mo Mea

Motor control and protection nit su

r
CM orin ing
Ra g re &
ng lay
e s

Motor control and protection

6
CM-E Range

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

 & s
ing elay
su
r r Motor control and protection
ea ng e
M itori ang Benefits and advantages
n R
mo CM

UMC100-FBP is a flexible, modular and expandable motor management system for constant-speed low-voltage range motors.
Its most important tasks include motor protection, prevention of plant standstills and the reduction of down time. This is made possible by
early information relating to possible motor problems which avoids unplanned plant standstills. Even if a motor trips, quick diagnosis of the cause of
the fault serves to reduce downtime.

UMC100-FBP combines in a very compact unit:

Motor protection Communication
� Overload, underload � Communication-independent basic device
� Overvoltage, undervoltage � Freely selectable fieldbus protocol with FieldBusPlug
6 � Blocked rotor, low / high current � Profibus DP
� Phase failure, imbalance, phase sequence � DeviceNet
� Earth leakage � Modbus
� Thermistor protection � CANopen
� Limitation of starts per time
� One single version with integrated measuring system covers the rated
Typical application segments
� motor current from 0,24 to 63 A � Oil & gas
� Cement
Motor control
� Integrated and easy to parametrize motor starter functions like direct, � Paper
reverse, star-delta,... � Mining
� Additionally free programmable logic for application specific control � Steel
functions � Chemical industry
� Expansion modules DX111, DX122 for more I/Os
� Expansion modules VI150, VI155 for 3-phase voltage measuring

Motor diagnostics
� Quick and comprehensive access to all relevant data
via fieldbus and/or operator panel
� Current, thermal load
� Phase voltages
� Power factor
� Energy

Further information
UMC & FBP Catalogue 2CDC 190 022 D0204
UMC & FBP Brochure 2CDC 135 011 B0202

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

 mo Mea
nit su
Motor control and protection r
CM orin ing
Technical data Ra g re &
ng lay
e s

Basic device UMC100-FBP

UMC100-FBP allows the connection of one I/O-expansion module DX111 or DX122, and one voltage module VI150
or VI155. Expansion modules are connected via 2-wire bus, the max. distance to UMC100-FBP is 3 m.

Main power
Voltage max 1000 V AC
Frequency 45 to 65 Hz
Rated motor current 0.24 to 63 A, without accessories
Greater currents with transformer
6
Transformer diameter 11 mm (max 25 mm2)
Tripping classes 5, 10, 20, 30, 40 in accordance with EN/IEC 60947-4-1
Short-circuit protection Separate fuse on network side

Control unit
Supply voltage 24 V DC
Reverse polarity protection yes
Inputs 6 digital inputs 24 V DC
1 PTC input
Outputs 3 relay outputs relay
1 digital output transistor
Interfaces 1 for ABB FieldBusPlug
1 for UMC100-PAN control station
1 for expansion module
Parametric assignment via fieldbus, control station and / or software
Addressing Control station or addressing set
LEDs 3 LEDs: green, yellow, red

Environment and mechanical data

Fastening on DIN busbar (EN50022-35) or with 4 screws x M4
Dimensions (W x H x D) 70 x 105 x 110 mm (incl. FieldBusPlug and control panel)
Weight 0.39 kg
Terminal cross-section max. 2.5 mm² or 2 x 1.5 mm²

I/O-expansion modules DX111 / DX122

Expansion modules to increase the number of I/Os of a UMC100-FBP. Easy use of inputs by parametrizing for fault or warn-
ing; individual message on operator panel configurable.

Supply voltage 24 V DC
Inputs DX111 8 digital inputs 24 V DC
DX122 8 digital inputs 110/230 V AC
Outputs 4 relay outputs relay
1 analogue output, 0/4 to 20 mA / 0 to 10 V configurable
Fastening on DIN busbar (EN50022-35)
Dimensions (W x H x D) 45 x 77 x 100 mm (without terminal block)

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

 & s
ing elay
su
r r Motor control and protection
ea ng e
M itori ang Technical data
n R
mo CM
Voltage expansion modules
Measures the 3 phase voltages of a motor. Different versions for use in grounded and ungrounded networks.

Supply voltage 24 V DC
Inputs VI150 3 analogue inputs 150 - 690 V AC
For use in grounded networks
Maximum operation altitude 2000 m
6
VI155 3 analogue inputs 150 - 690 V AC
For use in all networks
Maximum operation altitude > 2000 m
Outputs 1 relay output
Fastening on DIN busbar (EN50022-35)
Dimensions (W x H x D) 22.5 x 77 x 100 mm (without terminal block)

Control panel UMC100-PAN

Installation on the device or on the switching cabinet door
Graphics-enabled and backlit display, 3 LEDs for status indication
Freely configurable error messages
Multilingual: German, English, French, Italian, Portuguese, Spanish, Russian

For more detailed information about the UMC100, see section 2, pages 2.16 and 2.17
Universal motor controller – 0.24…63 A
Catalog
Type Description
number
UMC100-FBP.0 Universal Motor Controller 1SAJ520000R0101
UMC100-FBP.2 Universal Motor Controller, ATEX 1SAJ520000R0201
UMC100-PAN Operating, diagnostics and parameter setting panel; direct UMC mounting 1SAJ590000R0102
UMCPAN-CAB.070 0.7 m ext. cable with door mounting set 1SAJ510003R0001
UMCPAN-CAB.150 1.5 m ext. cable with door mounting set 1SAJ510004R0001
UMCPAN-CAB.30 3 m ext. cable with door mounting set 1SAJ510002R0001
DTM software Advanced programming, parameter assignment 1SAJ924012R0004
Voltage Expansion Module, analog inputs 150…690V AC, 1 relay output, for
VI150-FBP.0 1SAJ650000R0100
3-phase networks (grounded)
UMC100-FBP
Voltage Expansion Module, analog inputs 150…690V AC, 1 relay output, for
VI155-FBP.0 1SAJ655000R0100
3-phase networks (all)

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]