1.

Use different ways of expressing

concentration of solutions: percent by mass,
mole fraction, molarity, molality, percent by
volume, percent by mass, ppm.

2. Perform stoichiometric calculations for

reactions in solution.

3. Describe the effect of concentration on the

colligative properties of solutions .
4. Differentiate colligative properties of
nonelectrolyte solutions and of electrolyte
solution.

5. Calculate the boiling point elevation and

freezing point depression from the
concentration of a solute in a solution
6. Calculate molar mass from colligative
property data.

7. Describe laboratory procedures in

determining concentration of solution.
EQ:What types of solutions are encountered
everyday?
Identify the solute and solvent in each of the
following solutions, explain your answers.

1. 25 grams of salt dissolved in 95 mL of water.

2. 25 mL of water mixed with 75mL of isopropyl
alcohol.
2. Tincture of iodine prepared with 0.20 gram of
iodine and 20.0 ml of ethanol
Solutions are mixtures of two or more
substances distributed throughout a single
phase.

Atoms, ions, or molecules are thoroughly

mixed in a solution such that each part of the
mixture has uniform composition and
properties.
A solution consists of a solute and a solvent.
The Solute is the substance dissolved in a
solution and is usually present in smaller
amount; solvent is the dissolving medium.
SOLUTE SOLVENT SOLUTION EXAMPLE
GAS GAS GAS Oxygen in
Nitrogen
GAS LIQUID LIQUID Carbon Dioxide
in water
GAS SOLID SOLID Hydrogen in
Palladium
LIQUID LIQUID LIQUID Ethanol in
water
LIQUID SOLID SOLID Mercury in
silver
SOLID LIQUID LIQUID Salt in water
SOLID SOLID SOLID Copper in tin
(bronze)
A solution can be classified as unsaturated,
saturated, or supersaturated depending on
the quantity of solute present in it.
Unsaturated Solution contains less solute
than solvent’s capacity to dissolve. This
means that the solvent can still dissolve more
solute.

Saturated Solution contains the maximum

amount of solute that the solvent can
dissolve ata certain temperature.
 Supersaturated solution contains more
dissolved solute than is present in a saturated
solution. This type of solution is unstable such
that the excess solute can crystallize in the
solution by adding a “seed crystal” (a process
called seeding) or by scratching the sides of
the container.
General Chemistry2

EQ: How do liquid solutionforms?

 For two substances to form a solution, they
must have the same nature in terms of
Polarity.

The formation of liquid solution takes place in

three steps:

1. Overcoming the intermolecular forces in the

solvent to give room for the solute.
2. Separating the solute into its individual
components.

3. Allowing the solute and solvent to interact

to form thesolution.
 It is the enthalpy change associated with the
formation of the solution.
It is equal to the sum of the H values for
the three steps.

A positive enthalpy of solution signifies an

endothermic process, while negative indicates
an exothermic process.
The process is exothermic, if more energy is
released when new bonds form than is used
when bonds arebroken.

The process is endothermic, if more energy is

required (used) when bonds are broken than
is released when new bonds are formed.
 General Chemistry2

EQ:Why should solutions be expressed in a

correct concentration units?
 It is a measure of the amount of solute in a
given amount of solvent or solution.
One type of solution may be prepared and
expressed in differentconcentrations.

Example:
A cup of hot water with one teaspoon of
coffee is an altogether different solution than
a cup of water with a few teaspoon of coffee.
Example:

Medications are also solutions of substances,

A 5 mL dose of a certain concentration of
medicine might cure a sick person, but a 5 mL
dose of a higher concentration might already
harmful to the person.
1. Percent by Mass
2. Percent byVolume
3. Percent by Mass-Volume
4. Mole Fraction
5. Molality
6. Molarity
7. Parts per Million
1. A saline solution
with a mass of 355 g has
36.5 g of NaCl dissolved in it. What is the
mass percent concentration of the
solution?
Given:
Mass of Solute = 36.5 grams
Mass of Solution = 355 grams
𝑚𝑎𝑠𝑠𝑜𝑓𝑠𝑜𝑙𝑢𝑡𝑒
Formula: Percent by mass= x 100
𝑚𝑎𝑠𝑠𝑜𝑓𝑠𝑜𝑙𝑢𝑡𝑖𝑜𝑛

