Scribd
Upload
125 views1 page

Infineon-Getting Started-Toolchain Installation Guide For MOTIX Embedded Power ICs (System-on-Chip) - DevelopmentTools-v01 00-EN

Uploaded by

Nik Name
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
125 views1 page

Infineon-Getting Started-Toolchain Installation Guide For MOTIX Embedded Power ICs (System-on-Chip) - DevelopmentTools-v01 00-EN

Uploaded by

Nik Name
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Getting Started - Toolchain Installation Guide for

MOTIX™ MCU (Embedded Power ICs)

Infineon MOTIX™ Embedded Power ICs are supported by a complete development toolchain provided by Infineon and third party vendors. The toolchain includes compilers, debuggers,
evaluation boards, low level drivers and configuration tools as well as variety of example software code.
For more information about the toolchain installation steps, watch our video "Toolchain Installation for Embedded Power ICs / TLE98xx".

Toolchain Installation Steps Company Description

Download and Install your • Arm® Keil® µVision and IAR Embedded Workbench® for ARM are two integrated development
preferred IDE environments which consist of code editor, compiler and debugger.
STEP 1 • To learn how to use Arm® Keil® µVision5, check out our video "Get your motor spinning".
a) Keil® µVision5 • IAR Embedded Workbench® is a holistic IDE for Arm devices, to generate, debug and compile
b) IAR Embedded Workbench® embedded applications efficiently and it is supported by MOTIX™ TLE984x and TLE897x.

• Infineon provides the Config Wizard free of charge which is designed for configuration of chip modules.
Download and install Config Wizard supports easy configuring of Embedded Power peripherals.
STEP 2
Config Wizard for MOTIX™ MCU • Config Wizard V2 can be installed via the Infineon Developer Center. If you don't have the Infineon
Developer Center yet, please click here to download and install it.

Download and Install


STEP 3 • SEGGER J-Link is a widely used driver for "on-board" or "stand-alone" debugger.
SEGGER J-Link Driver
Download the SDK
a) via µVision 5 Pack Installer (see • The Embedded Power Software Development Kit (SDK) is a low-level driver library which can be used in
step 1) Keil® µVision5 and IAR Embedded Workbench®.
STEP 4 b) from the Keil software packages • Note: For TLE984x, IAR Embedded Workbench® is supported from SDK v1.3.0 onwards.
webpage and import it to the For TLE987x, IAR Embedded Workbench® is supported from SDK v1.5.0 onwards.
CMSIS Manager of IAR Embedded
Workbench®

*If you still need the Config Wizard V1, please follow the link.

Copyright © Infineon Technologies AG 2022. All rights reserved.

You might also like