s 9 291

9291P01

DESIGO™ S7

CP 343-1 BACnet 6FL4343-1CX10-0XE0

Used with DESIGO S7, Building Solution & Building Integration

• SIMATIC S7.300 CP 343-1 for Industrial Ethernet TCP/IP with BACnet

communications as per EN 16484, part 5, SEND-RECEIVE and FETCH-
WRITE interface, long data, UDP, TCP, S7 communications (server),
routing, module exchange without programming device, 10/100 Mbit,
initialization over LAN, IP-Multicast, IP configuration over DHCP, firmware
V1.0.
• Communications services:
− Open IE communications (TCP/IP and UDP)
− Programming device / OP communications
− S7 communications (server)
− BACnet communications based on Ethernet/IP, BACnet server
as per EN16484, Part 5
− S5-compatible communications
• Connection for SIMATIC S7-300 to Ethernet
− 2 x RJ45 interface for 10/100 Mbps full/half-duplex connection
(with autosensing for automatic changeover and auto-crossover function).
− Integrated 2-port real-time switch ERTEC.
− Multiprotocol operations on TCP and UDP transport protocol and BACnet
− Keep Alive function
• Multicast over UDP.
• Full remote programming and initial commissioning possible over
Ethernet.
• Integration in network management over SNMP.

CM1N9291en_02
17 Sep 2009 Building Technologies
 • Engineering with NCM S7 for Ethernet (integrateable as of STEP 7 Version
V5.4 SP4 HF6 ).
• Cross-network PD/OP communications using S7 routing.
• Diagnostic functions in STEP 7 and via web browser.
• Direct integration of S7-300 in complex plants over Ethernet at 100 Mbps.
• Ideal for deployment on line-structure networks using integrated 2-port
real-time switch.
• Investment protection for existing plants by integrating SIMATIC S7-300
via S5-compatible communications.
• Flexible use thanks to free port selection.
• Saving space required for integration thanks to single-width design.
• Remote programming possible also via telephone network (e.g. ISDN)
thanks to TCP/IP's WAN properties.
• Multicast function to reach many members.
• Access of max. 4 operating and monitoring systems to SIMATIC S7-300.
• Use of socket interface in partner system possible without RFC 1006.
• Initial commissioning direct via Industrial Ethernet.
• Use of uncrossed connecting lines possible thanks to integrated auto
crossover function.
• Secure data communications via industrial-type device connection with IE
FC RJ45 plug 145/180 plug connector and additional strain relief thanks to
latching the connector to the housing.

Functions

The CP 343-1 BACnet handles all data traffic over Ethernet.

The module has its own processor. Layers 1 to 4 comply with international
standards.
Multi-protocol operation of transport protocols TCP/IP and UDP as well as BACnet
is possible.
The CP 343-1 BACnet has a preset, unique Ethernet address, allowing for
commissioning via network.
The CP 343-1 BACnet works in multi-protocol mode for the following
communications services:
BACnet BACnet (Building Automation Control Network) is a standardized layer 7-protocol
communications for building automation and control as per EN 16484, Part 5. It comprises:
− Standardized services processed autonomously by the CP.
− Standardized objects representing the user's view of automation and control.

The CP 343-1 is used with two market offering packages:

− DESIGO S7 Building Solution allows for using SIMATIC S7 within the DESIGO
system together with an S7-HVAC library following the DESIGO PX library.
Communications is via BACnet. Using an HVAC library allows for efficient
engineering of HVAC applications.
− DESIGO S7 Building Integration integrates existing SIMATIC S7 (software
without SBT HVAC LIB) in a DESIGO system over BACnet communications.
This allows for efficient integration. BACnet objects and their mapping to S7 data
is carried out in a mapping tool.