36.5 𝑔𝑟𝑎𝑚𝑠
Percent by mass= x 100
355 𝑔𝑟𝑎𝑚𝑠

Percent by mass = 10.28%

2. A wine contains 12% alcohol by volume.
Calculate the volume (in mL) of alcohol in
350 mL ofthe wine.
Given:
Percent by Volume = 12%
Volume of Solution = 350 mL
Volume ofsolute = x

𝑣𝑜𝑙𝑢𝑚𝑒𝑜𝑓𝑠𝑜𝑙𝑢𝑡𝑒
Formula: % by volume = x 100
𝑣𝑜𝑙𝑢𝑚𝑒𝑜𝑓𝑠𝑜𝑙𝑢𝑡𝑖𝑜𝑛

𝑥
12 % = x 100
35𝑂 𝑚𝐿

12
(350 mL) = x
100
42 mL = x
Percent by Mass –Volume = mass of solute in grams X100
volume of solution inmL

1. What is the concentration in percent by

mass/volume of 150 mL of solution
containing 30 g of solute?
Given:
volume of solution (mL) : 150 ml
mass of solute (g) : 30grams

Find:
% by mass-volume

Formula:
𝑚𝑎𝑠𝑠𝑜𝑓𝑠𝑜𝑙𝑢𝑡𝑒𝑖𝑛𝑔
% by mass-volume= x 100
𝑣𝑜𝑙𝑢𝑚𝑒𝑜𝑓𝑠𝑜𝑙𝑢𝑡𝑖𝑜𝑛𝑖𝑛𝑚𝐿
 30 𝑔𝑟𝑎𝑚𝑠
% by mass-volume = x 100
150 𝑚𝐿

= (0.20) x100

= 20 %
A 50 mL of 12% by mass-volume solution was
used in an experiment. How many grams of
solute does the solution contain?
A 50 mL of 12% by mass-volume solution was
used in an experiment. How many grams of
solute does the solution contain?

Given:
volume of solution in mL = 50 mL
% by mass-volume =12%

Find:
Mass of solute in grams = ?
Formula:
𝑚𝑎𝑠𝑠𝑜𝑓𝑠𝑜𝑙𝑢𝑡𝑒𝑖𝑛𝑔
% by mass-volume= x 100
𝑣𝑜𝑙𝑢𝑚𝑒𝑜𝑓𝑠𝑜𝑙𝑢𝑡𝑖𝑜𝑛𝑖𝑛𝑚𝐿

𝑥
12 % = x 100
50 𝑚𝑙

12
(50ml) =x
100

6 g =x
The mole fraction (x) of a component in a
solution is equal to the number of moles of
the component divided by the total number
of moles of all the components present.

The sum of all of the mole fractions of all

components in all solution will always be
equal to one.
1. 25g of NaF is mixed with 200 g of H2O.
What is the mole fraction of NaF in the
solution?

Step 1:
Given:
solute:
solvent:

Find:
1. 25g of NaF is mixed with 200 g of H2O.
What is the mole fraction of NaF in the
solution?

Step 1:
Given:
solute: 25 g of NaF
solvent: 200 g of H2O

Find: mole fraction ofNaF

Formula:

Step 2: Convert the given mass of solute and

solvent into moles using molar mass.

Given:
Mass to mole
- solute: 25 g ofNaF

Molar Mass
Na : 1 x 23 = 23g/mole
F : 1 x 19 = 19g/mole

Total Molar Mass: 42g/mole

Mass to mole

1 𝑚𝑜𝑙𝑒
25 g of NaF X = 0.60 moles ofNaF
42 𝑔

Moles of solute: 0.60 mole of NaF

Mass to mole
- solvent: 200 g of H2O
Molar Mass
H : 2 x 1 = 2 g/mole
O : 1 x 16 = 16g/mole

Total Molar Mass: 18 g/mole

Mass to mole

1 𝑚𝑜𝑙𝑒
200 g of H2O X = 11.11 moles of H2O
18 𝑔

moles of solvent: 11.11 moles ofH2O

moles of solute + moles ofsolvent
=

Total Moles ofSolution

Moles of solute = 0.60 moles of NaF
Moles of solvent = 11.11 moles ofH2O

Total Moles of Solution = 11.71moles

Moles of solute = 0.60 moles of NaF
Total Moles of Solution =11.71 moles

0.60 𝑚𝑜𝑙𝑒𝑠𝑜𝑓𝑁𝑎𝐹
Xsolute = 11.71 𝑚𝑜𝑙𝑒𝑠

Xsolute = 0.05 (Final Answer)

