Scribd
Upload
346 views2 pages

Regulators-67 AFR, 1301

The document provides specifications for two pressure regulator models, the Type 1301 and 67AFR regulators. It lists details like material composition, pressure ranges, temperature and relief valve capabilities.

Uploaded by

saad kamran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
346 views2 pages

Regulators-67 AFR, 1301

The document provides specifications for two pressure regulator models, the Type 1301 and 67AFR regulators. It lists details like material composition, pressure ranges, temperature and relief valve capabilities.

Uploaded by

saad kamran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

SPECIFICATIONS Doc.

# Comp/Spec-AIF/002

Rev. # 00
REGULATORS AND w.e.f 01 Dec 2018

Title
Page 1 of 1
DIAPHRAGM Page

Pressure Regulator Type 1301 or equivalent


Operation: Direct operated high pressure reducing regulator for
Inlet pressure up to 6000 psig.
Application: Air or natural gas
Material: Body and Spring: Forged brass or
CF8M Stainless steel
Bottom Cap: Brass, 304 Stainless steel, or
316 Stainless steel
Body size & end connection style: ¼” NPT one inlet & two outlet connections.
Maximum allowable inlet pressure: 6000 psig (400bar)
Outlet pressure range: 50 to 150 psig
Maximum emergency outlet pressure: 250psig (17.2 bar)
Internal relief performance: low capacity internal relief valve
Temperature capabilities: PTFE valve disk & FKM Gaskets-20˚F to 400˚F
Pressure registration: internal
Filters: stainless steel filter
Operation mode: self-operated
Orifice size: 5/64” (2.00 mm) or as required for maintaining
outlet pressure range
Gasket: Neoprene

Page 1 of 2
© SNGPL. All rights reserved. Please don’t copy without authorization.
SPECIFICATIONS Doc. # Comp/Spec-AIF/002

Rev. # 00
REGULATORS AND w.e.f 01 Dec 2018

Title
Page 2 of 1
DIAPHRAGM Page

67AFR Regulator

Body type: Aluminum body.


Body size & end connection style: ¼” NPT Screwed.
Maximum allowable inlet pressure: 250psig (17bar)
Outlet pressure range: 3 to 100psig
Maximum emergency outlet pressure: 50psig over outlet pressure setting or 100psig.
Internal relief performance: Low capacity internal relief valve.
Temperature capabilities: Nitride parts- 20˚F to 150˚F
Floroelastrometer parts 0˚F to 350˚
Pressure registration: internal
Filters: Stainless steel filter
Operation mode: Self-operated
Note:-

 Bidder shall furnish technical literature along with bid document.

Page 2 of 2
© SNGPL. All rights reserved. Please don’t copy without authorization.

You might also like