2/8

Siemens CP 343-1 BACnet – 6FL4343-1CX10-0XE0 CM1N9291en_02

Building Technologies 17 Sep 2009
 The standardized transport protocol UDP is used for BACnet/IP. In contrast to
TCP, UDP is a transport protocol for wireless communications.
The Ethernet IP address comprises IP address, subnet mask and default gateway.
BACnet devices within a subnet have the same subnet mask.
NoteBACnet also employs broadcasts to communicate data, i.e. all data receive
notification at the same time. Ethernet IP routers block broadcasts making direct
connection of an Ethernet subnet impossible. A BBMD (BACnet Broadcast
Management Device) allows for distributing broadcasts. DESIGO S7 and DESIGO
PX can be deployed as BBMDs.
Devices with integrated BBMD functionality, e.g. DESIGO automation stations, do
not generally allow for DHCP, i.e. automatic IP address assignment in networks.

Programming device / All S7 stations connected to the network can be remote programmed using PD/OP
OP communications communications.

S7 routing S7 routing allows for cross-network use of PD communications.

S7 communications Operating and monitoring devices and PCs (SOFTNET-S7 or CP 1613 A2 with S7-
1613) help connect S7-300 (server only) to S7-400.

Open IE- and S5- S5-compatible communications with SEND/RECEIVE offers a simple and
compatible optimized interface for communications based on Layer 4.
communications Max 8 KB data can be transmitted per incident.
This interface allows for using:
− TCP transport connections
− UDP
− Multicasts for UDP

Open IE and S5-compatible communications is used to communicate with

SIMATIC S5, SIMATIC S7-400 / -300 and PCs.
The function blocks required are a part of NCM S7 for Industrial Ethernet and must
be integrated in the S7 application program.
S5-compatible communications featuring FETCH / WRITE allows for direct access
to CPU data of SIMATIC S7 or SIMATIC S5.
The Multicast function can be used to simultaneously send and receive data to and
from engineered multicast members if UDP is the transport protocol.

3/8

Siemens CP 343-1 BACnet – 6FL4343-1CX10-0XE0 CM1N9291en_02

Building Technologies 17 Sep 2009
Diagnostics STEP 7 or the web browser offer comprehensive diagnostic options such as
• CP operating state
• General diagnostic and statistics functions
• Connection diagnostics
• LAN controller statistics
• Diagnostic buffer
• Web diagnosis with basic diagnostic information

SNMP allows for reading all MIB-2 objects. This in turn allows for querying the
current Ethernet interface status.

Type overview and order data

Type Description Order no.

Communication To connect SIMATIC S7-300 to Industrial Ethernet 6FL4343-1CX10-0XE0
processor CP 343-1 over TCP/IP and UDP, Multicast, S7-communications,
BACnet S5-compatible communications (SEND /RECEIVE),
FETCH/WRITE, integrated 2-port switch ERTEC,
comprehensive diagnostic functions, module exchange
without PD, SNMP, initial commissioning via LAN.
Note: CP343-1 BACnet can be used with market
offering Building Solution or Building Integration.
HVAC runtime license - DESIGO S7, Building Solution, ASN: 6FLD7-HLK-040
40 data points HVAC runtime license for up to 40 data points SSN: S55372-C101
HVAC runtime license - DESIGO S7, Building Solution, ASN: 6FLD7-HLK-125
125 data points HVAC runtime license for up to 125 data points SSN: S55372-C102
HVAC runtime license - DESIGO S7, Building Solution, ASN: 6FLD7-HLK-ALL
unlimited data points HVAC runtime license for unlimited data points SSN: S55372-C103
HVAC runtime license - DESIGO S7, Building Solution, ASN: 6FLD7-040-125
upgrade 40 to 125 Upgrade license for from 40 to 125 data points SSN: S55372-C104
HVAC runtime license - DESIGO S7, Building Solution, ASN: 6FLD7-125-ALL
upgrade 125 to unlimited Upgrade license for from 125 to unlimited data points SSN: S55372-C105
HVAC runtime license - DESIGO S7, Building Solution, ASN: 6FLD7-040-ALL
upgrade 040 to unlimited Upgrade license for from 40 to unlimited data points SSN: S55372-C106
BACnet runtime license- DESIGO S7, Building Integration ASN: 6FLD7-INT-ALL
BACnet integration runtime license for 1CPU without SSN: S55372-C107
HVAC standard blocks
IE FC TP standard cable 4-wire, screened TP installation line to connect to IE 6XV1 840-2AH10
GP 2x2 FC outlet RJ45/ IE FC RJ45 plug; PROFINET
compliant; with UL approval; Meterware
FO standard cable GP Standard line, divisible, UL approval, Meterware 6XV1 873-2A
(50/125)
Industrial Ethernet switch Industrial Ethernet switches with integrated SNMP 6GK5 204-2BB00-2AA3
SCALANCE X204-2 access, web diagnosis, copper cable diagnosis, and
PROFINET diagnosis, to create line, star and ring
structures; four 10/100 Mbps RJ45 ports and two LWL
ports.

