Scribd
Upload
66 views

Lecture 7. Mechanical Oscillation

This document is a lecture on mechanical oscillations from an MIT open course. It discusses the spring-mass system and how it relates to an electric RLC circuit through similar differential equations of motion. It covers topics like free and forced oscillations, beats occurring from two nearly equal frequencies, and resonance occurring at the natural frequency. Beats and resonance have applications in tuning instruments, radar technology, and engineering failures like bridges.

Uploaded by

Paratus Alcántara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views

Lecture 7. Mechanical Oscillation

This document is a lecture on mechanical oscillations from an MIT open course. It discusses the spring-mass system and how it relates to an electric RLC circuit through similar differential equations of motion. It covers topics like free and forced oscillations, beats occurring from two nearly equal frequencies, and resonance occurring at the natural frequency. Beats and resonance have applications in tuning instruments, radar technology, and engineering failures like bridges.

Uploaded by

Paratus Alcántara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

MIT OpenCourseWare

http://ocw.mit.edu

18.034 Honors Differential Equations


Spring 2009

For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms.
LECTURE 7. MECHANICAL OSCILLATION

The spring-mass system and the electric circuit. If a mass m is attached to one end of a sus­
pended spring, it will produce an elongation, say y0 , which, according to Hooke’s law, is propor­
tional to the force of gravity

ky0 = mg,
where k > 0 is the stiffness constant of spring and g > 0 is the
gravitational acceleration. If an additional force is applied and
the spring is stretched and if the force is then removed, the spring-
mass system will start oscillating. The problem is to determine the
subsequent motion.
Let y = y(t) be the displacement of the mass from the rest state
y0 . The forces exerted on the mass are the force of gravity plus the
tension in the spring k(y0 +y), which acts in the opposite direction
to the exerted force. Thus,

F = mg − k(y0 + y) = −ky.

By Newton’s second law of motion we obtain the equation of mo­ Figure 7.1. The spring-mass
tion system

my �� + ky = 0.
In a more complete description of the motion of the spring, we
take into account of the damping effect and the external force. If the mass is in a resisting medium
in which the damping is proportional to the velocity y � , and if an external force f (t) is exerted then
the equation of motion becomes

(7.1) my �� + ry � + ky = f (t),

where r > 0 is the constant of resistance.


Next, we explore a striking analogy between the spring-mass system and an RLC circuit.
Let a source of electromotive force be connected in a series with a ca­
pacitor, an inductor, and a resistor. Let v = v(t) measure the voltage
across the capacitor. By Ohm’s law, the voltage equation is
1 1
(7.2) Lv �� + Rv � + v = v0 (t),
C C
where L > 0 is the inductance, R > 0 is the resistance, C > is the ca- Figure 7.2. The RLC circuit
pacitance, 1/C is the elastance, and v0 (t) is the voltage at the source.

Both (7.1) and (7.2) are linear second-order differential equations with constant coefficients.
Analysis of these equations leads to the concepts of phase lag and gain, beats and resonance,
which are subjects of this lecture.

1
Free oscillations. We first consider the undamped unforced oscillation
(7.3) my �� + ky = 0 or y �� + ω02 y = 0
where ω02 = m/k > 0 is called the natural frequency.
From the last lecture, the general solution of (7.3) is given by
y(t) = c1 cos ω0 t + c2 sin ω0 t,
where c1 and c2 are arbitrary constants. Further, the solution can be written as
y(t) = A cos(ω0 t − φ),
and it describes an oscillatory motion, called the simple harmonic motion. Here, A � 0 (or better |A|)
is called the amplitude, and φ is called the phase lag. The motion is periodic with the period 2π/ω0 .

Exercise. (Conservation of energy) Let v = y � . Show that


1 1
mv 2 + ky 2 = E
2 2
defines the solution of (7.3) implicitly. The equation expresses the principle of conservation of en­
ergy; (1/2)mv 2 represents the kinetic energy of the moving mass (v is the velocity) and (1/2)kv 2
represents the work
� y � y
W = F dy = ky dy
0 0
needed to strech the spring by the displacement y, and hence the potential energy. In the ab­
sence of damping or external forcing, one would expect that the total energy, the kinetic plus the
potential, remain constant in time. This exercise confirms the expectation.

