Scribd
Upload
257 views

Quiz Applying Appropriate Sealant

This document contains two self-check questions to test understanding of sealants and adhesives. The first section contains multiple choice questions about the properties of different types of sealants like drying sealants, curing sealants, and catalyst-cured sealants. The second section provides a fill-in-the-blank assessment of best practices for applying sealants, such as storing sealants within their application time, warming metal surfaces to between 90-100°F, and not applying sealants to dirty or greasy surfaces.

Uploaded by

Jan Bryan Eslava
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
257 views

Quiz Applying Appropriate Sealant

This document contains two self-check questions to test understanding of sealants and adhesives. The first section contains multiple choice questions about the properties of different types of sealants like drying sealants, curing sealants, and catalyst-cured sealants. The second section provides a fill-in-the-blank assessment of best practices for applying sealants, such as storing sealants within their application time, warming metal surfaces to between 90-100°F, and not applying sealants to dirty or greasy surfaces.

Uploaded by

Jan Bryan Eslava
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

SELF-CHECK #_1_

LO 1. Identify appropriate sealant/adhesive

Directions:

Multiple Choice: Select the best answer that corresponds to the statement.

1. Referred to as one-part sealants and are supplied ―ready for use as

Packaged.

a. Curing sealant
b. Pliable sealant
c. Drying sealant
d. All of the above
2. Set and cure by evaporation of solvent.
a. Curing sealant
b. Pliable sealant
c. Drying sealant
d. Aerobic sealant
3. Catalyst-cured sealants have an advantage over drying sealants because they are transformed
from fluid or semi fluid state into a solid by chemical reaction rather than by evaporation of a
solvent.
a. Drying sealant
b. Curing sealant
c. Aerobic sealant
d. Pliable sealant
4. Glass, stone, wood and metals are types of _________.
a. sealants
b. adhesive
c. epoxy
d. surface materials
5. It is use to create an impenetration barrier to gas or moisture.
a. sealant
b. adhesive
c. urethane
d. epoxy
6. A product which use to bond between two different or similar materials.
a. Sealants
b. Adhesives
c. Urethane
d. Epoxy
7. It is added and mixed just prior to sealant application.
a. chemical catalyst
b. Adhesive
c. Epoxy
d. Urethane
8. Supplies that are known for their hardness and are used with more substances.
a. Epoxies
b. Urethanes
c. Sealants
d. Adhesives
9. Supplies used for flexible materials in high impact applications.
a. epoxy
b. urethanes
c. sealants
d. adhesive
10. Once the sealant has been applied, the parts must be
a. joint
b. torque
c. rivets
d. all of the above
Multiple Choice
e. 1. b
f. 2. c
g. 3. b
h. 4. d
i. 5. a
j. 6. b
k. 7. a
l. 8. a
m. 9. b
n. 10.d

SELF-CHECK NO. 1

LO 3. Apply sealants/adhesive evenly

Directions:

Fill in the blanks: Read the statement carefully and fill the blanks with the correct answer.

1. Sealant should be used within ___________________.


2. Sealant should not be applied to metal that is colder than __________.
3. Before the sealant is applied, the metal warmed to a temperature between
________________.
4. _________________ is the pressure filling of openings or voids.
5. The joint between two pieces of material formed by a notch and tilled projection is
called ___________________.
6. Sealant should be discarded immediately when it becomes ___________.
7. Sealant should not be used for faying surface applications unless it has been removed
from __________________.
8. Never use RTV sealant around high temperature and pressure, such as
for_______________________.
9. On engine with an oxygen sensor, use only _____________________ that says ―sensor
safe‖ on the level.
10. Sealants cannot be _________ to dirty, greases, or oily surface.

ANSWER KEYS

Fill in the blanks

11. Application time


12. 700F
13. 900F – 1000F
14. Injection sealing
15. Joggle
16. Too Stiff
17. Refrigerated storage
18. head gasket
19. RTV sealant
20. seal

You might also like