4/8

Siemens CP 343-1 BACnet – 6FL4343-1CX10-0XE0 CM1N9291en_02

Building Technologies 17 Sep 2009
Type Description Order no.
IE FC RJ45 plug 145 RJ45 plug for Industrial Ethernet with robust metal
housing and integrated insulation displacement
terminal contacts to connect Industrial Ethernet FC
installation lines;
with 145° cable outlet;
• 1 package = 1 item 6GK1 901-1BB30-0AA0

• 1 package = 10 items 6GK1 901-1BB30-0AB0

• 1 package = 50 items 6GK1 901-1BB30-0AE0

Engineering software Engineering software NCM S7 Version V5.4 for Part of STEP 7 V5.4
NCM S7 for Industrial Industrial Ethernet CPs, from STEP 7 V5.4; additional scope of delivery
Ethernet hardware support package (HSP); 1)
documentation on CD-ROM, with electronic manuals in
German, English, French, Spanish, Italian.
Documentation for S7 - For Industrial Ethernet and PROFIBUS; package of
CPs/NCM S7 manuals to engineer S7-CPs, IE/PB link and PC
stations (STEP 7 from V5.3).
• German 6GK7 080-0AA01-8AA0

• English 6GK7 080-0AA01-8BA0

1) The HSP for CP 343-1 BACnet (6FL4343-1CX10-0XE0) can be downloaded and installed directly via STEP
7 from the Internet, and can be integrated from STEP 7 Version V5.4 SP4 HF6.
CFC 7.0 SP11, S7 SCL from 5.3 SP2 are required for Building Solution

Mechanical design

The CP 343-1 BACnet offers all benefits of SIMATIC S7-300 technology:

• Compact design;
The robust plastic housing contains the following on the front:
− Two RJ45 plugs to connect to Industrial Ethernet using auto-sensing;
RJ45 plugs are designed for industrial use with additional retaining collar
concept to connect IE FC RJ45 Plug 145/180.
− Diagnosis LEDs for each switch port.
− 2-pin, plug-in terminal bar to connect external 24 VDC power supply.
• Easy mounting;
Mount the CP 343-1 BACnet on the profile bar of the S7-300 and connect to
neighboring modules via bus connectors.
There are no rules for plug assignment.
• The CP 343-1 BACnet can be operated without fan.
No buffer battery required.
• The CP 343-1 BACnet can also be used in the extension rack ER together with
IM 360/361.
• The module can be exchanged without programming device.

5/8

Siemens CP 343-1 BACnet – 6FL4343-1CX10-0XE0 CM1N9291en_02

Building Technologies 17 Sep 2009
Engineering notes

STEP 7 V5.4 SP4 or higher and NCM S7 for Industrial Ethernet plus hardware
support package (HSP) is required to engineer CP 343-1, CP343-1 BACnet
(6FL4343-1CX10-0XE0) inclusive. The engineering data of the CP are saved to the
CPU. This allows for module group exchange without PG.

Visit our SIMATIC NET homepage on the Internet at:

http://www.automation.siemens.com/net/index_76.htm
This is where you find information on our products and solutions along with news
on SIMATIC NET as well as information on events and professional publications.

