Scribd
Upload
65 views

COM 181 Systems Architecture Coursework 1A: This Coursework Will Contribute Towards 30% of Your Total Marks

This coursework contributes 30% to the total marks for the COM 181 Systems Architecture course. Students must design a 4-bit Arithmetic Logic Unit (ALU) using logic gates that can perform 5 functions on 3 input numbers A, B, and C. Part 1 involves implementing each function separately. Part 2 integrates the components into a single ALU using control signals. Part 3 uses the ALU in a toy computer circuit. Part 4 involves describing the design of a general purpose computer using the ALU. Students must submit a report with their design and LogicSim files for evaluation.

Uploaded by

Philip Sjadi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
65 views

COM 181 Systems Architecture Coursework 1A: This Coursework Will Contribute Towards 30% of Your Total Marks

This coursework contributes 30% to the total marks for the COM 181 Systems Architecture course. Students must design a 4-bit Arithmetic Logic Unit (ALU) using logic gates that can perform 5 functions on 3 input numbers A, B, and C. Part 1 involves implementing each function separately. Part 2 integrates the components into a single ALU using control signals. Part 3 uses the ALU in a toy computer circuit. Part 4 involves describing the design of a general purpose computer using the ALU. Students must submit a report with their design and LogicSim files for evaluation.

Uploaded by

Philip Sjadi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

COM 181 Systems Architecture

Coursework 1A

This coursework will contribute towards 30% of your total marks.

Design a 4-bit Arithmetic Logic Unit (ALU) with basic logic blocks (Logic Gates, MUX). A complete
solution takes in three 4-bit unsigned numbers A, B and C and should be capable of doing
1. Compute the function F1 = A + 2*(B + C)
2. Computes a function F2 = A +2*( B – C)
3. Computes a function F3= 2’s complement of B
4. Computes F4 = (A/4) + 2*(B + C)
5. Computes F5 = (A*2) + 2*(B – C)

Part 1: Implement each of these components separately using basic gates- AND, OR, NOT. (Do not
use in-built functions from Logisim)

Part 2: Integrate these components to form a single ALU using control signals (Op-Sel) to choose any
one of the above five functions. Optimize the hardware if possible.

Part 3: A toy computer can be built using your ALU as shown in Figure 1. Use your ALU along with in-
built counter, ROMs, and RAM to implement this circuit in LogiSim. Test your circuit by storing
different values in ROM’s and observing the output in Output-RAM.

Figure 1. Toy CPU Circuit

Part 4: How will you design a general-purpose computer with the ALU that you designed? Describe
using diagrams.

Submission: Please submit (in BlackBoard) a report containing your design as a Word or PdF
document. Attach Logisim files ( .circ ) used for simulating your circuit.
Evaluation Scheme:

Part-1 Design of each component 3*5 =15 Marks 

Marks 0-1 1-2 3-3


Break-up

Part 1 Partially Truth table Truth table correct K-Maps /


Function-1 Implemented correct Equations and Design shown.
Equations Optimizations done
and Design  
shown.
 

Part 1 Partially Truth table Truth table correct K-Maps /


Function-2 Implemented correct Equations and Design shown.
Equations Optimizations done
and Design  
shown.
 

Part 1 Partially Truth table Truth table correct K-Maps /


Function-3 Implemented correct Equations and Design shown.
Equations Optimizations done
and Design  
shown.
 

Part 1 Partially Truth table Truth table correct K-Maps /


Function-4 Implemented correct Equations and Design shown.
Equations Optimizations done
and Design  
shown.
 

Part 1 Partially Truth table Truth table correct K-Maps /


Function 5 Implemented correct Equations and Design shown.
Equations Optimizations done
and Design  
shown.
 

 
Part-2 Integration of the components 5 marks 

Marks 0-2 2-3 3-5

Part 2 Partially Correctly Correctly Working. Optimizations done


working Working

 
Part-3 Toy CPU: 5 Marks 
 

Marks 0-3 3-5

Part 2 Partially Correctly Working


working
 
 
Part-4 Comment on general purpose Computer design: 5 Marks
Diagrams and explanation. Maximum word limit is 1000 words (soft limit). This limit is for Part 4 and
not for whole document.
Link to tutorial on BlackBoard assignment submission:

https://www.youtube.com/watch?v=oI3X0XW-xkI&feature=emb_logo

Feedback will be provided within 4 weeks of submission as per University policy through BBL.

You might also like