0% found this document useful (0 votes)
116 views

Ilive Range Block-Diagram 2

The document provides a system block diagram for an iLive digital mixing console. It has the following key elements: - 64 input channels that can be configured as mono or stereo and each have preamp, HPF, gate, EQ, compression, and delay processing. - A 32 bus, 32 mix channel DSP engine for routing signals and applying effects. - Assignable buses including group, auxiliary, and effects buses that can be routed to the main mix or monitor outputs. - Main left/right and monitor left/right outputs with digital and analog connections that signals can be routed to post processing.

Uploaded by

Sandi Simon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
116 views

Ilive Range Block-Diagram 2

The document provides a system block diagram for an iLive digital mixing console. It has the following key elements: - 64 input channels that can be configured as mono or stereo and each have preamp, HPF, gate, EQ, compression, and delay processing. - A 32 bus, 32 mix channel DSP engine for routing signals and applying effects. - Assignable buses including group, auxiliary, and effects buses that can be routed to the main mix or monitor outputs. - Main left/right and monitor left/right outputs with digital and analog connections that signals can be routed to post processing.

Uploaded by

Sandi Simon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

iLive SYSTEM BLOCK DIAGRAM 12/12/12

Fixed Format Surface 64 input channel x 32 bus x 32 mix channel DSP Engine Assignable buses GRP/AUX/FX MAIN MTX PAFL Fixed Format Surface
Inputs iLive-T80, R72 Outputs iLive-T80, R72
PP
remote SPDIF RCA 0dBu TRS +4dBu
A INPUT INPUT CHANNEL x 64 Configure as Mono or Stereo channels Strip METER PFL + SPDIF RCA 0dBu TRS +4dBu
B
PAFL MONO LOCAL L
TB MIC TRIM PATCH INSERT multi-point Peak AFL
in-place
^ -
Skt, Port B or RackFX DAC BAL relay
+ 7/8 6 5 4 3 2 1 MUTE FADER ASSIGN+PAN 7/8 6 5 4 3 2 1
ADC +
- WIDTH TRIM HPF GATE PEQ COMP LIM DELAY R
line
POL IP to MAIN MONITOR - digital line
digital in ADC 0 L R PHONES DAC
MODE +4/-10 DE-ESS IP to GRP

iLive-T112 iLive-T112
L R
SPDIF RCA 0dBu TRS +4dBu SPDIF RCA 0dBu TRS +4dBu Post-Preamp Post-HPF Post-Gate Post-Insert Post-PEQ Post-Comp Post-Lim Post-Delay
C A MixRack Skt
Source
Post IP to AUX/FX TRS +4dBu
D SPDIF RCA 0dBu TRS +4dBu
B
Pre LEV
option per AUX mix
7/8 6 5 4 3 2 1 7/8 6 5 4 3 2 1 Surface Skt Source TRIM DIRECT OUT 4 3 2 1 7/8 6 5 4 3 2 1
For stereo channel only
Port B inputs Global option for DIRECT OUT Follow MUTE Follow FADER

Fixed Format MixRack Fixed Format MixRack iDR-16 Slot G = 8 outputs

Surface Talkback
iDR-32 Slot G-H = 16 outputs
1 8 power up/down mute
Slot
MIC/LINE inputs 48V FX SHORT SEND x8 RackFX x8 FX SHORT RETURN x8 BAL Out iDR-48 Slot G-I = 24 outputs
remote Strip METER PFL +4dBu
A-H
GAIN PFL DFX AFL DAC + iDR-64 Slot G-J = 32 outputs
PAD RackFX 1-8 out Strip METER AFL Send > Return FX FADER in-place -
iDR-16 Slot A-B = 16 inputs Inserted FX Gate MUTE ASSIGN+PAN PHONES
+ FADER Duck
ADC MUTE PEQ Ret to MAIN relay
iDR-32 Slot A-D = 32 inputs - L R AES
PAFL DAC

iDR-48 Slot A-F = 48 inputs -25dB From: Patch to:


