ECG Lead Placement and Identifying Lead Reversal
ECG Lead Placement and Identifying Lead Reversal
Lead reversal
Ensuring that the ECG leads are connected to the correct ECG electrode position
is very important for acquiring accurate rhythm strips and 12-lead ECGs
Lead reversal usually produces recognizable ECG abnormalities
1 2 3 4 5 6 1 2 3 4 5 6
Electrode Location
V1 C1 4th intercostal space at right border of the sternum
V2 C2 4th intercostal space at left border of the sternum
V3 C3 Midway between V2 and V4
V4 C4 5th intercostal space at midclavicular line
V5 C5 Level with V4 at left anterior axillary line
V6 C6 Level with V4-V5 at left midaxillary line
AHA leadwire labels in first column, IEC labels in second column
5R 4R 3R 1 2 3 4 5 6 6 7 8 9
Electrode Location
V3R C3R Midway between V1 and V4R
V4R C4R 5th intercostal space, right midclavicular line
V5R C5R Level with V4R at right anterior axillary line
V7 C7 Level with V4-V6 at left posterior axillary line
V8 C8 Level with V4-V6 at left midscapular line
V9 C9 Level with V4-V6 at left spinal border
Note: automated interpretation may be invalid if V leads are moved to these locations
RA LA
Limb leads may be placed on the torso
R L (pictured) or limbs
Choose an ECG electrode site away
from areas with a large amount of
adipose tissue, major muscle groups or
bony prominences
RL LL
N F
RL lead reversals
If lead II has extremely low amplitude,
check for RA RL reversal
If lead III has extremely low amplitude,
check for LA RL reversal
Additional tips
LL RL reversal has almost no effect on the ECG; you cannot identify it from
the ECG, and it has little effect on ECG interpretation
If the RL electrode has poor skin contact, ECG artifact may occur
RL is used to minimize noise from common mode voltages, such as from power lines