21 STEPS DESIGN PROCESS

There Is A Complete 21 Steps Design Process For Design Any

Kind Of Architectural Small Or Mid Size Project.
From Start To End Complete Work, We Should Know Each &
Every Detail About Our Project Before Execute Anything On-
Site, So We Can Explain Everything Properly.
And After That, We Could Go Further Confidently.
For More Details About Planning And Designing Sign Up For
Free Master Planner FREE Training Webinar.
Link- Www.Rupeshrange.Com/Signup

PS: In This Book, You Can Easily Understand The Process Of

Any Architectural Project Designing.

“We Are Not Selling We Are Serving”.

For More Knowledge Join Our Social Channels.

Here Is the Link-
Face book group- https://www.facebook.com/groups/776288429675654

Instagram- https://www.instagram.com/rupeshkparate/

YouTube channel-
https://www.youtube.com/channel/UChQuuyPviCFirPaptKZsZ2g

1
#1. STEP- CLIENT MEETING
- Before all of you need to learn a skill set.
- Meet with the client and make a familiar relation with
him.
- Learn a few communication techniques.
- Most importation makes you perfect in “CSPO” formula.
(For this the “CSPO” formula please attend the Master
Planner Training Webinar- your entire planning concepts
will clear).

2
#2 STEP- PLOT MEASUREMENTS
- First of all fix al
all, corners then measure them m.
- Check on-site
site condition
conditions for good planning (all
directions & possibilities).
- Which measurement is good manual or electronic?
It is depending from the project to project.
- Be aware while measuring if you miss anything or are
not careful then it will cost you more time because of
re-measureme
measurements nts as well as redesigning all the plans &
designs.

3
#3 STEP- TAKE A CLIENT REQUIREMENT IN DETAILS.
- While taking client requirements don’t miss anything &
note down each & every detail they want.
- In the beginning, it is a little hard but after a few project,
you will understand it is just a piece of cake.
- Most important note down client routine as well as
observe members.

4
#4 STEP- PITCH FREE HAND SKETCH AT THAT TIME AS
PER THERE REQUIREMENTS.
- You should expert on this because this is the exact
situation where your client will close.
- That’s why you should perfect floor planning because in
the first meeting they will discuss only two topics first is
planning & another is budgeting.
- You can learn to budget on any YouTube video or you
can tell them roughly as well but,
There is no option for floor planning & designing. &
there are a lot of stuff behind perfect floor planning
which we are going to expose in our training webinar.
(rupeshrange.com/signp)

5
#5 STEP- CREATE 2-3 FLOOR PLAN ALTERNATIVES AS
PER CLIENT REQUIREMENTS.
- Yes, you read right you need to design at least 2-floor
plan options because we don’t know what is the exact
pitcher of house in his/her mind.
- While designing a floor plan learn a few things like-
planning impact, zoning, the effect of requirements on
planning & execution (if you want to learn all those
concepts please attend “Master Planner Training
Program”).
- Floor Planning is the base of every architectural design
so learn it properly first.

6
#6 STEP- EXPLAIN TO THE CLIENT & FINALIZE THE
FLOOR PLAN OR EDIT & OPTIMIZE & THEN FINALIZE IT.
- Show them all of your alternatives & explain them.
- Finalize one of them or optimize it because without
finalizing the floor plan we cannot go further.
- PS: before discussing any plan with the client check
twice. We should play safe.

7
#7 STEP- DISCUSS BUILDING ELEVATION WITH CLIENT
& IDENTIFY THE CLIENT INTEREST.
- Every client has their own perception & interest so first
of all identify it, otherwise, your entire elevation design
& time will be less. So be aware.
- Whenever designing elevations think about on-site
execution as well as think about elevation material.
- It should not only aesthetic it should practical, usable,
and sensible as well.

8
#8 STEP- DESIGN 2-3 ALTERNATIVES WITH DIFFERENT
STYLE & PATENT.
- (Remember floor plan & building elevation is the most
important thing from the client’s perspective.)
- Finalize floor plan & font elevation carefully then go
ahead.
- Those two are the most important drawings from the
client perspective as well as project perspective so...
finalizes both planning & elevation very cares fully.

9
#9 STEP- AFTER THAT LOCATE A COLUMN IN FLOOR
PLAN & DECIDE FLOOR HEIGHT
(ASK TO THE CLIENT FOR HEIGHT THEN FINALIZE).
- Finalize all floor heights so you can easily go towards
further drawings.
- Height is also a very essential factor don't miss it &
ask Clint at least once because might be there would be
a different plan in the client's mind... in this case, if you
design all other detail drawings & working drawings
then.... you know what will happen so ask once.