Undamped forced oscillations. Next, we consider the undamped oscillation with forcing
(7.4) y �� + ω02 y = ω02 f (t), ω02 > 0.
In this lecture, the forcing term is taken to be a sinusoidal input
(7.5) f (t) = A cos ωt or f (t) = B sin ωt,
where A, B and ω > 0 are real. Our choice of input functions is partly supported by that the
output of an alternating-current generator is, as a rule, sinusoidal. But, more important is that an
arbitrary periodic input is approximated by sums of trigonometric polynomials
∞ � �
1 � 2π 2π
f (t) = a0 + ak cos kt + bk sin kt ,
2 L L
k=1

called the Fourier series. If we know how a system responds to the particular inputs of the form in
(7.5) then we can treat an arbitrary periodic input by the general principle of superposition, with
the help of Fourier analysis.
Let ω �= ω0 , and we the trial solution
y(t) = a cos ωt or y(t) = b sin ωt
of (7.4) with (7.5) leads to
ω0 ω0
a= A, b= 2 B.
ω02
−ω 2 ω0 − ω 2
The ratio a/A or b/B is called the gain of the system. Note that the closer ω is to ω0 the larger the
gain becomes.

Lecture 7 2 18.034 Spring 2009


Beats. Assuming that ω �= ω0 , we consider
y �� + ω02 y = (ω 2 − ω02 ) cos ωt.
The general solution is given by y(t) = c1 cos ω0 t + c2 sin ω0 t − cos ωt.
Prescribed the null initial conditions y(0) = y � (0) = 0, the corresponding rest solution is
� � � �
ω + ω0 ω − ω0
y(t) = cos ω0 t − cos ωt = 2 sin t sin t .
2 2
If ω is close to ω0 and if both are large, then the second factor is slowly varying compared to the
first, as is shown in the figure below.

Figure 7.3. Beats.


� �
ω − ω0
The low-frequency factor sin t , in this sense, is viewed to induce amplitude modulation
�2 �
ω + ω0
on the high-frequency factor sin t . Such a modulated oscillation is called beats.
2
For a general initial data, we study the complex exponential
y(t) = Aeiωt + Bei(1+�)ωt = eiωt (A + Bei�ωt ).
The behavior of this function is sketched in the figure below.

Figure 7.4. A = 1, B = 0.5, ω = 1, � = 0.1.


�
The function |y(t)| = A2 + B 2 + 2AB cos(�ωt) serves as the amplitud modulation and it show
the “beats” effect. The maximum amplitude is A + B at time t = 2kπ/�ω. It occurs when the

Lecture 7 3 18.034 Spring 2009


phases of two constituent waves are lined up so that they reinforce. The minimum amplitude is
|A−B | (=� 0) and it occurs when the two waves are perfectly out of sync and experience destructive
interference.
Beats have applications in tuning musical instruments or radar technology. If a tuning instru­
ment and a piano string sound simultaneously at nearly the same frequency, the beats allow you
to tell how far apart the two notes are even. The slower the beats, the more nearly the string is in
tune.
In 1902 the teterodyne method was invented in which a circuit at the receiver generates a signal
that differs only slightly in frequency from the high-frequency signal of the sender. The difference
produces a frequency in the audible range. As a spin-off from radar technology, in 1946, the
heterodyne method was used to detect one-centimeter microwave radiation from the sun. This
experiment marked as a major step in radio astronomy and microwave spectroscopy.
Resonance. When ω = ω0 , the system experiences resonance. We consider
y �� + ω0 y = ω02 A cos ω0 t or y �� + ω02 y = ω02 B sin ω0 t, w0 > 0.
The particular solutions are
1 1
y(t) = Aω0 t sin ω0 t, y(t) = − Bω0 t cos ω0 t,
2 2
respectively. The amplitude (1/2)Aω0 t or (1/2)Bω0 t is proportional to t and is unbounded as
t → ∞. See the figure below.

Figure 7.5. Resonance.

The phenomenon of resonance has profound importance in engineering. The failure of the
Tacoma bridge was explained by some authorities on the basis of forced vibrations.

When the trumpets sounded, the people shouted, and at the sound of the trum­
pet, when the people gave a loud shout, the wall collapsed; so every man charged
straight in, and they took the city. (Joshua 6:20)

Lecture 7 4 18.034 Spring 2009

You might also like