Scribd
Upload
45 views

Mock Midterm Dynamics

This document contains a mock exam for a course on mechanics with 21 multiple choice questions. It provides figures and descriptions of mechanical systems to be analyzed. Students are instructed to calculate values like angular velocity, linear velocity, and acceleration at given time points or configurations. The exam is intended for practice only and utilizes example problems from the course textbook.

Uploaded by

Marc Goel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views

Mock Midterm Dynamics

This document contains a mock exam for a course on mechanics with 21 multiple choice questions. It provides figures and descriptions of mechanical systems to be analyzed. Students are instructed to calculate values like angular velocity, linear velocity, and acceleration at given time points or configurations. The exam is intended for practice only and utilizes example problems from the course textbook.

Uploaded by

Marc Goel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

MOCK EXAM (FOR PRACTICE ONLY)

COURSE: MAAE 2101 AB FACILITATOR NAME: Mikhail Chizhov

Further instructions:
 Read each question carefully (21 total questions)
 Calculator use allowed
 Formula sheet provided at end of the booklet
 Leave question blank if answer is none of the above

Use Figure 1 for Questions 1-3.


1. The angular acceleration of the disk is defined as 2t 2 + 9 rad/s2 (t is in seconds). The original
rotation ωo is 8 rad/s. Determine the angular velocity of point A at t = 3 s.

2. What is the velocity of point A at t = 3 s?

Figure 1. [1, p 331]


3. What is the acceleration of point B at the instant t = 4s?
MOCK EXAM (FOR PRACTICE ONLY)
COURSE: MAAE 2101 AB FACILITATOR NAME: Mikhail Chizhov

Use Figure 2 to answer Questions 4-8. Where θ is 35 o and b is 2 meters.

4. Point A is a peg which is constrained to move in


Figure 2. [1, p 343]
the vertical guide and the rotating slotted rod.
What is the velocity of A as a function of time?

5. When α = 1.5 rad/s2 and ω = 3.5 rad/s, what is the


acceleration of A?

6. The distance vector rA/IC for A from the instantaneous center of zero velocity is?
MOCK EXAM (FOR PRACTICE ONLY)
COURSE: MAAE 2101 AB FACILITATOR NAME: Mikhail Chizhov

Use Figure 3 to answer


Questions 7-8.

Figure 3. [1, p 358]

7. What would be the angular velocity of link AB and the speed of block B?

8. What would be the angular velocity of link CE and the velocity of block C and point E?
MOCK EXAM (FOR PRACTICE ONLY)
COURSE: MAAE 2101 AB FACILITATOR NAME: Mikhail Chizhov

Use Figure 4 to answer Question 9.

Figure 4. [1, p 371]

9. What would the magnitude and direction of the velocity of point E and D.
MOCK EXAM (FOR PRACTICE ONLY)
COURSE: MAAE 2101 AB FACILITATOR NAME: Mikhail Chizhov

Figure 5. [1, p 398]


Use Figure 5 to answer Question 10. The crane has an
arm (boom) that is extending with a constant speed of
0.5 ft/s relative to the crane (at A). Determine the
magnitude of velocity and acceleration of point B in the
current instance.

10. What would be the velocity of point B and the


absolute acceleration of point B.
MOCK EXAM (FOR PRACTICE ONLY)
COURSE: MAAE 2101 AB FACILITATOR NAME: Mikhail Chizhov

You might also like