Commvault HyperScale X 12-drive Node per Node 4-year Subscription E-LTU
R7K55AAE Commvault HyperScale X 12-drive Node per Node 5-year Subscription E-LTU
Commvault HyperScale X 12-drive Node Maintenance SKUs
R7K50AAE Commvault HyperScale X 12-drive Node per Node 1-month Maintenance

HPE PROLIANT DL360 GEN10 FOR COMMVAULT HYPERSCALE X

Baseline components
The components below are required in all configurations. HPE ProLiant DL360 Gen10 for Commvault HyperScale X nodes require 4 data
drives configured per node. Commvault licensing is per node for HyperScale X configurations. Initial HyperScale X deployments must a
minimum of 3 nodes. Single node increments are allowed to be added beyond 3.
TABLE 5. HPE ProLiant DL360 Gen10 Baseline Components for Commvault HyperScale X
Quantity Part number Description Flex component Notes

1 867958-B21 HPE ProLiant DL360 Gen10 4LFF Configure-to-order Server

1 P02571-L21 Intel Xeon Silver 4208 (2.1GHz/8-core/85W) FIO Processor Kit
1 P02571-B21 Intel Xeon Silver 4208 (2.1GHz/8-core/85W) Processor Kit
8 P00924-B21 HPE 32GB 2Rx4 DDR-2933 CAS-21-21-21 Registered Smart Memory Kit
1 867972-B21 HPE DL360 Gen10 1SFF Rear SAS/SATA/UFF Backplane Kit
1 867982-B21 HPE DL360 Gen10 Low Profile Riser Kit
1 P01366-B21 HPE 96W Smart Storage Battery with 145mm Cable Kit
1 804338-B21 HPE Smart Array P816i-a SR Gen10 12G SAS Modular Controller
1 873869-B21 HPE DL360 Gen10 LFF Internal Cable Kit
* * Networking  Refer to Table 6
1 P26936-B21 HPE 3.2TB NVMe MU HH PM1735 SSD
1 * Boot Drive  Refer to Table 6
4 * Data Storage Drives  Refer to Table 6
2 * Power Supply  Refer to Table 6
1 * Optional I/O  Refer to Table 6
1 * Rail Kit  Refer to Table 6
1 BD505A HPE iLO Adv 1-svr Lic 3yr Support
* * HPE Support  Refer to Table 6
* * Commvault HyperScale X node license  Refer to Table 6

* Refer to Table 6 HPE ProLiant DL360 Gen10 for Commvault HyperScale X Flex component
Configuration guide Page 7

Flex component guidelines

The guidelines below must be satisfied for each component category.
TABLE 6. HPE ProLiant DL360 Gen10 for Commvault HyperScale X Flex component
Flex component Guidelines

Networking Required. Must configure one FlexLOM adapter. Supported adapters are listed below:
Quantity Part number Description
1 817709-B21 HPE 10/25GbE 2p FLR-SFP28 BCM57414 Adptr
1 817749-B21 HPE 10/25GbE 2p FLR-SFP28 MCX4121A Adptr
1 817721-B21 HPE 10GbE 2p FLR-T BCM57416 Adptr
1 P08440-B21 HPE 10GbE 2p FLR-SFP+ BCM57414 Adptr
Boot drives Required. Configure one of the below supported drives.
Quantity Part number Description
1 P18432-B21 HPE 480GB SATA 6G Mixed Use SFF SC MV SSD
1 P47323-B21 HPE 480GB SATA 6G Mixed Use SFF SC S4620 SSD
1 P19947-B21 HPE 480GB SATA MU SFF SC 5300M SSD
Data Storage Drives Required. Quantity 4 must be configured. One of the below supported data storage options must be included. Mixing data drive capacities within a
node is not supported.
Quantity Part number Description
4 872487-B21 HPE 4TB SAS 7.2K LFF SC MV HDD
4 819201-B21 HPE 8TB SAS 7.2K LFF SC 512e MV HDD
Optional I/O Quantity 1 Optional I/O PCIe card can be included from the below list of supported adapters:
Part number Description
817718-B21 HPE 10/25GbE 2p SFP28 BCM57414 Adapter
817753-B21 HPE 10/25GbE 2p SFP28 MCX4121A Adapter
P08421-B21 HPE 10GbE 2p SFP+ BCM57414 Adapter
813661-B21 HPE 10GbE 2p BASE-T BCM57416 Adapter
P9D94A HPE SN1100Q 16Gb Dual Port FC HBA
Q0L14A HPE SN1200E 16Gb Dual Port FC HBA
P9M76A HPE SN1600Q 32Gb Dual Port FC HBA
Q0L12A HPE SN1600E 32Gb Dual Port FC HBA
Note: One PCIe slot is available for Optional I/O.
Power Supply Dual Power Supplies recommended. Any HPE power supply supported with server platform. Refer to the HPE Power Advisor for wattage requirements.
Rail Kit Any HPE rail kit supported with server platform.
HPE Support HPE Support is required.
Commvault A Commvault HyperScale X 4-drive node Subscription E-LTU or Perpetual E-LTU must be included with each node. If perpetual E-LTU is selected,
HyperScale X then a minimum quantity of 12 Commvault HyperScale X 4-drive Node per Node 1-month Maintenance is required.
node license Commvault HyperScale X 4-drive node E-LTUs
R8S97AAE Commvault HyperScale X 4-drive Node per Node Perpetual E-LTU
R8S99AAE Commvault HyperScale X 4-drive Node per Node 1-year Subscription E-LTU
R8T00AAE Commvault HyperScale X 4-drive Node per Node 2-year Subscription E-LTU
R8T01AAE Commvault HyperScale X 4-drive Node per Node 3-year Subscription E-LTU
R8T02AAE Commvault HyperScale X 4-drive Node per Node 4-year Subscription E-LTU
R8T03AAE Commvault HyperScale X 4-drive Node per Node 5-year Subscription E-LTU
Commvault HyperScale X 4-drive Node Maintenance SKUs
R8S98AAE Commvault HyperScale X 4-drive Node per Node 1-month Maintenance
Configuration guide

LEARN MORE AT
HPE Complete Commvault Software

Make the right purchase decision.

Contact our presales specialists.

© Copyright 2022 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change
without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.

Intel Xeon Silver is a trademark of Intel Corporation or its subsidiaries in the U.S. and/or other countries. All third-party marks are
property of their respective owners.

a00060014ENW, Rev. 30