See
https://mall.automation.siemens.com/de/guest/guiRegionSelector.asp?lang=en
for a description of the SIMATIC NET products.

For technical issues on CP343-1 BACnet, contact:

Common Support Entry:
Siemens Switzerland Ltd
SBT HQ
Tel: +41 (0) 41 724 5500
Fax: +41 (0) 41 724 5501
Email: [email protected]

6/8

Siemens CP 343-1 BACnet – 6FL4343-1CX10-0XE0 CM1N9291en_02

Building Technologies 17 Sep 2009
Technical data

Operating data Power supply connection 1 x 2-pin pluggable terminal bar

Power supply DC +24 V
permitted range +20.4 V ... +28.8 V
Power consumption from backplane bus Max. 200 mA.
Power consumption from DC 24 V external Typically 160 mA
Max. 200 mA
Power loss 5.8 W

Interfaces Communication connection, electric 2 x RJ45 plug

(10/100 Mbps; TP)
Auto negotiation/Auto crossover
function

Engineering software NCM S7 for Industrial Ethernet

(part of STEP 7 V5.4 scope of
delivery)
Communications
Transfer rate 10 / 100 Mbps, autosensing
Open IE /S5-compatible communications (SEND/RECEIVE)
Max. simultaneously possible TCP/UDP Max. 8
connections
Amount of data
− TCP 8 KB
− UDP 2 KB

S7 communications Number of connections Max. 4

PD/OP communications Number of working OP connections Max. 4

(acyclical services)

Multi-protocol mode Max. simultaneously possible connections Max. 12

Multicast 8
BACnet BACnet is wireless allows for
communications with any number of
partners

Permissible ambient Operating temperature 0 °C to + 60 °C

conditions Transport/storage temperature - 40 °C to + 70 °C
Relative humidity Max. 95% at + 25 °C

Design Modular format Compact module S7-300,

single width

Dimensions, weight Dimensions (W x H x D) in mm 40 x 125 x 120

Weight Approx. 200 g

7/8

Siemens CP 343-1 BACnet – 6FL4343-1CX10-0XE0 CM1N9291en_02

Building Technologies 17 Sep 2009
System limits

What DESIGO S7
Configured alarm recipient 30
(Number of entries on the NC recipient list).
BACnet references
COV server resource COV subscription execute. approx. 50-200
BACnet references
COV-Client COV subscriptions………………… approx. 400
Resources.
BACnet object in the CP for building integration. approx. 1000
Number of BACnet I/O objects including typical HVAC
application (*) for building solution
CPU 314 ..314-1AG13 / 96 KB approx. 20
CPU 314 ..314-1AG14 / 128 KB approx. 40
CPU 315-2DP ..315-2AG10 / 128 KB approx. 40
CPU 315-PN/DP ..315-2AH14 / 256 KB approx. 150
CPU 315-PN/DP ..315-2EG10 / 128 KB approx. 40
CPU 315-PN/DP ..315-2EH13 / 256 KB approx. 50
CPU 317-2DP ..317-2AJ10 / 512 KB approx. 200
CPU 317-PN/DP ..315-2EJ13 / 512 KB approx. 200
CPU 317-PN/DP ..315-2EK13 / 1000 KB approx. 200
CPU 317-PN/DP ..317-2EK14 / 1000 KB approx. 800
CPU 319-PN/DP ..318-3EL00 / 1400 KB approx. 800
Number of function block instances in the CFC chart. 32767
Trend Log – limited only be available RAM in the CPU. Depends on RAM.
Scheduler – limited only be available RAM in the CPU. Depends on RAM.
Calendar – limited only be available RAM in the CPU. Depends on RAM.
Max. number of TP177 on a CPU. 3
Maximum number of CPUs on a TP177. 4
Physical data points, see datasheet for the CPU. Depends on CPU.

(*) A calculation table is available for a more precise calculation.

8/8  2009 Siemens Switzerland Ltd Subject to change

Siemens CP 343-1 BACnet – 6FL4343-1CX10-0XE0 CM1N9291en_02
Building Technologies 17 Sep 2009