10
#10 STEP- DESIGN ALL STRUCTURAL DESIGN
DRAWING FROM FOUNDATION TO TILL SLAB &
OTHER FLOORS AS WELL.
- Don’t go solo, if you are a structural & architectural
designer then it’s ok.
- But if you are not professional then hire a structural
designer because our entire building will stand only on
his/her structure design & safety first.
- Design all the drawings like- Foundation, plinth, sill,

lintel, slab & same for all above floors.

11
#11 STEP- ELEVATION DETAIL DRAWINGS-
- Analyze elevation design properly & finalize elevation
detailed working drawings. (we can design elevation
detail drawings before structural design)
- Mention all the concepts behind it as well as material
use.
- Elevation detail drawings are almost the most important
working drawings for elevation design so be careful full
& check each & every detail before delivering to civil
contractor.
- Compound wall & gate design as per elevation design &

client requirements.

12
#12 STEP- DESIGN CENTRELINE PLAN-
- Based on structural design of foundation details.
(Countercheck all centres before layout demarcation).
- If your foundation is perfect as per drawing then there
could be a lot of chances of success.
- In this field start of the project should be perfect at any
cost.

13
#13 STEP- CREATE DETAIL DIMENSION PLAN
- Detail dimension plan is very important for missionary
work, ground floor & all above floor as well.
- As well as it is necessary for door & window placements.
- I think this is the easiest drawing in the architectural
project.

14
#14 STEP- OPENING SCHEDULE
- Design all floor plan opening schedules at a time.
- Provide all details like door, windows, ventilator, arches,
frame size & material, etc.
- In this section, you should design at least 3 sheets
1. Labelled openings in the floor plan.
2. Proper schedule as per labelled floor plan.
3. Design opening elevation & here give more details
about.

15
#15 STEP- STAIRCASE DETAIL DESIGN
- There is a lot of staircase type but, we need to
understand which staircase type is suitable for our
project.
- In the staircase design counter check the entire design if
there is something lacking then fill it & design a detailed
working drawing.
- In Staircase design & detailed working drawings you
should mention all the important factors like tread,
riser, landing, width, headroom, etc.

16
#16 STEP- ELECTRICAL LAYOUT
- First of all study basic things about the electrical layout
so we can design it exactly as per client as well as
project need.
- Project to project could be different & it Is totally based
on practical use.
- And in this drawing, we need to give all details like
switch board position height, all electrical appliances &
their operations, one way two ways, etc.
- (There is a lot of extra stuff we need to understand for
perfection).

17
#17 STEP- DRAINAGE LAYOUT
- Drainage layout is also one of the most important
drawings.
- Doesn’t matter project is big or small but if drainage
system will fail human being will not going to stay there
in fact every drainage should be perfect as per condition
- Whenever you will design drainage layout study all
important concepts alike- type of pipes, traps, clearance
spaces, IC & most important sloping.

PS: Always design drainage layout from top floor to

ground floor.

18
#18 STEP- FLOOR DESIGN
- There is a lot of option s available in the market for floor
design, but most people prefer tile or stone.
- But, Tile pattern or stone design it is totally depend on
client need, requirement & interior designs.
- Toilet interior:- toilet tiles patterns/design options +
kitchen platform as per client selection.
- In this both cases we need to design drawings as per
project & layout. (it is totally depending on project)

19
#19 STEP- DOOR & WINDOW DESIGN
- Door & windows designs are also totally based on client
requirement & budget, because there is lot of options
available in the market.
- This is a starting part of interior work so, if you are
designing a interior as well to think about all the interior
concepts as well as standards & aesthetic sense.

20
#20 STEP- FINISHING STAGE-
- At this stage go through a putty>> then primer>> & then
painting/texture as per client requirements or as per
your interior design concept.
- This is a part of the interior, if clients think about proper
interior designing then guides them.
PS: think about the entire combination of floor, ceiling,
curtains, furniture & color while painting.

21
#21STEP- INTERIOR WORK-
- There is a lot of things on the interior actually interior is
a combination of all things like- false ceiling (POP),
furniture, all aesthetic color combination, etc.
- It is totally part of interior design.

PS: Learn interior as well so you can add more revenue

in your pocket from the same project.

22
COPYWRITE- WWW.RUPESHRANGE.COM
(BY- RUPESH KISHOR PARATE)

23