Ret to GRP
AES digital out
iDR-64 Slot A-H = 64 inputs Short Send Short Return
(option)
(2 dual channel AES output sockets per option card fitted)
or or L R
Any MIX Full IP Channel Ret to AUX/FX
Post
Input DIR OUT IP or MIX INSERT
Modular MixRack and Surface Port A Other RackFX Output Patch Pre LEV
Modular MixRack and Surface
iDR-10 iLive-80, 112, 144, 176 Surface to MixRack link
10 I/O slots 4 I/O slots 64 Inputs CHK ANALOGUE OUT
METER
ANALOGUE IN TALKBACK Assign to: GRP
AUX
SIG GEN To: GRP
AUX MUTE
LINE
MIC/LINE Port B PATCH from: Press to TALK MAIN Sine (Sweep 20-20kHz) MUTE MAIN power up/down mute BAL relay
remote MIC PREAMP x 8 HPF ASSIGN MATRIX White Noise LEV ASSIGN MATRIX 1
1 Surface Talk mic DAC +
Audio interface option slot to Pink Noise to
CHK 48V Any input socket -
MIX Bandpass Noise (Sweep) MIX
remote 64 Inputs Any Port B input iLive-80, 112, 144, 176
PP GAIN 4 I/O slots MULTI DIGITAL OUT 2
PAD ACE
2
+ ADC
MADI iDR-10
-
Dante
10 I/O slots ADAT 1 CHK
EtherSound MUTE
-25dB 1-16 1-8 3
Waves
DUAL MIC IN 2
3 USER
CHK CONTROL
9-16 3
PP GRP/AUX/FX MAIN MTX PAFL DIGITAL OUT 4
G
4
1
A +
_ A/B OUTPUT Port A 4
B
G
+
MIC PREAMP PATCH 1-2
iDR
_ MIX MASTER (GRP, AUX, MAIN) Surface to MixRack link EXP 5 5
(AS ABOVE)
PFL
5 Strip METER AFL 64 Outputs 1-8
A INSERT 6
2 multi-point peak
DIGITAL IN Skt, Port B or RackFX 28-band 1/3 octave FADER BAL
B MUTE Port B 6
(Main LR only) 7
PEQ GEQ COMP DELAY LIMITER 9-16
6 L R Mix Output
A 1-2 + GRP/AUX/MAIN Audio interface option
+4/-10 8
3
B 64 Outputs
GRP to MAIN Input DIR OUT 7
L R AES/EBU
ACE EXP IN 9
7 EXT IN - PATCH from:
A TRIM POL MixRack inputs MADI CHK
4 Any input socket 10
Dante
B Any Port B input 0 L R 8
EtherSound MUTE SPDIF
RackFX 1-8 Post GRP to AUX/MTX Port B inputs AVIOM
8 Post-Dly Waves 11
remote Surface Talk mic Pre MMO - ADAT OUT
LEV OPTICAL
A AES/EBU CHK Port A inputs iDR
5 12
B Configuration: L R
AVIOM M-LINEOUT-A
Pre-Dly PAFL monitor HEARBACK 5-6
30 x Bus = GRP, AUX, FX, MAIN Post AUX/MAIN to MTX 13
SOURCE HEARBCK 1-2
M-MICIN-A SPDIF 32 x Mix processing = GRP, AUX, MAIN, MTX, ( WEDGE, IEM) Pre
A LEV Wedge monitor
6 Configure GRP, AUX, FX mix = Mono or Stereo 14
B 3-4
OPTICAL Configure MAIN mix = NONE (monitors), LR, LCR, LCR+, LRM, LRSub, LCRSub
IEM monitor OUT 15 5-6
A
7 5-6 RackFX 1-8 out 16 7-8
B
7-8 9-10
MATRIX
A
8 M-MULTIOUT-A
B
EXT IN - PATCH from:
TRIM POL MATRIX MASTER 11-12
Any input socket
Any Port B input 0
Configure as MONO or STEREO Input active MONITOR 13-14
PFL Output active
RackFX 1-8 Strip METER AFL PAFL MixRack
PHONES HEARBACK 15-16
7-8 Surface Talk mic INSERT multi-point peak IEM to PHONES PAFL
M-DUALIN-A ext power
Skt, Port B or RackFX 28-band 1/3 octave DAC AVIOM stereo link
FADER
MUTE
PEQ GEQ COMP DELAY LIMITER remote
MTX Output Strip METER M-DIGOUT-A
PP + FADER
+4/-10 MUTE power up/down mute
TRIM
IEM DAC MONITOR +
L
TB MIC MONO LOCAL Surface
^ -
+ LOCAL PAFL IN BAL relay
+ SUM

+
EXT TALK to PAFL Processing option
- Any input socket PREAMP PFL/AFL MONITOR RTA for listen WEDGE / IEM Strip METER
-
R
M-DIGIN-A FADER L BAL R
TB OUT Any Port B input 31-band 1/3 octave MUTE
BAL PFL TRIM + PHONES
+ Surface Talk mic
AFL not affected by Trim WEDGE - LOCAL MONITOR
- TALKBACK DELAY
Surface -24dB 0dB
Meters are pre-Trim

You might also like