Moles of solvent = 11.11 moles ofH2O
Total Moles of Solution =11.71 moles

11.11 𝑚𝑜𝑙𝑒𝑠
Xsolvent = 11.71 𝑚𝑜𝑙𝑒𝑠

Xsolvent = 0.95
Xsolute =0.05
Xsolvent =0.95

Total =1
Calculate the mole fraction of each component
of a solution containing 65 g of ethanol (C2H6O)
in 350 g ofwater?
The molality of a solution is the number of
moles of solute per kilogram of solvent.
 Calculate the molality of a solution containing
16.5 g of dissolved naphthalene (C10H8) in
0.0543 Kg benzene (C6H6).

STEP 1
Given:
Solute:
Solvent:

Find:
 Calculate the molality of a solution containing
16.5 g of dissolved naphthalene (C10H8) in
0.0543 Kg benzene (C6H6).

Given:
Solute: 16.5 gC10H8
Solvent: 54.3 gC6H6

Find: molality
STEP 2: Convert the mass of solute into moles
using its molarmass.

Solute: 16.5 gC10H8

C: 10 x 12 = 120 g/mole
H : 8 x 1 = 8 g/mole

Total MolarMass = 128 g/mole

STEP 2: Convert the mass of solute into moles
using its molarmass.

𝟏𝒎𝒐𝒍𝒆
16.5 g C10H8 x = 0.132 moles ofC10H8
𝟏𝟐𝟖𝒈
STEP 3: Calculate the Molality using the
formula.

𝟎.𝟏𝟑𝟐𝒎𝒐𝒍𝒆𝒔
m = 0.0543 Kg

m = 2.49 moles/Kg
10g of NaOH is dissolved in 500 g water . What
is the molality of solution?
Molarity of solution is the number of moles of
solute per liter of solution. It is especially
useful in doing stoichiometric calculations
involving solution.
Determine the molarity of a solution
containing 2.40 g of sodium chloride (NaCl) in
40.0 mL ofsolution.
 Determine the molarity of a solution
containing 2.40 g of sodium chloride (NaCl) in
40.0 mL ofsolution.

STEP 1
Given
Solute:
Solution:

Find: Molarity
 Determine the molarity of a solution
containing 2.40 g of sodium chloride (NaCl) in
40.0 mL ofsolution.

STEP 1
Given
Solute: 2.40 g of NaCl
Solution: 40 mL ------ 0.04 L

Find: Molarity
STEP 2: Convert the given mass of solute into
moles using molarmass.

Solute: 2.40 g of NaCl

Na : 1 x 23 = 23 g/mole
Cl : 1 x 35 = 35g/mole

Total Molar Mass of solute: 58g/mole

STEP 2: Convert the given mass of solute into
moles using molarmass.

1 𝑚𝑜𝑙𝑒
2.40 g of NaCl x = 0.04 moles
58 𝑔𝑟𝑎𝑚𝑠
STEP 3: Calculate the molarity using the formula.

𝟎.𝟎𝟒𝒎𝒐𝒍𝒆𝒔
M=
𝟎.𝟎𝟒𝑳

M = 1 mole/L
Determine the molar concentrations of a
solution that contains 25g of potassium
hydroxide (KOH) in 250 mL of solution.
What is the molarity of 0.25 mol of NaCl in
300 mL of solution?
Parts per million (ppm) expresses the number
of parts of solute per one million/billion parts
of solution.
1. 25 grams of sodium chloride is dissolved
in
100 grams of water, What is the
concentration of the sodium in parts per
million (ppm)?
STEP 1
Given Find: ppm
Solute :
Solvent :
Solution :
1. 25 grams of sodium chloride is dissolved
in
100 grams of water, What is the
concentration of the sodium in parts per
million (ppm)?
STEP 1
Given Find: ppm
Solute : 25 grams NaCl
Solvent :100 grams water
Solution : 125grams
STEP 2: Calculate the ppm using the formula.

𝟐𝟓𝒈𝒓𝒂𝒎𝒔
ppm = 𝒙𝟏𝟎𝟔
𝟏𝟐𝟓𝒈𝒓𝒂𝒎𝒔

ppm = 200,000